man: fix merge errors

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>

man.rst/ifquery.8.rst

@@ -33,12 +33,8 @@ DESCRIPTION
 
     **ifquery** always works on the current **interfaces(5)** file
     **/etc/network/interfaces** unless an alternate interfaces file is
-<<<<<<< HEAD
-    provided with the **-i** option.
-=======
     defined in ifupdown2.conf or provided with the **-i** option.
     Note: the -i option is disabled by default in ifupdown2.conf.
->>>>>>> cumulus/dev
 
 OPTIONS
 =======
@@ -65,12 +61,6 @@ OPTIONS
     -X EXCLUDEPATS, --exclude EXCLUDEPATS
                           Exclude interfaces from the list of interfaces to
                           operate on. Can be specified multiple times
-<<<<<<< HEAD
-
-    -i INTERFACESFILE, --interfaces INTERFACESFILE
-                          Use interfaces file instead of default
-                          /etc/network/interfaces
-=======
                           If the excluded interface has dependent interfaces,
                           (e.g. a bridge or a bond with multiple enslaved interfaces)
                           then each dependent interface must be specified in order
@@ -79,7 +69,6 @@ OPTIONS
     -i INTERFACESFILE, --interfaces INTERFACESFILE
                           Use interfaces file instead of default
                           defined in ifupdown2.conf (default /etc/network/interfaces)
->>>>>>> cumulus/dev
 
     -t {native,json}, --interfaces-format {native,json}
                           interfaces file format

man.rst/ifreload.8.rst

@@ -14,20 +14,12 @@ reload network interface configuration
 
 SYNOPSIS
 ========
-<<<<<<< HEAD
-    ifreload [-h] (-a|-c) [-v] [-d] [-f] [-n] 
-
-DESCRIPTION
-===========
-    reloads network **interfaces(5)** file **/etc/network/interfaces**.
-=======
     ifreload [-h] (-a|-c) [-v] [-d] [-f] [-n] [-s]
 
 DESCRIPTION
 ===========
     reloads network **interfaces(5)** file **/etc/network/interfaces**
     or config file defined in ifupdown2.conf file.
->>>>>>> cumulus/dev
 
     Runs **ifdown** on interfaces that were removed from the file and
     subsequently runs **ifup** on all interfaces.
@@ -64,15 +56,12 @@ OPTIONS
     -X EXCLUDEPATS, --exclude EXCLUDEPATS
                           Exclude interfaces from the list of interfaces to
                           operate on. Can be specified multiple times
-<<<<<<< HEAD
-=======
                           If the excluded interface has dependent interfaces,
                           (e.g. a bridge or a bond with multiple enslaved interfaces)
                           then each dependent interface must be specified in order
                           to be excluded.
 
     -s, --syntax-check    Only run the interfaces file parser
->>>>>>> cumulus/dev
 
 
 EXAMPLES

man.rst/ifup.8.rst

@@ -22,11 +22,7 @@ SYNOPSIS
 ========
 
     ifup [-h] [-a] [-v] [-d] [--allow CLASS] [--with-depends]
-<<<<<<< HEAD
-       **[-X EXCLUDEPATS] [-f] [-n] [--print-dependency {list,dot}]**
-=======
        **[-X EXCLUDEPATS] [-f] [-n] [-s] [--print-dependency {list,dot}]**
->>>>>>> cumulus/dev
        **[IFACE [IFACE ...]]**
 
     ifdown [-h] [-a] [-v] [-d] [--allow CLASS] [--with-depends]
@@ -37,22 +33,13 @@ DESCRIPTION
 ===========
     **ifup** and **ifdown** commands can be used to configure (or, respectively,
     deconfigure) network interfaces based on interface definitions in the
-<<<<<<< HEAD
-    file **/etc/network/interfaces/** file.
-=======
     config file ifupdown2.conf (defaults to **/etc/network/interfaces/** file).
->>>>>>> cumulus/dev
 
     **ifquery(8)** maybe used in conjunction with **ifup** and **ifdown**
     commands to query and validate applied/running configuration.
 
-<<<<<<< HEAD
-    **ifup** always works on the current **interfaces(5)** file under
-    **/etc/network/interfaces**. **ifdown** works on the last applied interface
-=======
     **ifup** always works on the current **interfaces(5)** file defined in ifupdown2.conf
     (default **/etc/network/interfaces**). **ifdown** works on the last applied interface
->>>>>>> cumulus/dev
     configuration.
 
     **ifup** on an already ifup'ed interface will re-apply the configuration,
@@ -95,12 +82,6 @@ OPTIONS
     -X EXCLUDEPATS, --exclude EXCLUDEPATS
                           Exclude interfaces from the list of interfaces to
                           operate on. Can be specified multiple times
-<<<<<<< HEAD
-
-    -i INTERFACESFILE, --interfaces INTERFACESFILE
-                          Use interfaces file instead of default
-                          /etc/network/interfaces
-=======
                           If the excluded interface has dependent interfaces,
                           (e.g. a bridge or a bond with multiple enslaved interfaces)
                           then each dependent interface must be specified in order
@@ -112,7 +93,6 @@ OPTIONS
 			  Also in ifupdown2.conf, users are not allowed to specify their own
 			  interfaces file unless disable_cli_interfacesfile is set to 0
 			  (default is 1).
->>>>>>> cumulus/dev
 
     -t {native,json}, --interfaces-format {native,json}
                           interfaces file format
@@ -135,11 +115,8 @@ OPTIONS
                           your state file is corrupted or you want down to use
                           the latest from the interfaces file
 
