* Menu and title use displayname
* Fix empty strings
* Fix array creation
* Use groupby instead of loop
* Change one forgotten var
* Revert to working simple changes
* Change test data to include displayname
* Fix bad copy paste in test data
* Add support for Nokia 1830 PSS Optical gear
Tested against 1830 PSS-8 Chassis, in single and multi-chassis configurations
Supports Optical Power, temperature, current, power, and a variety of card states, alarms, and trail status.
Of note: With multi-chassis nodes, reading values from the non-master can be a "slow" process, slow in that the default timeout Libre ships with can cause the SNMP client to begin issuing retries. This can result in the chassis daemon rate limiting and/or blocking the client. The solution here is to raise the SNMP timeout within each device's configuration; unfortunately those values are not configurable on a per-OS basis (at least not at this time).
* Removing Unused / Duplicate MIBs
* SnmpQuery runtime cache
Optionally cache the SnmpResponse from queries for the rest of the runtime.
It would be nice to have cache hits for these to help prevent wasting memory caching data that is only used once.
Key data must match: device, context, options, oids
* Apply fixes from StyleCI
* Add command to the cache key
* Caching in the wrong spot, cache individual commands...
* Apply fixes from StyleCI
---------
Co-authored-by: StyleCI Bot <bot@styleci.io>
* IP::fromHexString handle ascii
Some bad MIBs convert the hex to ascii on display.
Attempt to decode that if the situation is detected.
fixes#15501
* add ascii tests
* Ports min polled period of 1
Prevent divide by 0
Use Mac utility
* fix bad snmprec for airos-af-ltu
* Update a large amount of invalid mac addresses
either the script is capturing them wrong or users are mangling them
* More updated test data
* Update test data with bad input
* Fix ones using encoded <private> and attempt to fix capture
* Update awplus data
* restore missing data
* update other DNOS
* Fix ones using encoded <private> and attempt to fix capture
* Fix ones using encoded <private> and attempt to fix capture
* fix typo
* Update some data
* update data
* update ruijie
* modifications needed for update of VALERE-DC-POWER-MIB with new file ELTEK-BC2000-DC-POWER-MIB
* add test results for BC2000 post update
* updated test file data
* re-upload of updated files
* reverted valere.json to defaults and recreated with proper varient .json
* replace vpwrShelfIndex with vpwrBayIndex
* updated test data
* Update test data
* try again valere_bc2000.json
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Ports module fix nulls not updating
* Fix broken test data
I'd like to see how it came out broken in the first place, but I don't have access
* Update json data
* Fix fortivoice snmprec
* Fix scs-ks
* Fix bad siteboss550 data
* Refactor MAC utils to a new utility class
* Apply fixes from StyleCI
* Inline functions
Add tests
Handle bridgeid format
* Apply fixes from StyleCI
* Dedicated code path for stp bridge parsing, and improve STP output a bit
* Correctly parse dot1dBaseBridgeAddress and don't store int in bool field
* trim any unexpected character from bridge addresses, add extra test data.
* better comment
* barsBridge can handle dot1dBaseBridgeAddress correctly now
* parseBridge, check for properly formatted mac first.
* update test data, empty data = empty mac
* Fix new usage after rebase
* import
---------
Co-authored-by: StyleCI Bot <bot@styleci.io>
* Vmware vminfo
Remove legacy file and migrate to OS discovery
* tighter
* ios_stp-vlans working correctly now
* Make vmwVmGuestOS nullable
* Discover os info too
* VM Info module
* Apply fixes from StyleCI
* Fix log severity
* Fix log severity (more)
* VM Info module
* Poll with ESXi too because it is lightweight
add test data
* poller data now too
---------
Co-authored-by: StyleCI Bot <bot@styleci.io>
* Remove snmp functions that are barely used
Replace them with SnmpQuery calls
* Apply fixes from StyleCI
* Fix missing namespace
* Import Oid
* No more variables left may be repeated multiple times at the end with snmpsim, remove them all
* update data fixed by SnmpResponse bugfix
---------
Co-authored-by: StyleCI Bot <bot@styleci.io>
* Added grouping on the Voltage displays
Added groupings to better show which voltage and current variables that belongs together.
