{ "interfaces": { "access": [] } }
Attribute |
Description |
|---|---|
interface |
Parent interface/link name (e.g. eth0, …).
|
network-interface |
Select the corresponding network interface for those sessions.
Default: first network interface from configuration
|
a10nsp-interface |
Select the corresponding A10NSP interface for those sessions.
Default: first a10nsp interface from configuration
|
type |
Set access type (pppoe or ipoe).
Default: pppoe
|
vlan-mode |
Set VLAN mode to 1:1 or N:1.
Default: 1:1
|
qinq |
Set outer VLAN ethertype to QinQ (0x88a8).
Default: false
|
outer-vlan-min |
Outer VLAN minimum value.
Default: 0 (untagged)
|
outer-vlan-max |
Outer VLAN maximum value.
Default: 0 (untagged)
|
outer-vlan-step |
Outer VLAN step (iterator).
Default: 1
|
outer-vlan |
Set outer-vlan-min/max equally.
|
inner-vlan-min |
Inner VLAN minimum value.
Default: 0 (untagged)
|
inner-vlan-max |
Inner VLAN maximum value.
Default: 0 (untagged)
|
inner-vlan-step |
Inner VLAN step (iterator).
Default: 1
|
inner-vlan |
Set inner-vlan-min/max equally.
|
third-vlan |
Add a static third VLAN (most inner VLAN).
Default: 0 (untagged)
|
ipv4 |
Set false to deactivate IPv4.
|
ipv6 |
Set false to deactivate IPv6.
|
address |
Static IPv4 base address (IPoE only).
|
address-iter |
Static IPv4 base address iterator (IPoE only).
Default: 0.0.0.0
|
gateway |
Static IPv4 gateway address (IPoE only).
|
gateway-iter |
Static IPv4 gateway address iterator (IPoE only).
Default: 0.0.0.0
|
cfm-cc |
Enable EOAM CFM CC (IPoE only).
Default: false
|
cfm-level |
Set EOAM CFM maintenance domain level.
Default: 0 Range: 0 - 7
|
cfm-ma-id |
Set EOAM CFM maintenance association identifier.
Default: 0 Range: 0 - 65535
|
cfm-ma-name |
Set EOAM CFM maintenance association short name (string).
|
username |
Overwrite the username from the authentication section.
|
password |
Overwrite the password from the authentication section.
|
authentication-protocol |
Overwrite the username from the authentication section.
|
agent-circuit-id |
Overwrite the agent-circuit-id from the access-line section.
|
agent-remote-id |
Overwrite the agent-remote-id from the access-line section.
|
access-aggregation-circuit-id |
Overwrite the access-aggregation-circuit-id from the
access-line section.
|
rate-up |
Overwrite the rate-up from the access-line section.
|
rate-down |
Overwrite the rate-down from the access-line section.
|
dsl-type |
Overwrite the dsl-type from the access-line section.
|
ppp-mru |
Overwrite PPP MRU (PPPoE only).
|
ipcp |
Overwrite PPP IPCP enable option (PPPoE only).
|
ip6cp |
Overwrite PPP IP6CP enable option (PPPoE only).
|
dhcp |
Overwrite DHCP enable option.
|
dhcpv6 |
Overwrite DHCPv6 enable option.
|
dhcpv6-ldra |
Overwrite DHCPv6 LDRA option.
|
igmp-autostart |
Overwrite IGMP autostart option.
|
igmp-version |
Overwrite IGMP protocol version (1, 2, or 3).
|
session-group-id |
Set session group identifier.
Default: 0 Range: 0 - 65535
|
stream-group-id |
Set stream group identifier.
Default: 0 Range: 0 - 65535
|
access-line-profile-id |
Set access-line-profile identifier.
Default: 0 Range: 0 - 65535
|
i1-start |
Iterator {i1} start value.
Default: 1 Range: 0 - 4294967295
|
i1-step |
Iterator {i1} step per session.
Default: 1 Range: 0 - 4294967295
|
i2-start |
Iterator {i2} start value.
Default: 1 Range: 0 - 4294967295
|
i2-step |
Iterator {i2} step per session.
Default: 1 Range: 0 - 4294967295
|
monkey |
Enable monkey testing.
Default: false
|