-<<<<<<< HEAD
-=======
     -s, --syntax-check    Only run the interfaces file parser
 
->>>>>>> cumulus/dev
 EXAMPLES
 ========
     # bringing up all interfaces

man.rst/ifupdown-addons-interfaces.5.rst

@@ -58,21 +58,12 @@ EXAMPLES
 
         **required**: False
 
-<<<<<<< HEAD
         **default**: off
 
         **validvals**: on,off
 
         **example**:
             link-autoneg on
-=======
-        **default**: no
-
-        **validvals**: yes,no
-
-        **example**:
-            link-autoneg yes
->>>>>>> cumulus/dev
 
 
       **link-speed**
@@ -191,19 +182,10 @@ EXAMPLES
 
         **required**: False
 
-<<<<<<< HEAD
         **default**: 0
 
         **example**:
             bridge-mcquerier 0
-=======
-        **default**: no
-
-        **validvals**: yes,no
-
-        **example**:
-            bridge-mcquerier no
->>>>>>> cumulus/dev
 
 
       **bridge-mclmc**
@@ -239,19 +221,10 @@ EXAMPLES
 
         **required**: False
 
-<<<<<<< HEAD
         **default**: 1
 
         **example**:
             bridge-mcrouter 1
-=======
-        **default**: yes
-
-        **validvals**: yes,no
-
-        **example**:
-            bridge-mcrouter yes
->>>>>>> cumulus/dev
 
 
       **bridge-stp**
@@ -348,11 +321,8 @@ EXAMPLES
 
             bridge-ports glob swp1-3.100
 
-<<<<<<< HEAD
-=======
             bridge-ports glob swp[1-3]s[0-4].100
 
->>>>>>> cumulus/dev
             bridge-ports regex (swp[1|2|3].100)
 
 
@@ -363,19 +333,10 @@ EXAMPLES
 
         **required**: False
 
-<<<<<<< HEAD
         **default**: 0
 
         **example**:
             bridge-mcqifaddr 0
-=======
-        **default**: no
-
-        **validvals**: yes,no
-
-        **example**:
-            bridge-mcqifaddr no
->>>>>>> cumulus/dev
 
 
       **bridge-waitport**
@@ -480,19 +441,10 @@ EXAMPLES
 
         **required**: False
 
-<<<<<<< HEAD
         **default**: 1
 
         **example**:
             bridge-mcsnoop 1
-=======
-        **default**: yes
-
-        **validvals**: yes,no
-
-        **example**:
-            bridge-mcsnoop yes
->>>>>>> cumulus/dev
 
 
       **bridge-access**
@@ -1016,11 +968,7 @@ EXAMPLES
 
 
 
-<<<<<<< HEAD
-    **ifenslave**: bond configuration module
-=======
     **bond**: bond configuration module
->>>>>>> cumulus/dev
 
 
       **bond-use-carrier**
@@ -1030,21 +978,12 @@ EXAMPLES
 
         **required**: False
 
-<<<<<<< HEAD
         **default**: 1
 
         **validvals**: 0,1
 
         **example**:
             bond-use-carrier 1
-=======
-        **default**: yes
-
-        **validvals**: yes,no
-
-        **example**:
-            bond-use-carrier yes
->>>>>>> cumulus/dev
 
 
       **bond-lacp-bypass-period**
@@ -1138,21 +1077,27 @@ EXAMPLES
 
         **required**: False
 
-<<<<<<< HEAD
         **default**: 0
 
         **validvals**: 0,1
 
         **example**:
             bond-lacp-bypass-allow 0
-=======
-        **default**: no
 
-        **validvals**: yes,no
+
+      **bond-lacp-bypass-allow-all-active**
+
+        **help**: allow all slaves to be active in lacp bypass irrespective of priority
+
+
+        **required**: False
+
+        **default**: 0
+
+        **validvals**: 0,1
 
         **example**:
-            bond-lacp-bypass-allow no
->>>>>>> cumulus/dev
+            bond-lacp-bypass-all-active 1
 
 
       **bond-mode**
@@ -1378,28 +1323,15 @@ EXAMPLES
 
       **vxlan-learning**
 
-<<<<<<< HEAD
         **help**: vxlan learning on/off
-=======
-        **help**: vxlan learning yes/no
->>>>>>> cumulus/dev
 
 
         **required**: False
 
-<<<<<<< HEAD
         **default**: on
 
         **example**:
             vxlan-learning off
-=======
-        **default**: yes
-
-        **validvals**: yes,no
-
-        **example**:
-            vxlan-learning no
->>>>>>> cumulus/dev
 
 
       **vxlan-id**

man.rst/interfaces.5.rst

@@ -14,14 +14,9 @@ network interface configuration for ifupdown
 
 DESCRIPTION
 ===========
-<<<<<<< HEAD
-    **/etc/network/interfaces** contains network interface configuration
-    information for the **ifup(8)**, **ifdown(8)** and **ifquery(8)** commands.
-=======
     By default, ifupdown2.conf sets **/etc/network/interfaces** as the
     network interface configuration file.  This file contains information
     for the **ifup(8)**, **ifdown(8)** and **ifquery(8)** commands.
->>>>>>> cumulus/dev
 
     This is where you configure how your system is connected to the network.
 
@@ -151,11 +146,7 @@ EXAMPLES
 
 FILES
 =====
-<<<<<<< HEAD
-    /etc/network/interfaces
-=======
     configuration file defined in ifupdown2.conf (default /etc/network/interfaces)
->>>>>>> cumulus/dev
 
 SEE ALSO
 ========