* Update enexus.json
* Update enexus_eltek-smartpack2-syst.json
* Update enexus_enexus.json
* Update enexus_smartpacks.json
* Update enexus_smartpacks2.json
* Update enexus_sp2touch.json
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Added support for Cambium cnMatrix switches
* Fixed styling issues
* Fixed styling issues
* Fixed duplicate, incorrectly labeled LLDP-EXT-DOT3-MIB and LLDP-EXT-DOT1-MIB
* Corrected MIB with the same name but with different OIDs configured: LLDP-EXT-MED/-CAMBIUM/-MIB
* Removed my added duplicate MIBs
* Removed unused MIBs
* Adding oid upsAdvOutputActivePower
Adding oid upsAdvOutputActivePower under the power section as this value is in watts.
* Create apc_smx750.json
Adding test JSON data for APC changes
* Create apc_smx750.snmprec
Adding snmpsim test data for APC changes
* Update apc_smx750.json
* Update apc_smx750.snmprec
* Update apc_smx750.json
* RouterOS: use mtxrGaugeTable instead of mtxrHealthGroup
Should now exactly match System > Health
Historical data will be lost
* fix yaml
* Fix numeric oid
* Update test data, add table to crs317
* Add groups and cleanup yaml
* revert state_name as it is used in the rrd file name
* Except the gauge table state sensor
* Group Health -> System
* update json
* update json
* add the softdeletes migrations for applications
* add working migration file
* add deleted_at to db schema.yaml for applications
* update includes/html/forms/application-update.inc.php to work with softdeletes
* update includes/html/pages/device/edit/apps.inc.php for softdelete
* update includes/discovery/applications.inc.php to work with softdelete
* minor updates to application-update.inc.php for disabling
* style cleanup
* set discovered when running discovery
* update application tests to include deleted_at
* add deleted_at to a missed test
* a few more tweaks for opensips
* add a missing deleted_at for linux_suricata_extract-v1
* fix fillable for Application model
* massive cleanup of the application update widget thingy
* improve the code for discovery and using Laravel
* add a missing line to app/Models/Application
* add a missing include to app/Models/Application.php
* record includes for Application model
* remove apps from the applications table when a device is deleted
* revert to using upcert and where for discovery to fix CI
* make discovered fillable and set it when running discovery... convert back to firstOrNew
* clean up application discovery a bit and use observer
* style fix
* spelling fix... disablaed -> disabled
* rever removal to just use where
* cleanup app removal on delete
* add restored to ModuleModelObserver
* delete -> forcedelete fix
* apply the suggested changes
* use murrants other suggestion
* style fix
* Added support for Nutanix VM count, disk state, CPU usage and RAM usage
* Added num_oid values required for pull request
* Fixes for Nutanix AOS graphs
* Install bouncer
* Seeder and level migration
* Display and edit roles
* remove unused deluser page
* Update Radius and SSO to assign roles
* update AlertUtil direct level check to use roles instead
* rewrite ircbot auth handling
* Remove legacy auth getUserlist and getUserlevel methods, add getRoles
Set roles in LegacyUserProvider
* Small cleanups
* centralize role sync code
show roles on user preferences page
* VueSelect component WIP and a little docs
* WIP
* SelectControllers id and text fields.
* LibrenmsSelect component extracted from SettingSelectDynamic
* Handle multiple selections
* allow type coercion
* full width settings
* final style adjustments
* Final compiled assets update
* Style fixes
* Fix SSO tests
* Lint cleanups
* small style fix
* don't use json yet
* Update baseline for usptream package issues
* Change schema, not 100% sure it is correct
not sure why xor doesn't work
* Create F5-COMMON-SMI-MIB
* Create F5-PLATFORM-STATS-MIB
* Create f5os.yaml
* Create f5os.yaml
* Create f5os_f5os.snmprec
* Create f5os_f5os.json
* Remove remaining test line
* Add mandatory num_oid
* Add num_oid for fanspeed
* Force use of index for fanspeed
* Force index for temperature + add snmp_flags to make it work
* Update test data
* Update test data
* Fix error when missing poller data
* Apparently impossible to detect regex without error, so require regex always. Update docs.
* Apparently this adva code is garbage :D
* Missing count sensor type
* Processor handle missing input
* Handle missing ifName a little better
* Yep, ports module is a dumpster fire. Attempt to clean up some.
