* New OS: QTECH
https://www.qtech.ru/en/catalog/
* QTECH: Add hardware, version and serial support
* QTECH: Fix platform and software version detection
* QTECH: Add test for QSW-3450
It's also possible to do zpool IO from the MIB, but diskIO on
LibreNMS makes a lot of assumptions about it coming from the UCD
MIB.
This changeset adds detection for FreeNAS and TrueNAS - despite
having their own enterprise number, the snmpd uses the FreeBSD
one.
The naming is a bit all over the place, because this reflects
reality - IXSystems produce FreeNAS and TrueNAS, the product lines
have merged to eliminate FreeNAS, but TrueNAS still calls itself
FreeNAS everywhere except the GUI.
* OS detection and sensors for Dell Compellent
... or Dell storage as it is now known. Under the hood it's
referred to as Compellent, so I've named it as that to avoid
confusion.
It is not part of the Dell group or using the Dell MIB folder -
Dell have doubled up on some OID definitions, which means the MIB
here and a couple of the existing ones conflict.
The change adds OS detection and a frankly ludicrous amount of
sensors. I have access to a relatively low end device, so at the
moment everything under *ctlr* is my best guess based on the other
table layouts.
* Set sensor state_name to avoid collisions
* Regenerate test data
* Fix routing engine discovery on standalone JunOS devices
In #9426, the sensor discover code was replaced with YAML.
Unfortunately it treats the FRU table as standalone OIDs, and did not
implement the filtering that was present in the original code.
This change causes LibreNMS to fully walk the FRU table, which allows us
to silence alerting on devices with an 'unknown' status. Without this
change, standalone devices have a spurious routing engine with state 1,
which triggers false harware failure alerts.
As we're changing the name of the sensors, this causes a loss of sensor
history.
This has been brought up on community a couple of times:
https://community.librenms.org/t/juniper-qfx-routing-engine-state-alert/6152https://community.librenms.org/t/spurious-failed-routing-engine-from-some-junos-devices/6208
* Update test data
* Update test data
* Update test data
* Update test data
* This syntax works, but fails linting
* Add Advantech logo.
Taken from https://commons.wikimedia.org/wiki/File:Advantech_logo.svg
with minor edits (removed width and height).
* Add Advantech MIB files.
* Add Advantech definitions.
* Add suppor for version and hardware polling.
* Add advantech snmp recording.
* Add sensors for SFP ports
Each SFP will have temperature, voltage, tx bias, Tx/Rx power.
Also update snmp recording to include new data.
* Rename ADVANTECH-EKI-PRONEER-MIB_1_01.mib to ADVANTECH-EKI-PRONEER-MIB
* Rename advantech-common-mib.mib to ADVANTECH-COMMON-MIB
* Update advantech.yaml
* Update advantech.svg
* Create advantech.json
Co-authored-by: PipoCanaja <[email protected]>
* Added support for ICT Modular Power System and ICT Sine Wave Inverter
* Added SNMP test data for ICT Modular Power System and ICT Sine Wave Inverter
* Fixed styling errors and refactored state sensor for ICT Sine Wave Inverter
* Fixed newly created styling issues from refactoring ICT Sine Wave Inverter files.
* Fixed further styling errors from previous changed to appease Travis CI
* Removed unnecessary math from ICT Sine Wave Inverter voltage sensor
* Cleaned up unnecessary lines in ict-mps/ict-swi sensors. Moved from snmp_get to snmp_get_multi in ict-mps/ict-swi os pollers.
* Added test data for ICT MPS and SWI
* Fixed issue with load sensor not discovering
* Update snmpget to snmp_get
Co-Authored-By: Jellyfrog <[email protected]>
* Updated test data post-fixing sensor detection issue on ICT Sine Wave Inverters
* Moved ict-swi and ict-mps from legacy to yaml sensors
* Removed legacy code for ict-mps and ict-swi sensors
* Last commit mistakenly removed OS polling from ict-mps and ict-swi
* Fixed formatting for OS polling and updated test data for ict-mps and ict-swi
Co-authored-by: Jellyfrog <[email protected]>
* Added rittal-cmc (LCP Plus)
skip_values opperand 'not_in_array' returns an error in pre-commit but in principal it's running. Can someone help?
