The libbpf API has deprecated a number of functions used by the pping
loader. While a couple of functions have simply been renamed,
bpf_object__find_program_by_title has been completely deprecated in
favor of bpf_object__find_program_by_name. Therefore, change so that
BPF programs are found based on the C function names rather than
section names.
Also remove defines of section names as they are no longer used, and
change the section names in pping_kern.c to use "tc" instead of
"classifier/ingress" and "classifier/egress".
Finally replace the flags json_format and json_ppviz in pping_config
with a single enum for the different output formats. This makes the
logic for which output format to use clearer compared to relying on
multiple (supposedly) mutually exclusive flags (and implicitly
assuming standard format if neither flag was set).
One potential concern with this commit is that it introduces some
"magical strings". In case the function names in pping_kern.c are
changed it will require multiple changes in pping.c.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
For some machines, XDP may not be suitable due to ex. lack of XDP
support in NIC drivers or another program already being attached to
the XDP hook on the desired interface. Therefore, add an option to use
the tc-ingress hook instead of XDP to attach the pping ingress BPF
program on.
In practice, this adds an additional BPF program to the object file (a
TC ingress program). To avoid loading an unnecessary BPF program, also
explicitly disable autoloading for the ingress program not selected.
Also, change the tc programs to return TC_ACT_OK instead of
BPF_OK. While both should be compatible, the TC_ACT_* return codes
seem to be more commonly used for TC-BPF programs.
Concerns with this commit:
- The error messages for XDP attach failure has gotten slightly less
descriptive. I plan to improve the code for attaching and detaching
XDP programs in a separate commit, and will then address that.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Simplify the three output functions by breaking them up into smaller
helper functions. Also introduce the pping_event union, which can hold
either an rtt_event or flow_event.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Make the flow_timeout function call the current output function to
simulate a flow-closing event. Also some other minor cleanup/fixes.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Add "flow events" (flow opening or closing so far) which will trigger
a printout of message.
Note: The ppviz format will only print out the traditional rtt events
as the format does not include opening/closing messages.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Add per-flow tracking of number of packets and bytes
sent/received. Add these to the JSON output format.
Also update README regarding concurrency issue when updating these
statistics.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
To add timestamp to output, push the timestamp when packet was
processed from kernel as part of the rtt-event. Also keep track of
minimum encountered RTT for each flow in kernel, and also push that as
part of the RTT-event.
Additionally, avoid pushing RTT messages at all if no flow-state
information can be found (due to ex. being deleted from egress side),
as no valid min-RTT can then be given. Furthermore, no longer delete
flow-information once seeing the FIN-flag on egress in order to keep
useful flow-state around for RTT-messages longer. Due to the
FIN-handshake process, it is sufficient if the ingress program deletes
the flow-state upon seeing FIN. However, still delete flow-state from
either ingress or egress upon seeing RST flag, as RST does not have a
handshake process allowing for delayed deletion.
While minimum RTT could also be tracked from the userspace process,
userspace is not aware of when the flow is closed so would have to add
additional logic to keep track of minimum RTT for each flow and
periodically clean them up. Furthermore, keeping RTT statistics in the
flow-state map is useful for implementing future features, such as an
RTT-based sampling interval. It would also be useful in case pping is
changed to no longer have a long-running userspace process printing
out all the calculated RTTs, but instead simply occasionally looks up
the RTT from the flow-state map.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Merge the pping_kern_tc.c, pping_kern_xdp.c and pping_helpers.h into
the single file pping_kern.c. Do not change any of the BPF code,
except renaming the map ts_start to packet_ts.
To handle both BPF programs kept in single ELF-file, change loading
mechanism to extract and attach both tc and XDP programs from it. Also
refactor main-method into several smaller functions to reduce its
size.
Finally, added the --force (-f) and --cleanup-interval (-c) options to
the argument parsing, and improved the parsing of the
--rate-limit (-r) option.
NOTE: The verifier rejects program in it's current state as too
large (over 1 million instructions). Setting the TCP_MAX_OPTIONS in
pping_kern.c to 5 (or less) solves this. Unsure at the moment what
causes the verifier to think the program is so large, as the code in
pping_kern.c is identical to the one from the three files it was
merged from.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Implement basic mechanic for parsing arguments from userspace and
passing them to a global config variable in the BPF programs.
