{ "ldp": {} }

Attribute	Description
instance-id	LDP instance identifier.
keepalive-time	LDP session keepalive time in seconds. The keepalive-time defines the local LDP session keepalive timeout. Each LDP peer must calculate the effective keepalive timeout by using the smaller of its locally defined and received timeout in the PDU. The value chosen indicates the maximum number of seconds that may elapse between the receipt of successive PDUs from the LDP peer on the session TCP connection. The keepalive timeout is reset each time a PDU arrives. The BNG Blaster will send keepalive messages at an interval calculated by using the effective keepalive time divided by 3. Assuming an effective keepalive time of of 15 seconds results in a keepalive interval of 5 seconds. Default: 15 Range: 0 - 65535
hold-time	LDP hello hold time in seconds. Default: 15 Range: 0 - 65535
teardown-time	LDP teardown time in seconds. Default: 5 Range: 0 - 65535
hostname	LDP hostname. Default: bngblaster
lsr-id	LDP LSR identifier. Default: 10.10.10.10
ipv6-transport-address	LDP transport IPv6 address. Setting a valid IPv6 address here enables LDP IPv6 hello and transport.
ipv4-transport-address	LDP transport IPv4 address. Default: lsr-id
no-ipv4-transport	Disable/discard IPv4 LDP hello messages.
prefer-ipv4-transport	According to RFC7552, IPv6 is preferred over IPv4 which can be changed with this option to prefer IPv4 transport even if IPv6 is enabled. Default: false
raw-update-file	LDP RAW update file.