move RADLAN mibs to mib root

git-svn-id: http://www.observium.org/svn/observer/trunk@1570 61d68cd4-352d-0410-923a-c4978735b2b8

mibs/radlan/draft-ietf-entmib-sensor-mib.mib

@@ -1,439 +0,0 @@
-ENTITY-SENSOR-MIB DEFINITIONS ::= BEGIN
-
--- draft-ietf-entmib-sensor-mib-02.txt
-
-IMPORTS
-        rlEnv   FROM RADLAN-MIB
-        MODULE-IDENTITY, OBJECT-TYPE,
-        Integer32, Unsigned32, mib-2
-                FROM SNMPv2-SMI
-        MODULE-COMPLIANCE, OBJECT-GROUP
-                FROM SNMPv2-CONF
-        TEXTUAL-CONVENTION, TimeStamp
-                FROM SNMPv2-TC
-        entPhysicalIndex, entityPhysicalGroup
-                FROM ENTITY-MIB
-        SnmpAdminString
-                FROM SNMP-FRAMEWORK-MIB;
-
-entitySensorMIB MODULE-IDENTITY
-    LAST-UPDATED    "200210160000Z"
-    ORGANIZATION    "IETF Entity MIB Working Group"
-    CONTACT-INFO
-            "        Andy Bierman
-                     Cisco Systems, Inc.
-                Tel: +1 408-527-3711
-             E-mail: abierman@cisco.com
-             Postal: 170 West Tasman Drive
-                     San Jose, CA USA 95134
-
-                     Dan Romascanu
-                     Avaya Communication
-                Tel: +972-3-645-8414
-              Email: dromasca@avaya.com
-             Postal: Atidim technology Park, Bldg. #3
-                     Tel Aviv, Israel, 61131
-
-                     K.C. Norseth
-                     L-3 Communications
-                Tel: +1 801-594-2809
-              Email: kenyon.c.norseth@L-3com.com
-             Postal: 640 N. 2200 West.
-                     Salt Lake City, Utah 84116-0850
-
-             Send comments to <entmib@ietf.org>
-             Mailing list subscription info:
-               http://www.ietf.org/mailman/listinfo/entmib "
-    DESCRIPTION
-            "This module defines Entity MIB extensions for physical
-            sensors."
-    REVISION        "200210160000Z"
-    DESCRIPTION
-            "Initial version of the Entity Sensor MIB module, published
-            as RFC xxxx." -- RFC Editor assigns xxxx
---  ::= { mib-2 xxx } ## IANA needs to assign xxx
-    ::= { rlEnv 2 }
-
-entitySensorObjects              OBJECT IDENTIFIER
-     ::= { entitySensorMIB 1 }
--- entitySensorNotifications        OBJECT IDENTIFIER
---     ::= { entitySensorMIB 2 }
-entitySensorConformance          OBJECT IDENTIFIER
-     ::= { entitySensorMIB 3 }
-
---
--- Textual Conventions
---
-
-EntitySensorDataType ::= TEXTUAL-CONVENTION
-    STATUS       current
-    DESCRIPTION
-            "An object using this data type represents the Entity Sensor
-            measurement data type associated with a physical sensor
-            value. The actual data units are determined by examining an
-            object of this type together with the associated
-            EntitySensorDataScale object.
-
-            An object of this type SHOULD be defined together with
-            objects of type EntitySensorDataScale and
-            EntitySensorPrecision.  Together, associated objects of
-            these three types are used to identify the semantics of an
-            object of type EntitySensorValue.
