* Add support for Nokia 1830 PSS Optical gear
Tested against 1830 PSS-8 Chassis, in single and multi-chassis configurations
Supports Optical Power, temperature, current, power, and a variety of card states, alarms, and trail status.
Of note: With multi-chassis nodes, reading values from the non-master can be a "slow" process, slow in that the default timeout Libre ships with can cause the SNMP client to begin issuing retries. This can result in the chassis daemon rate limiting and/or blocking the client. The solution here is to raise the SNMP timeout within each device's configuration; unfortunately those values are not configurable on a per-OS basis (at least not at this time).
* Removing Unused / Duplicate MIBs
* modifications needed for update of VALERE-DC-POWER-MIB with new file ELTEK-BC2000-DC-POWER-MIB
* add test results for BC2000 post update
* updated test file data
* re-upload of updated files
* reverted valere.json to defaults and recreated with proper varient .json
* replace vpwrShelfIndex with vpwrBayIndex
* updated test data
* Update test data
* try again valere_bc2000.json
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Added support for Cambium cnMatrix switches
* Fixed styling issues
* Fixed styling issues
* Fixed duplicate, incorrectly labeled LLDP-EXT-DOT3-MIB and LLDP-EXT-DOT1-MIB
* Corrected MIB with the same name but with different OIDs configured: LLDP-EXT-MED/-CAMBIUM/-MIB
* Removed my added duplicate MIBs
* Removed unused MIBs
* Added support for Nutanix VM count, disk state, CPU usage and RAM usage
* Added num_oid values required for pull request
* Fixes for Nutanix AOS graphs
* Create F5-COMMON-SMI-MIB
* Create F5-PLATFORM-STATS-MIB
* Create f5os.yaml
* Create f5os.yaml
* Create f5os_f5os.snmprec
* Create f5os_f5os.json
* Remove remaining test line
* Add mandatory num_oid
* Add num_oid for fanspeed
* Force use of index for fanspeed
* Force index for temperature + add snmp_flags to make it work
* Update test data
* Update test data
* Add support for OpenManage Modular devices.
* Update dell-ome-m.yaml
Remove commented out dmmGlobalSystemStatus num_oid
Change Max/Min Power to Peak/Min Usage
* json test file for open manage modular support
* Update dell-ome-m_dell-ome-m.json
* Update dell-ome-m_dell-ome-m.snmprec
* Update dell-ome-m_dell-ome-m.json
* Update dell-ome-m_dell-ome-m.snmprec
* Update dell-ome-m_dell-ome-m.json
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Squash Commit
Fortigate Mib updates and ipsc ipv6 tunnels stat
test data to go allong with it
* add optional -Ih flag
* lint fix
* revert changeed on test data 500d
* fix test data on 60f3g4g
* Add PK-SOFTWARE-APPLIANCE-V2 MIB
* Add support for PrimeKey Software Appliance
* Move file to correct path
* Make the OS detection more specific
* Thanks vscode
* Sync filename with osname
* Not supported
* Track SQL database size as volume
* Two fixes
* Add support for Trellix NSP devices
- Add discovery for mlos NSP devices
- Monitor port statistics from non standard MIBs
- Add Trellix MIBs
- Add test data
* Fix StyleCI findings
* Rename MIB files to match MIB names, remove unused MIBs
* regenerate mlos-nsp_ns9500.json to account for changes from PR#14963
* Add support for Trellix ATD devices
- Add discovery for mlos ATD devices
- Monitor various OIDs related to ATD system health and status
- Add required MIBs
- Add test data
* add json test data
* Rename MCAFEE-SMI to MCAFEE-INTRUVERT-SMI
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Add Modified V-sol MIB
* Add Vsolution Discovery OS
* Add Vsolution Discovery OS
* Add os-logo
* Add snmp test data
* Add .json test data
* Add .json actual test data
* Adds API call to update port notes on devices.
* Adds Cisco IETF-DHCP Server MIB and Trap Handlers.
* Updates local permissions changed.
* Linting cleanup.
* Moves test to a single file. Updates the args to match the status.
* Fixes tests failing for Cisco DHCP server SNMP traps.
* adding new os: vutlan
* renaming mib file, moving mib file to vendor folder, removing commented code
* Cache version data (#14404)
* Cache version data
Calling cli commands can be expensive, cache the results.
* style fixes
* Fix pre-laravel usage
* fix lint
* Revert "Cache version data (#14404)"
This reverts commit e426a9299d.
* fixing descr for door state and removing comments
* adding tests and moving vutlan definition file
* adding num_oid value for tests
* Rename VUTLAN-SYSTEM-MIB.mib to VUTLAN-SYSTEM-MIB
* Update vutlan_vt825.json
* updating test data
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Add discovery support for Riedo Networks UPDU
* Add full test data
* Use correct filename for MIB
* Extract hardware, serial and firmware version
* Make pattern more consistent
* Fix incomplete test data
* Added support for Ubiquiti UFiber OLT
* Fixed php files with port detection
* Added missing MIB file
* Fixed test data
* Fixed php script to detect ports compatible with php 8.1
* Fix styleci
* Enforcement of new control styleci
* Apply fixes from StyleCI
* Port detection override
* Changed all "Entry" to "Table".
Co-authored-by: StyleCI Bot <bot@styleci.io>
* Started UHP VSAT support
* continue uhp
* end of day
* uhp support
* fixed icon / logo
* cleanup
* added test data
* Delete Uhp.php
If the file is empty let's delete it
* added test data
* Update uhp.yaml
spacing fix
* Fixed identation
* New test data
* Fixed
* styling
* fix
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* BATS support
* Removed disabled discovery modules
* Style change, more test data, removed unused rows
* Style correction LibreNMS/OS/Bats.php
* Removed old reference
* Another style correction add LibreNMS/OS/Bats.php
* Changed location info and temperature
* Style, again
* Style, again
* New testdata needed
* Fix wrong state color in discovery/bats.yaml
* New test data
* Update bats_bats.json
* Saved the test data in a different way
* More test data
* Manually changed test data
* New test data
* New test data
* Update bats_bats.json
* Saved the test data in a different way
* More test data
* Manually changed test data
* New test data
* New test data
* Delete bats_bats.snmprec
* Update bats.json
* Update bats.json
Co-authored-by: Maikel de Boer <mdb@tampnet.com>
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Updated MIB verrsion, added trap mib and cpu usage
* Reverted back to old commit and fixed CPU
* removec cpu reading since it broke the detection
* Restore line return
Co-authored-by: sander Blomvågnes <sander@adaptic.no>
Co-authored-by: Tony Murray <murraytony@gmail.com>
