mirror of
https://github.com/CumulusNetworks/ifupdown2.git
synced 2024-05-06 15:54:50 +00:00
7496605db3
Ticket: CM-7128 Reviewed By: Trivial Testing Done: unit tested on Ken's machine The ifupdown2 ethtool addon module fails to set/check the link-speed on bridge ports. I removed excessive ifaceLinkKind checking since CM-6619 (03642a9a) added BRIDGE_PORT and BOND_SLAVE. This is ok since we now check to see if ports have defaults (only swp do) before showing or changing settings).
244 lines
10 KiB
Python
244 lines
10 KiB
Python
#!/usr/bin/python
|
|
#
|
|
# Copyright 2014 Cumulus Networks, Inc. All rights reserved.
|
|
# Author: Roopa Prabhu, roopa@cumulusnetworks.com
|
|
#
|
|
import json
|
|
import ifupdown.policymanager as policymanager
|
|
|
|
try:
|
|
from ipaddr import IPNetwork
|
|
from sets import Set
|
|
from ifupdown.iface import *
|
|
from ifupdownaddons.utilsbase import *
|
|
from ifupdownaddons.modulebase import moduleBase
|
|
from ifupdownaddons.iproute2 import iproute2
|
|
except ImportError, e:
|
|
raise ImportError (str(e) + "- required module not found")
|
|
|
|
class ethtool(moduleBase,utilsBase):
|
|
""" ifupdown2 addon module to configure ethtool attributes """
|
|
|
|
_modinfo = {'mhelp' : 'ethtool configuration module for interfaces',
|
|
'attrs': {
|
|
'link-speed' :
|
|
{'help' : 'set link speed',
|
|
'example' : ['link-speed 1000'],
|
|
'default' : 'varies by platform and port'},
|
|
'link-duplex' :
|
|
{'help': 'set link duplex',
|
|
'example' : ['link-duplex full'],
|
|
'validvals' : ['half', 'full'],
|
|
'default' : 'full'},
|
|
'link-autoneg' :
|
|
{'help': 'set autonegotiation',
|
|
'example' : ['link-autoneg on'],
|
|
'validvals' : ['on', 'off'],
|
|
'default' : 'varies by platform and port'}}}
|
|
|
|
def __init__(self, *args, **kargs):
|
|
moduleBase.__init__(self, *args, **kargs)
|
|
self.ipcmd = None
|
|
|
|
def _post_up(self, ifaceobj, operation='post_up'):
|
|
"""
|
|
_post_up and _pre_down will reset the layer 2 attributes to default policy
|
|
settings.
|
|
"""
|
|
if not self.ipcmd.link_exists(ifaceobj.name):
|
|
return
|
|
cmd = ''
|
|
for attr in ['speed', 'duplex', 'autoneg']:
|
|
# attribute existed before but we must reset to default
|
|
config_val = ifaceobj.get_attr_value_first('link-%s'%attr)
|
|
default_val = policymanager.policymanager_api.get_iface_default(
|
|
module_name='ethtool',
|
|
ifname=ifaceobj.name,
|
|
attr='link-%s'%attr)
|
|
|
|
if not default_val and not config_val:
|
|
# there is no point in checking the running config
|
|
# if we have no default and the user did not have settings
|
|
continue
|
|
# check running values
|
|
running_val = self.get_running_attr(attr, ifaceobj)
|
|
if config_val and config_val == running_val:
|
|
# running value is what is configured, do nothing
|
|
continue
|
|
if not config_val and default_val and default_val == running_val:
|
|
# nothing configured but the default is running
|
|
continue
|
|
# if we got this far, we need to change it
|
|
if config_val and (config_val != running_val):
|
|
# if the configured value is not set, set it
|
|
cmd += ' %s %s' % (attr, config_val)
|
|
elif default_val and (default_val != running_val):
|
|
# or if it has a default not equal to running value, set it
|
|
cmd += ' %s %s' % (attr, default_val)
|
|
else:
|
|
# no value set nor default, leave it alone
|
|
pass
|
|
if cmd:
|
|
try:
|
|
# we should only be calling ethtool if there
|
|
# is a speed set or we can find a default speed
|
|
# because we should only be calling ethtool on swp ports
|
|
cmd = 'ethtool -s %s %s' %(ifaceobj.name, cmd)
|
|
self.exec_command(cmd)
|
|
except Exception, e:
|
|
ifaceobj.status = ifaceStatus.ERROR
|
|
self.log_warn('%s: %s' %(ifaceobj.name, str(e)))
|
|
else:
|
|
pass
|
|
|
|
def _pre_down(self, ifaceobj):
|
|
pass #self._post_up(ifaceobj,operation="_pre_down")
|
|
|
|
def _query_check(self, ifaceobj, ifaceobjcurr):
|
|
"""
|
|
_query_check() needs to compare the configured (or running)
|
|
attribute with the running attribute.
|
|
|
|
If there is nothing configured, we compare the default attribute with
|
|
the running attribute and FAIL if they are different.
|
|
This is because a reboot will lose their running attribute
|
|
(the default will get set).
