checktheroads-hyperglass/docs/configuration/general.md

From hyperglass/hyperglass/configuration/config.toml:

primary_asn

Type	Default Value
String	"65000"

Your network's primary ASN. Number only, e.g. 65000, not AS65000.

debug

Type	Default Value
Boolean	False

Enables Flask debugging. May be used to enable other module debugs in the future.

google_analytics

Type	Default Value
String	None

Google Analytics ID number. For more information on how to set up Google Analytics, see here.

message_error

Type	Default Value
String	"{input} is invalid."

Message presented to the user when invalid input is detected. {input} will be formatted as the input received from the main search field. For each command, input is validated via regular expression in the following patterns:

Command	Pattern
BGP Route	Valid IPv4 or IPv6 Address
BGP Community	Valid new-format, 32 bit, or large community
BGP AS Path	Any pattern
Ping	Valid IPv4 or IPv6 Address
Traceroute	Valid IPv4 or IPv6 Address

!!! note The BGP AS Path command currently allows (.*) to be submitted to the end device. Obviously, the device itself will return an error for garbage input, but ideally this would be "locked down" further. If you have an idea for a regex pattern to validate an AS_PATH regex, please submit a PR.

message_blacklist

Type	Default Value
String	"{input} is not allowed."

Message presented to the user when an IPv4 or IPv6 address matches the blacklist.toml array. {input} will be formatted as the input received from the main search field. For information on how this works, please see the blacklist documentation.

message_rate_limit_query

Type	Default Value
String	"Query limit of {rate_limit_query} per minute reached. Please wait one minute and try again."

Message presented to the user when the query limit is reached. {rate_limit_query} will be formatted as the rate_limit_query parameter. For information on how this works, please see the rate limiting documentation.

enable_bgp_route

Type	Default Value
Boolean	True

Enables or disables the BGP Route query type.

enable_bgp_community

Type	Default Value
Boolean	True

Enables or disables the BGP Community query type.

enable_bgp_aspath

Type	Default Value
Boolean	True

Enables or disables the BGP AS Path query type.

enable_ping

Type	Default Value
Boolean	True

Enables or disables the Ping query type.

enable_traceroute

Type	Default Value
Boolean	True

Enables or disables the Traceroute query type.

rate_limit_query

Type	Default Value
String	"5"

Sets the number of queries per minute allowed by remote_address of the request. For information on how this works, please see the rate limiting documentation.

rate_limit_site

Type	Default Value
String	"120"

Sets the number of site loads per minute allowed by remote_address of the request. For information on how this works, please see the rate limiting documentation.

cache_timeout

Type	Default Value
Integer	120

Sets the number of seconds to cache the back-end response. For information on how this works, please see the caching documentation.

cache_directory

Type	Default Value
String	"hyperglass/hyperglass/.flask_cache"

Sets the directory where the back-end responses are cached. For information on how this works, please see the caching documentation.