{ "streams": {} }
Attribute |
Description |
Default |
|---|---|---|
name |
Mandatory stream name |
|
stream-group-id |
Stream group identifier |
0 (raw) |
type |
Mandatory stream type (ipv4, ipv6 or ipv6pd) |
|
direction |
Mandatory stream direction (upstream, downstream or both) |
both |
priority |
IPv4 TOS / IPv6 TC |
0 |
vlan-priority |
VLAN priority |
0 |
length |
Layer 3 (IP + payload) traffic length (76 - 9000) |
128 |
pps |
Stream traffic rate in packets per second |
1 |
bps |
Stream traffic rate in bits per second (layer 3) |
|
a10nsp-interface |
Select the corresponding A10NSP interface for this stream |
|
network-interface |
Select the corresponding network interface for this stream |
|
network-ipv4-address |
Overwrite network interface IPv4 address |
|
network-ipv6-address |
Overwrite network interface IPv6 address |
|
destination-ipv4-address |
Overwrite the IPv4 destination address |
|
destination-ipv6-address |
Overwrite the IPv6 destination address |
|
access-ipv4-source-address |
Overwrite the access IPv4 source address (client) |
|
access-ipv6-source-address |
Overwrite the access IPv6 source address (client) |
|
threaded |
Run those streams in separate threads |
false |
thread-group |
Assign this stream to thread group (1-255) |
0 (thread per stream) |
max-packets |
Send a burst of N packets and stop |
0 (infinity) |
start-delay |
Wait N seconds after session is established before start |
0 |
tx-label1 |
MPLS send (TX) label (outer label) |
|
tx-label1-exp |
EXP bits of first label (outer label) |
0 |
tx-label1-ttl |
TTL of first label (outer label) |
255 |
tx-label2 |
MPLS send (TX) label (inner label) |
|
tx-label2-exp |
EXP bits of first label (inner label) |
0 |
tx-label2-ttl |
TTL of first label (inner label) |
255 |
rx-label1 |
Expected receive MPLS label (outer label) |
|
rx-label2 |
Expected receive MPLS label (inner label) |
For L2TP downstream traffic the IPv4 TOS is applied to the outer IPv4 and inner IPv4 header.
The pps option supports also float numbers like 0.1, or 2.5 PPS and has
priority over bps where second is only a helper to calculate the pps
based on given bps and length.
The options access-ipv4-source-address and access-ipv6-source-address
are used to test the BNG RPF functionality with traffic send from source addresses
different to those assigned to the client.