mirror of
https://github.com/rtbrick/bngblaster.git
synced 2024-05-06 15:54:57 +00:00
Christian Giese
52 lines
4.6 KiB
ReStructuredText
52 lines
4.6 KiB
ReStructuredText
.. code-block:: json
|
|
|
|
{ "ldp": {} }
|
|
|
|
+----------------------------------+------------------------------------------------------------+
|
|
| Attribute | Description |
|
|
+==================================+============================================================+
|
|
| **instance-id** | | LDP instance identifier. |
|
|
+----------------------------------+------------------------------------------------------------+
|
|
| **keepalive-time** | | LDP session keepalive time in seconds. |
|
|
| | | The **keepalive-time** defines the local LDP session |
|
|
| | | keepalive timeout. Each LDP peer must calculate the |
|
|
| | | effective keepalive timeout by using the smaller of its |
|
|
| | | locally defined and received timeout in the PDU. The |
|
|
| | | value chosen indicates the maximum number of seconds |
|
|
| | | that may elapse between the receipt of successive PDUs |
|
|
| | | from the LDP peer on the session TCP connection. The |
|
|
| | | keepalive timeout is reset each time a PDU arrives. The |
|
|
| | | BNG Blaster will send keepalive messages at an interval |
|
|
| | | calculated by using the effective keepalive time divided |
|
|
| | | by 3. Assuming an effective keepalive time of of 15 |
|
|
| | | seconds results in a keepalive interval of 5 seconds. |
|
|
| | | Default: 15 Range: 0 - 65535 |
|
|
+----------------------------------+------------------------------------------------------------+
|
|
| **hold-time** | | LDP hello hold time in seconds. |
|
|
| | | Default: 15 Range: 0 - 65535 |
|
|
+----------------------------------+------------------------------------------------------------+
|
|
| **teardown-time** | | LDP teardown time in seconds. |
|
|
| | | Default: 5 Range: 0 - 65535 |
|
|
+----------------------------------+------------------------------------------------------------+
|
|
| **hostname** | | LDP hostname. |
|
|
| | | Default: bngblaster |
|
|
+----------------------------------+------------------------------------------------------------+
|
|
| **lsr-id** | | LDP LSR identifier. |
|
|
| | | Default: 10.10.10.10 |
|
|
+----------------------------------+------------------------------------------------------------+
|
|
| **ipv6-transport-address** | | LDP transport IPv6 address. |
|
|
| | | Setting a valid IPv6 address here enables LDP IPv6 |
|
|
| | | hello and transport. |
|
|
+----------------------------------+------------------------------------------------------------+
|
|
| **ipv4-transport-address** | | LDP transport IPv4 address. |
|
|
| | | Default: `lsr-id` |
|
|
+----------------------------------+------------------------------------------------------------+
|
|
| **no-ipv4-transport** | | Disable/discard IPv4 LDP hello messages. |
|
|
+----------------------------------+------------------------------------------------------------+
|
|
| **prefer-ipv4-transport** | | According to RFC7552, IPv6 is preferred over IPv4 which |
|
|
| | | can be changed with this option to prefer IPv4 transport |
|
|
| | | even if IPv6 is enabled. |
|
|
| | | Default: false |
|
|
+----------------------------------+------------------------------------------------------------+
|
|
| **raw-update-file** | | LDP RAW update file. |
|
|
+----------------------------------+------------------------------------------------------------+ |