-
-            Valid values are:
-
-               other(1):        a measure other than those listed below
-               unknown(2):      unknown measurement, or arbitrary,
-                                relative numbers
-               voltsAC(3):      electric potential
-               voltsDC(4):      electric potential
-               amperes(5):      electric current
-               watts(6):        power
-               hertz(7):        frequency
-               celsius(8):      temperature
-               percentRH(9):    percent relative humidity
-               rpm(10):         shaft revolutions per minute
-               cmm(11),:        cubic meters per minute (airflow)
-               truthvalue(12):  value takes { true(1), false(2) }
-
-            "
-    SYNTAX INTEGER {
-        other(1),
-        unknown(2),
-        voltsAC(3),
-        voltsDC(4),
-        amperes(5),
-        watts(6),
-        hertz(7),
-        celsius(8),
-        percentRH(9),
-        rpm(10),
-        cmm(11),
-        truthvalue(12)
-    }
-
-EntitySensorDataScale ::= TEXTUAL-CONVENTION
-    STATUS       current
-    DESCRIPTION
-            "An object using this data type represents a data scaling
-            factor, represented with an International System of Units
-            (SI) prefix.  The actual data units are determined by
-            examining an object of this type together with the
-            associated EntitySensorDataType object.
-
-            An object of this type SHOULD be defined together with
-            objects of type EntitySensorDataType and
-            EntitySensorPrecision.  Together, associated objects of
-            these three types are used to identify the semantics of an
-            object of type EntitySensorValue."
-    REFERENCE
-            "TBD"
-    SYNTAX INTEGER {
-        yocto(1),   -- 10^-24
-        zepto(2),   -- 10^-21
-        atto(3),    -- 10^-18
-        femto(4),   -- 10^-15
-        pico(5),    -- 10^-12
-        nano(6),    -- 10^-9
-        micro(7),   -- 10^-6
-        milli(8),   -- 10^-3
-        units(9),   -- 10^0
-        kilo(10),   -- 10^3
-        mega(11),   -- 10^6
-        giga(12),   -- 10^9
-        tera(13),   -- 10^12
-        exa(14),    -- 10^15
-        peta(15),   -- 10^18
-        zetta(16),  -- 10^21
-        yotta(17)   -- 10^24
-    }
-
-EntitySensorPrecision ::= TEXTUAL-CONVENTION
-    STATUS       current
-    DESCRIPTION
-            "An object using this data type represents a sensor
-            precision range.
-
-            An object of this type SHOULD be defined together with
-            objects of type EntitySensorDataType and
-            EntitySensorDataScale.  Together, associated objects of
-            these three types are used to identify the semantics of an
-            object of type EntitySensorValue.
-
-            If an object of this type contains a value in the range 1 to
-            9, it represents the number of decimal places in the
-            fractional part of an associated EntitySensorValue fixed-
-            point number.
-
-            If an object of this type contains a value in the range -8
-            to -1, it represents the number of accurate digits in the
-            associated EntitySensorValue fixed-point number.
-
-            The value zero indicates the associated EntitySensorValue
-            object is not a fixed-point number.
-
-            Agent implementors must choose a value for the associated
-            EntitySensorPrecision object so that the precision and
-            accuracy of the associated EntitySensorValue object is
-            correctly indicated.
-
-            For example, a physical entity representing a temperature
-            sensor that can measure 0 degrees to 100 degrees C in 0.1
-            degree increments, +/- 0.05 degrees, would have an
-            EntitySensorPrecision value of '1', an EntitySensorDataScale
-            value of 'units(9)', and an EntitySensorValue ranging from
-            '0' to '1000'.  The EntitySensorValue would be interpreted
-            as 'degrees C * 10'."
-    SYNTAX Integer32 (-8..9)
-
-EntitySensorValue ::= TEXTUAL-CONVENTION
-    STATUS       current
-    DESCRIPTION
-            "An object using this data type represents an Entity Sensor
-            value.
-            An object of this type SHOULD be defined together with
-            objects of type EntitySensorDataType, EntitySensorDataScale
-            and EntitySensorPrecision.  Together, associated objects of
-            those three types are used to identify the semantics of an
-            object of this data type.
-
-            The semantics of an object using this data type are
-            determined by the value of the associated
-            EntitySensorDataType object.
-
-            If the associated EntitySensorDataType object is equal to
-            'voltsAC(3)', 'voltsDC(4)', 'amperes(5)', 'watts(6),
-            'hertz(7)', 'celsius(8)', or 'cmm(11)', then an object of
-            this type MUST contain a fixed point number ranging from
-            -999,999,999 to +999,999,999.  The value -1000000000
-            indicates an underflow error. The value +1000000000
-            indicates an overflow error.  The EntitySensorPrecision
-            indicates how many fractional digits are represented in the
-            associated EntitySensorValue object.