|
|
"""
|
|
for attr in ['speed', 'duplex', 'autoneg']:
|
|
default = policymanager.policymanager_api.get_iface_default(
|
|
module_name='ethtool',
|
|
ifname=ifaceobj.name,
|
|
attr='link-%s'%attr)
|
|
# if we have no default, do not bother checking
|
|
# this avoids ethtool calls on virtual interfaces
|
|
if not default:
|
|
continue
|
|
# autoneg comes from ethtool whereas speed and duplex from /sys/class
|
|
running_attr = self.get_running_attr(attr, ifaceobj)
|
|
|
|
configured = ifaceobj.get_attr_value_first('link-%s'%attr)
|
|
# there is a case where there is no running config or
|
|
# (there is no default and it is not configured).
|
|
# In this case, we do nothing (e.g. eth0 has only a
|
|
# default duplex, lo has nothing)
|
|
if (not running_attr or (not configured and not default)):
|
|
continue
|
|
|
|
# we make sure we can get a running value first
|
|
if (running_attr and configured and running_attr == configured):
|
|
# PASS since running is what is configured
|
|
ifaceobjcurr.update_config_with_status('link-%s'%attr,
|
|
running_attr, 0)
|
|
elif (running_attr and configured and running_attr != configured):
|
|
# We show a FAIL since it is not the configured or default
|
|
ifaceobjcurr.update_config_with_status('link-%s'%attr,
|
|
running_attr, 1)
|
|
elif (running_attr and default and running_attr == default):
|
|
# PASS since running is default
|
|
ifaceobjcurr.update_config_with_status('link-%s'%attr,
|
|
running_attr, 0)
|
|
elif (default or configured):
|
|
# We show a FAIL since it is not the configured or default
|
|
ifaceobjcurr.update_config_with_status('link-%s'%attr,
|
|
running_attr, 1)
|
|
return
|
|
|
|
def get_autoneg(self,ethtool_output=None):
|
|
"""
|
|
get_autoneg simply calls the ethtool command and parses out
|
|
the autoneg value.
|
|
"""
|
|
ethtool_attrs = ethtool_output.split()
|
|
if ('Auto-negotiation:' in ethtool_attrs):
|
|
return(ethtool_attrs[ethtool_attrs.index('Auto-negotiation:')+1])
|
|
else:
|
|
return(None)
|
|
|
|
def get_running_attr(self,attr='',ifaceobj=None):
|
|
if not ifaceobj or not attr:
|
|
return
|
|
running_attr = None
|
|
try:
|
|
if attr == 'autoneg':
|
|
output=self.exec_commandl(['ethtool', ifaceobj.name])
|
|
running_attr = self.get_autoneg(ethtool_output=output)
|
|
else:
|
|
running_attr = self.read_file_oneline('/sys/class/net/%s/%s' % \
|
|
(ifaceobj.name, attr))
|
|
except:
|
|
# for nonexistent interfaces, we get an error (rc = 256 or 19200)
|
|
self.logger.debug('ethtool: problems calling ethtool or reading'
|
|
' /sys/class on iface %s for attr %s' % \
|
|
(ifaceobj.name,attr))
|
|
return running_attr
|
|
|
|
|
|
def _query_running(self, ifaceobj, ifaceobj_getfunc=None):
|
|
"""
|
|
_query_running looks at the speed and duplex from /sys/class
|
|
and retreives autoneg from ethtool. We do not report autoneg
|
|
if speed is not available because this usually means the link is
|
|
down and the autoneg value is not reliable when the link is down.
|
|
"""
|
|
# do not bother showing swp ifaces that are not up for the speed
|
|
# duplex and autoneg are not reliable.
|
|
if not self.ipcmd.is_link_up(ifaceobj.name):
|
|
return
|
|
for attr in ['speed', 'duplex', 'autoneg']:
|
|
default_val = policymanager.policymanager_api.get_iface_default(
|
|
module_name='ethtool',
|
|
ifname=ifaceobj.name,
|
|
attr='link-%s'%attr)
|
|
# do not continue if we have no defaults
|
|
# this avoids ethtool calls on virtual interfaces
|
|
if not default_val:
|
|
continue
|
|
running_attr = self.get_running_attr(attr, ifaceobj)
|
|
# if we can change it (have a default) then show it
|
|
# otherwise, customers will show the running and save it to startup
|
|
# which will result in errors (ethtool does not work on bonds, etc.)
|
|
if running_attr:
|
|
ifaceobj.update_config('link-%s'%attr, running_attr)
|
|
|
|
return
|
|
|
|
_run_ops = {'pre-down' : _pre_down,
|
|
'post-up' : _post_up,
|
|
'query-checkcurr' : _query_check,
|
|
'query-running' : _query_running }
|
|
|
|
def get_ops(self):
|
|
""" returns list of ops supported by this module """
|
|
return self._run_ops.keys()
|
|
|
|
def _init_command_handlers(self):
|
|
if not self.ipcmd:
|
|
self.ipcmd = iproute2(**self.get_flags())
|
|
|
|
def run(self, ifaceobj, operation, query_ifaceobj=None, **extra_args):
|
|
""" run ethtool configuration on the interface object passed as
|
|
argument
|
|
|
|
Args:
|
|
**ifaceobj** (object): iface object
|
|
|
|
**operation** (str): any of 'post-up', 'query-checkcurr',
|
|
'query-running'
|
|
Kwargs:
|
|
**query_ifaceobj** (object): query check ifaceobject. This is only
|
|
valid when op is 'query-checkcurr'. It is an object same as
|
|
ifaceobj, but contains running attribute values and its config
|
|
status. The modules can use it to return queried running state
|
|
of interfaces. status is success if the running state is same
|
|
as user required state in ifaceobj. error otherwise.
|
|
"""
|
|
op_handler = self._run_ops.get(operation)
|
|
if not op_handler:
|
|
return
|
|
self._init_command_handlers()
|
|
|
|
if operation == 'query-checkcurr':
|
|
op_handler(self, ifaceobj, query_ifaceobj)
|
|
else:
|
|
op_handler(self, ifaceobj)
|