.. code-block:: json { "access-line-profiles": [] } .. list-table:: :widths: 25 50 25 :header-rows: 1 * - Attribute - Description - Default * - `access-line-profile-id` - Mandatory access-line-profile identifier - * - `act-up` - Actual Data Rate Upstream - 0 * - `act-down` - Actual Data Rate Downstream - 0 * - `min-up` - Minimum Data Rate Upstream - 0 * - `min-down` - Minimum Data Rate Downstream - 0 * - `att-up` - Attainable DataRate Upstream - 0 * - `att-down` - Attainable DataRate Downstream - 0 * - `max-up` - Maximum Data Rate Upstream - 0 * - `max-down` - Maximum Data Rate Downstream - 0 * - `min-up-low` - Min Data Rate Upstream in low power state - 0 * - `min-down-low` - Min Data Rate Downstream in low power state - 0 * - `max-interl-delay-up` - Max Interleaving Delay Upstream - 0 * - `act-interl-delay-up` - Actual Interleaving Delay Upstream - 0 * - `max-interl-delay-down` - Max Interleaving Delay Downstream - 0 * - `act-interl-delay-down` - Actual Interleaving Delay Downstream - 0 * - `data-link-encaps` - Data Link Encapsulation - 0 * - `dsl-type` - DSL Type - 0 * - `pon-type` - PON Access Type - 0 * - `etr-up` - Expected Throughput (ETR) Upstream - 0 * - `etr-down` - Expected Throughput (ETR) Downstream - 0 * - `attetr-up` - Attainable Expected Throughput (ATTETR) Upstream - 0 * - `attetr-down` - Attainable Expected Throughput (ATTETR) Downstream - 0 * - `gdr-up` - Gamma Data Rate (GDR) Upstream - 0 * - `gdr-down` - Gamma Data Rate (GDR) Downstream - 0 * - `attgdr-up` - Attainable Gamma Data Rate (ATTGDR) Upstream - 0 * - `attgdr-down` - Attainable Gamma Data Rate (ATTGDR) Downstream - 0 * - `ont-onu-avg-down` - ONT/ONU Average Data Rate Downstream - 0 * - `ont-onu-peak-down` - ONT/ONUPeak Data Rate Downstream - 0 * - `ont-onu-max-up` - ONT/ONU Maximum Data Rate Upstream - 0 * - `ont-onu-ass-up` - ONT/ONU Assured Data Rate Upstream - 0 * - `pon-max-up` - PON Tree Maximum Data Rate Upstream - 0 * - `pon-max-down` - PON Tree Maximum Data Rate Downstream - 0 Attributes with values set to 0 will not be sent. The values for ``rate-up``, ``rate-down`` and ``dsl-type`` defined in the access-line or interface section has priority over those defined here.