-
-            If the associated EntitySensorDataType object is equal to
-            'percentRH(9)', then an object of this type MUST contain a
-            number ranging from 0 to 100.
-
-            If the associated EntitySensorDataType object is equal to
-            'rpm(10)', then an object of this type MUST contain a number
-            ranging from -999,999,999 to +999,999,999.
-
-            If the associated EntitySensorDataType object is equal to
-            'truthvalue(12)', then an object of this type MUST contain
-            either the value 'true(1)' or the value 'false(2)'.
-
-            If the associated EntitySensorDataType object is equal to
-            'other(1)' or unknown(2)', then an object of this type MUST
-            contain a number ranging from -1000000000 to 1000000000."
-    SYNTAX Integer32 (-1000000000..1000000000)
-
-EntitySensorStatus ::= TEXTUAL-CONVENTION
-    STATUS       current
-    DESCRIPTION
-            "An object using this data type represents the operational
-            status of a physical sensor.
-
-            The value 'ok(1)' indicates that the agent can obtain the
-            sensor value.
-
-            The value 'unavailable(2)' indicates that the agent
-            presently cannot obtain the sensor value.
-
-            The value 'nonoperational(3)' indicates that the agent
-            believes the sensor is broken.  The sensor could have a hard
-            failure (disconnected wire), or a soft failure such as out-
-            of-range, jittery, or wildly fluctuating readings."
-    SYNTAX INTEGER {
-        ok(1),
-        unavailable(2),
-        nonoperational(3)
-    }
-
---
--- Entity Sensor Table
---
-
-entPhySensorTable OBJECT-TYPE
-    SYNTAX        SEQUENCE OF EntPhySensorEntry
-    MAX-ACCESS    not-accessible
-    STATUS        current
-    DESCRIPTION
-            "This table contains one row per physical sensor represented
-            by an associated row in the entPhysicalTable."
-    ::= { entitySensorObjects 1 }
-
-entPhySensorEntry OBJECT-TYPE
-    SYNTAX        EntPhySensorEntry
-    MAX-ACCESS    not-accessible
-    STATUS        current
-    DESCRIPTION
-            "Information about a particular physical sensor.
-
-            An entry in this table describes the present reading of a
-            sensor, the measurement units and scale, and sensor
-            operational status.
-
-            Entries are created in this table by the agent.  An entry
-            for each physical sensor SHOULD be created at the same time
-            as the associated entPhysicalEntry.  An entry SHOULD be
-            destroyed if the associated entPhysicalEntry is destroyed."
-    INDEX  { entPhysicalIndex }    -- SPARSE-AUGMENTS
-    ::= { entPhySensorTable 1 }
-
-EntPhySensorEntry ::= SEQUENCE {
-        entPhySensorType            EntitySensorDataType,
-        entPhySensorScale           EntitySensorDataScale,
-        entPhySensorPrecision       EntitySensorPrecision,
-        entPhySensorValue           EntitySensorValue,
-        entPhySensorOperStatus      EntitySensorStatus,
-        entPhySensorUnitsDisplay    SnmpAdminString,
-        entPhySensorValueTimeStamp  TimeStamp,
-        entPhySensorValueUpdateRate Unsigned32
-}
-
-entPhySensorType OBJECT-TYPE
-    SYNTAX        EntitySensorDataType
-    MAX-ACCESS    read-only
-    STATUS        current
-    DESCRIPTION
-            "The type of data returned by the associated
-            entPhySensorValue object.
-
-            This object SHOULD be set by the agent during entry
-            creation, and the value SHOULD NOT change during operation."
-    ::= { entPhySensorEntry 1 }
-
-entPhySensorScale OBJECT-TYPE
-    SYNTAX        EntitySensorDataScale
-    MAX-ACCESS    read-only
-    STATUS        current
-    DESCRIPTION
-            "The exponent to apply to values returned by the associated
-            entPhySensorValue object.
-
-            This object SHOULD be set by the agent during entry
-            creation, and the value SHOULD NOT change during operation."