This also changes the basic use of the program from:
$./pping interface
to:
$./pping -i interface
Also, revert to using the memset solution for the map_ipv4_to_ipv6
function to avoid the ipv4_prefix constant being stored in the .rodata
section. This makes it easier to set the value for the global config
variable from userspace, as the only thing left in the .rodata section
is the config struct.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Load and pin the tc-bpf program in pping.c using libbpf, and only
attach the pinned program using iproute. That way, can use features
that are not supported by the old iproute loader, even if iproute does
not have libbpf support.
To support this change, extend bpf_egress_loader with option to load
pinned program. Additionally, remove configure script and parts of
Makefile that are no longer needed. Furthermore, remove multiple
definitions of ts_start map, and place singular definition in
pping_helpers.h which is included by both BPF programs.
Also, some minor fixes based on Toke's review.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Add a per-flow rate limit, limiting how often new timestamp entries
can be created. As part of this, add per-flow state keeping track
of when last timestamp was created and last seen identifier for each
flow.
Additionally, remove timestamp entry as soon as RTT is
calculated, as last seen identifier is used to find first unique value
instead. Furthermore, remove packet_timestamp struct and only use
__u64 as timestamp, as used memeber is no longer needed.
This initial commit lacks cleanup of flow-state, user-configuration of
rate limit, mechanism to handle bursts etc.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Refactor TC and XDP programs to reuse common logic for parsing
packets. Add functions for parsing packets for an identifier to
pping_helpers.h which both TC and XDP parts use. Also make it easier
to extend pping with support for new protocols, as only new parsing
functions have to be added and inserted into a single place.
Also add reserved members to end of structs in pping.h to indicate
padding.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Move some members in network_tuple and rtt_event around to avoid holes.
Also remove some uncecessary parentheses before & operator, and add
local definitions of AF_INET and AF_INET6.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Several changes to add IPv6 support:
- Change structs in pping.h
- replace ipv4_flow with network_tuple
- rename ts_key to packet_id
- rename ts_timestamp to packet_timestamp
- Add map_ipv4_to_ipv4 in pping_helpers.h
- Also remove obsolete fill_ipv4_flow
- Rewrite pping_kern*
- parse either IPv4 or IPv6 header (depending on proto)
- Use map_ipv4_to_ipv6 to store IPv4 address in network_tuple
Support printout of IPv6 addresses in pping.c
- Add function format_ip_address as wrapper over inet_ntop
- Change handle_rtt_event to first format IP-address strings in
local buffers, then perform single printout
While some steps have been taken to be more general towards different
types of packet identifiers (not just the currently supported TCP
timestamps), significant refactorization of pping_kern* will still be
required. Also, pping_kern_xdp and pping_kern_tc also have large
sections of very similar code that can be refactored into functions.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Perform various fixes and tweaks:
- Rename several defines to make them more informative
- Remove unrolling of loop in BPF programs
- Reuse defines for program sections between userspace and kernel
space programs
- Perform fork+exec to run bpf_egress_loader script instead of
system()
- Add comment to copied scripts indicating I've modified them
- Add pping.h and pping_helpers.h as dependencies in Makefile
Also, add a brief description of what PPing is and how it works to
README
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Format the header files in the Linux kernel style (missed in previous
commit). Also fix a formating error in TODO.md that cause empty
checkboxes to not display correctly.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Format the code using the .clang-format from the kernel source tree,
with a few manual tweaks here and there. Also, remove the TODO list
from comment of pping.c and instead put it in TODO.md.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Make tc pin the ts_start map when loading the TC-BPF program, and
rewrite XDP loader to reuse map pinned by tc.
Also add comment with TODO list in pping.c.
Testing pping by adding a delay through a netem qdisc in the test
environment shows that the reported RTT will approach 100ms for any
delay lower than 100ms, but the correct RTT for any delay over
100ms. Root cause is unknown, but Pollere's original pping
implementation (as well as a bpftrace based pping implementation)
shows the same issue. This issue has not been observed when running on
real interfaces without a netem qdisc.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Split and rename files so there is one userspace program (pping) and
two kernel-space ones (one for XDP and one for TC-BPF).
Copy the shell script for loading the TC-BPF program from
traffic-pacing-edt folder, but add support for loading a specific
section.
The XDP and TC-BPF programs do not share the ts_start map, so program
does not work.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