* apparently os yaml trying to replace on non-existent fields
* Might as well define all sensor type units
* revert previous fix, real issue was vlans module does not have polling.
* APC last input failure & display outlet name
* SNMP data & test files
* fix total energy divisor
* fix ap8853
* fix ap8959eu3
* test fixes
* Adjust sensor descr new format #{outletid} : {outletlabel}
* Add support for OpenManage Modular devices.
* Update dell-ome-m.yaml
Remove commented out dmmGlobalSystemStatus num_oid
Change Max/Min Power to Peak/Min Usage
* json test file for open manage modular support
* Update dell-ome-m_dell-ome-m.json
* Update dell-ome-m_dell-ome-m.snmprec
* Update dell-ome-m_dell-ome-m.json
* Update dell-ome-m_dell-ome-m.snmprec
* Update dell-ome-m_dell-ome-m.json
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Force cast on some values before doing arithmetic
Some devices (like Delta InsightPower G3 Mini SNMP Card) return STRING instead of numerical value.
A few lines after, when doing a division on it, everything go bad ( / $divisor).
I added force casting, no more crash and the values are OK.
* Using helper cast_number() instead of intval()
* Fix style
* Add test data
* Stop using deprecated function cast_number
* rework into a json app and support the old style
* working now
* add health checking
* add some datapoints to make writing alerts easy
* add a few missing item for has checks
* rework the app page
* use the right var for id9
* print the self test log if we have it
* add a graph for the max temp
* display the max temp graph
* display the health pass in the disk list if we have the data
* fix legacy handling and set app as ok
* replace id190 and id194 with the more useful maxtemp graph on the apps page
* don't print the additional info area for legacy extends
* add id232
* add id252 graph support
* properly display id232 now
* do not display SSD graphs for non-SSD disks
* for legacy extends, make sure we don't have a bad line
* add missing label for Product value
* fix metrics
* rework the metrics stuff a bit more
* typo fix
* more smart metrics cleanup
* add exit info to metrics
* style cleanup and logic checking for when disks are all now fine
* fix checking for no more health errors
* update the docs for SMART for v1 and remove slightly pointless notes about useSN
* update the docs
* initial test stuff
* add missing tests for the legacy code
* save if it it is legacy or not
* style cleanup
* update the smart legacy test
* style cleanup
* more test tweaking
* some more style cleanup
* more test fixes
* correct the disk ID for the legacy test da0 -> Z304VCFY
* more tests update
* more test cleanup
* begin cleanup of the v1 tests
* more v1 test updates
* more tests for v1
* more test cleanup
* fix exit_nonzero and add unhealthy metric
* add smart alerts
* add the metric unhealthy to the stat test
* use app data for the smart-common.inc.php
* Squash Commit
Fortigate Mib updates and ipsc ipv6 tunnels stat
test data to go allong with it
* add optional -Ih flag
* lint fix
* revert changeed on test data 500d
* fix test data on 60f3g4g
* add poller for mojo cape submit
* mojo_cape_submit poller now works
* add app page for mojo_cape_submit
* add basic generic stat graphs for mojo cape submit
* general size stats graph for mojo_cape_submit
* make sure we update slugs that did not see anything submitted for them
* sort the slugs by sub count
* add app protos graph and sub top 12 graphs
* add mojo cape submit docs
* add tests for mojo_cape_submit
* add mojo_cape_submit to the apps page
* add string helper for mojo_cape_submit
* poke lots of stuff with php-cs-fixer
* remove a unneeded line
* add a missing metric and app data to test
* add logsize poller
* add set size info
* add more stats
* add min size
* more logsize files
* add logsize
* fix creating log file links
* add two new graphs
* add some graphs
* add no_minus_d
* add no minus d to app page
* add count of log files
* save logsizes in app data
* rename title log sizes
* only show top 12
* add mean median and mode
* cleanup naming a bit
* the values for the files hash is now a int instead of another hash
* add new stats and correct median name
* now properly handle unseen
* fix logsize bits
* add combined
* update metrics and add some tests
* add logsize graphs to apps page
* add the logsize bit
* add logszie docs
* add some example alert rules
* style cleanup
* more style cleanup
* fix a few things for metrics and update the test
* fix a variable name in the test and update the data