-    ::= { entPhySensorEntry 2 }
-
-entPhySensorPrecision OBJECT-TYPE
-    SYNTAX        EntitySensorPrecision
-    MAX-ACCESS    read-only
-    STATUS        current
-    DESCRIPTION
-            "The number of decimal places of precision in fixed-point
-            sensor values returned by the associated entPhySensorValue
-            object.
-
-            This object SHOULD be set to '0' when the associated
-            entPhySensorType value is not a fixed-point type: e.g.,
-            'percentRH(9)', 'rpm(10)', 'cmm(11)', or 'truthvalue(12)'.
-
-            This object SHOULD be set by the agent during entry
-            creation, and the value SHOULD NOT change during operation."
-    ::= { entPhySensorEntry 3 }
-
-entPhySensorValue OBJECT-TYPE
-    SYNTAX        EntitySensorValue
-    MAX-ACCESS    read-only
-    STATUS        current
-    DESCRIPTION
-            "The most recent measurement obtained by the agent for this
-            sensor.
-
-            To correctly interpret the value of this object, the
-            associated entPhySensorType, entPhySensorScale, and
-            entPhySensorPrecision objects must also be examined."
-    ::= { entPhySensorEntry 4 }
-
-entPhySensorOperStatus OBJECT-TYPE
-    SYNTAX        EntitySensorStatus
-    MAX-ACCESS    read-only
-    STATUS        current
-    DESCRIPTION
-            "The operational status of the sensor."
-    ::= { entPhySensorEntry 5 }
-
-entPhySensorUnitsDisplay OBJECT-TYPE
-    SYNTAX      SnmpAdminString
-    MAX-ACCESS  read-only
-    STATUS      current
-    DESCRIPTION
-            "A textual description of the data units that should be used
-            in the display of entPhySensorValue."
-    ::= { entPhySensorEntry 6 }
-
-entPhySensorValueTimeStamp OBJECT-TYPE
-    SYNTAX        TimeStamp
-    MAX-ACCESS    read-only
-    STATUS        current
-    DESCRIPTION
-            "The value of sysUpTime at the time the status and/or value
-            of this sensor was last obtained by the agent."
-    ::= { entPhySensorEntry 7 }
-
-entPhySensorValueUpdateRate  OBJECT-TYPE
-    SYNTAX        Unsigned32
-    UNITS         "milliseconds"
-    MAX-ACCESS    read-only
-    STATUS        current
-    DESCRIPTION
-            "An indication of the frequency that the agent updates the
-            associated entPhySensorValue object, representing in
-            milliseconds.
-
-            The value zero indicates:
-
-                - the sensor value is updated on demand (e.g.,
-                  when polled by the agent for a get-request),
-                - the sensor value is updated when the sensor
-                  value changes (event-driven),
-                - the agent does not know the update rate.
-
-            "
-    ::= { entPhySensorEntry 8 }
-
---
--- Conformance Section
---
-
-entitySensorCompliances OBJECT IDENTIFIER
-    ::= { entitySensorConformance 1 }
-entitySensorGroups      OBJECT IDENTIFIER
-    ::= { entitySensorConformance 2 }
-
-entitySensorCompliance MODULE-COMPLIANCE
-    STATUS  current
-    DESCRIPTION
-            "Describes the requirements for conformance to the Entity
-            Sensor MIB module."
-    MODULE  -- this module
-        MANDATORY-GROUPS { entitySensorValueGroup }
-
-    MODULE ENTITY-MIB
-        MANDATORY-GROUPS { entityPhysicalGroup }
-
-    ::= { entitySensorCompliances 1 }
-
--- Object Groups
-
-entitySensorValueGroup OBJECT-GROUP
-    OBJECTS {
-             entPhySensorType,
-             entPhySensorScale,
-             entPhySensorPrecision,
-             entPhySensorValue,
-             entPhySensorOperStatus,
-             entPhySensorUnitsDisplay,
-             entPhySensorValueTimeStamp,
-             entPhySensorValueUpdateRate
-    }
-    STATUS  current
-    DESCRIPTION
-            "A collection of objects representing physical entity sensor
-            information."
-    ::= { entitySensorGroups 1 }
-
-END
-
-