1) LibreNMS\Tests\YamlTest::testDiscoveryDefinitionSchema
rittal-cmc.yaml does not validate. Violations:
[modules.sensors.fanspeed.data[0].skip_values[0].value] Array value found, but an integer or a string is required
[modules.sensors.temperature.data[0].skip_values[0].value] Array value found, but an integer or a string is required
[modules.sensors.temperature.data[1].skip_values[0].value] Array value found, but an integer or a string is required
[modules.sensors.temperature.data[2].skip_values[0].value] Array value found, but an integer or a string is required
[modules.sensors.temperature.data[3].skip_values[0].value] Array value found, but an integer or a string is required
* fix Scrutinizer Inspection
* fix codeclimate
* fix typo
* Update discovery_schema.json
To allow arrays in comparisons
* Control structures
* fix the pre-fix issues
* Typo in copy/paste
* Update rittal-cmc.json
* Unit1,2,3,4 and new snmprec, json have not changed
* Update rittal-cmc.json
Correct JSON data
* typo copy paste
Co-authored-by: PipoCanaja <[email protected]>
* Added WUT 57606,57613,57720
* Added os wut-*
* fixed MIB Names and try to generalize wut
* more general sysObjectID mapping, and mib directory
* Delete WUT-57606-MIB
* Delete WUT-57613-MIB
* Delete WUT-57720-MIB
* Rename wut-57613.snmprec to wut_57613.snmprec
* Rename wut-57720.snmprec to wut_57720.snmprec
* Rename wut-57606.snmprec to wut_57606.snmprec
* Delete wut-57606.yaml
* Delete wut-57720.yaml
* Delete wut-57613.yaml
* Delete wut-57606.yaml
* Delete wut-57720.yaml
* Delete wut-57613.yaml
* Update wut.yaml
* Try to correct the Temperature part
This should work for temperature, according to MIB. Pressure and Humidity are not described in this mibfile, so we cannot poll them.
* change wut.yaml
* Add and fix wut_57720
* after ./scripts/save-test-data.php ?
* Add test data
Co-authored-by: PipoCanaja <[email protected]>
* Migrate ironware sensor discovery from php to yaml.
* More sensors, add grouping.
* dynamic_discovery_get_value() becomes getValueFromData()
* Target a specific index with skip_values.
* Improve Brocade BGP session discovery/polling
This commit allows for the correct discovery of BGP sessions
with 32-bit ASNs, IPv6 neighbors using the BGP4V2-MIB which is
based on draft-ietf-idr-bgp4-mibv2-11 and also polls for IPv4
unicast received routes through the FOUNDRY-SN-BGP4-GROUP-MIB.
Copied most of the code from PR#8877 by @Mikeburke14, cleaned
up the code a little bit to match the normal LibreNMS style,
and fixed bgpPeers_cbgp discovery as well as polling for the
ipv4.unicast neighbors.
Note that older Brocade IronWare firmware versions are known
to have multiple defects relating to the BGP4V2-MIB which
might result in certain missing non-established neighbors.
Related vendor defect numbers:
- DEFECT000633962
-- Symptom: The OID bgp4V2PeerAdminStatus does not return the
correct value
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00g
- DEFECT000583319
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display all the BGP entries
-- Reported: NI 05.6.00
-- Resolved: NI 05.8.00e
- DEFECT000550309
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display the full information
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00c
* Add ironware CER & ICX platform test data.
* Re-add ironware.json compatible with current master branch.
* Update nios.yaml
I tried to pull them all in using {{ index }}, but it didn't actually work.....
This adds the DHCP, DNS and NTP service statuses.
* Dynamic service discovery
* typo
* Create nios_status.snmprec
* Create nios_status.json
* Array
* Typo, more
Co-authored-by: PipoCanaja <[email protected]>
* extend FS switches support
* MIB compilation
* HW and Ver
* sensors and CPU
* tests
* correct version
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to replace "down" with "not up" :)
* fix other ifOperStatus checks
* - update yzyxel mibs
- update definitions für ies series
- slot state and alarm support via yaml
* more sensors
* add new device Zyxel IES4206
* restore original ies files
* revert function stuff
* update to latest official mib
* rebase
* added support for drac power and current polling
* Revert "added support for drac power and current polling"
This reverts commit cf83c1cb82.
* changed discovery to yaml
* readded test data
* Added model, processor, fan and power supply for Alcatel Omnistack Switches
* Removed Index from description of Fan and power supply
* Merged PR #10655
* Added Temperature Sensor for AOS7+ Alcatel Enterprise Switches
* Added AOS7 mempools
* Added Tests
* Update aos.yaml
* Update alerts levels in state sensors
* Add test data
* additional sensors, some cleanup in yaml
* re-add updated tests/data/enexus_smartpacks2.json
* some rework to avoid regression
* sensor grouping
* update test data
Alexander MoisseevandGitHub
Adam BishopandGitHub
WheelandGitHub
Martin22andGitHub
Martin22andGitHub
Kevin ZinkandGitHub
Martijn SchmidtandGitHub
JohnSPeachandPipoCanaja
Vitali KariandPipoCanaja
David BuschandPipoCanaja
hartredandPipoCanaja
Tobias HeisterandTony Murray
ErikandTony Murray
joseUPVandTony Murray
Martin ZatloukalandTony Murray
