* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* Codeclimate
* Initialisation + comments
* Like this
* Cisco Sat Receiver
* Formatting Fixes
* Code Climate Fixes
* Add $entry field in the last array.
* Formatting Fixes
* Updated to correct S/N was grabbing wrong OID.
* Update test data for missing serial #
* Updated Serial # test data
* Fixes for SZ detection
* Ruckuswireless devices
* remove registered mibs
* Code Climate Fixes
* updated test data for zd1100 & zd1200
* Updated database test data
* trying to fix smartzone test data
* updating zd test data
* more code climate fixes
* Update ruckuswireless-unleashed.yaml
* hide total clients if 1 ssid
* fixing smartzone ap status
* smartzone ap count fixes
* fixes because of git
* fix zd ap counts
* Update ruckuswireless-sz.json
* Update ZD1200 test Data
* Update ruckuswireless-sz.snmprec
* Update Database test data
* Update zd1200 database data
* Update ruckuswireless_zd1100.snmprec
* Update ruckuswireless_zd1100.json
* Update ruckuswireless_zd1100.json
* Update ruckuswireless_zd1100.json
* Code Climate Fixes
* Code Climate Fixes
* Update Ruckuswireless.php
* Code Format Fixes
* add mibs,first commit
* adds support for Nokia ISAM Plattform
* remove some comments
* change os polling to multi oid
* Restore file headers
* Fix discovery by sysObjectID
* first deactivate checks against IHUB (timos), It not necessary so long we can not provide more thatn one snmp community per device
* move snmp state and temperature from pre-cache
* Update os_schema.json
* EDS support
* EDS support
* EDS support
* EDS support
* EDS support (tests)
* EDS support
* EDS support
* Adding DS18B20 sensors
* Adding DS18B20 sensors
* read tables separatly in precache instead
* update some mibs
* extend snmpwalk_cache_twopart_oid function
* add raisecom dbm and temperature sensors
* add test data
* add some more sensors
* Update raisecom.inc.php
* Update raisecom.inc.php
* device: support for Alcatel OmniPCX Server
* device: support for Alcatel OmniPCX Server - add test data
* rename
* Add a new versatile type of sensor, without unit - doc extension
* tests data updated for omnipcx
* new count test after funny rebase
* clean
* tests
* index in yaml file ...
* Update omnipcx.json
* try to add pbx state
* Change function snmpwalk_cache_oid to allow snmpvalue without index
* testdata
* Adapt the discovery_schema (to allow a non_indexed oid)
* Update snmp.inc.php
* Eltek Valere more sensors
* Fix runtime, temperature and format runtime
* remove "runtime" sensor
* Don't need the pre-cache
* Parenthesis
* match previous indentation
* Adding Sonicwall SMA 400 support
* Added metric clients for use in SSL VPN client alerting
* Support for specifying multiple sensors for clients metric
* RAM info supported
* CPU info supported
* Added test data
* Dashes in graph aren't really useful
* Updated test data with script from upstream (#10)
* Fix style errors (#11)
* Now 8 spaces on line 56
* port clients sensor to count
Some sensor cleanups (move all icon definitions to one spot)
* update port data
* add sensor test data. Make a guess at userLicense output since it is missing.
* cleanup missed items
* typo
* Updating test data
* Fixed missing CPU info
* Recreated test data
* Recreate test data after rebase
* Test data without ignore statements in config
* Fix some comment and documentation typos.
* Fix various entphysical page display issues.
- Resolve flickering during loading (missing liClosed for nested items).
- Clicking a sensor actually takes you to the matching graph now.
* Add a few nicecase() calls to clean up html page display.
* Create discover_entity_physical() function
- Add discover_entity_physical() function into includes/discovery/functions.inc.php
- This allows for an easy implementation of OS-specific entity-physical discovery.
- Update includes/discovery/entity-physical/entity-physical.inc.php to use the new function.
* Add power_consumed and power_factor sensors.
* Two new icons, make more entPhysical data visible.
* Pre-commit fix: blank line found at end of control structure.
* Add Schleifenbauer OS support.
* Now really fix the comment typo.
* Fix parsing mistakes.
* Add a generic count sensor.
* Make the Schleifenbauer discovery use count instead of state sensors.
* Don't place count sensor at the top, add sane limits for Schleifenbauer
* Finetuning the rrd_options, changing Schleifenbauer sensor names.
* Update schleifenbauer.svg
* optimize logo too
* add test data
* fix sensor value display (spaces break it)
* update entPhysicalIndex
* Merge ethernetprobe2 into akcp and improve akcp
Use higher resolution temperature values if available
Properly hand F/C temperature scales (LibreNMS always uses C)
Add current, voltage, airflow (no test data)
Move humidity to yaml
* Update akcp.snmprec
* Update akcp-serverprobe8.json
* Add group
* Update test data
remove old MIB
* add group to sensor initial discovery and use dynamic_discovery_get_value template syntax on them
* spaces
* switching to YamlDiscovery::replaceValues
* testdata from ibmc
* testdata from nxos
* testdata from omnitron-iconverter
* testdata from vrp
* adapt discovery_schema to accept variables
* remove pattern
* Update discovery_schema.json
Improves visual identification for sensors
- [x] Docs
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Fix Zynos temp warn limit
And others, but this seems to be the only one that uses
remove some odd limit restriction in the poller
* More consistent rounding for sensor limits
* round all numeric limits to 10 digits
* update test data
* Remove complex calculation as negative limit values are already swapped as needed.
* ZyXEL XGS4600-32F
- Added mib for diagnostics
- CPU/Mem
- Temp/Fan/Voltage
- Updated zyxel group mempools
- Updated test data
- snmprec
- json
- Altered ZyWall
- To exclude XGS switches
* Defined ZYXEL-HW-MONITOR-MIB at the top of file
* Removed .MIB
* Updated dlink support with additional health,mempools and processors
* Update dlink.inc.php
* Update dlink.inc.php
* Added test data
* add tests/data/dlink_dgs-1510-28.json
* actual data for the new items
hopefully doesn't break anything
Mostly issues with snmp oids and options containing spaces. Try to remove all of those.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Added Fortigate state sensors
* Added snmprec file
* Update fortigate.json
* Fix "awesome" ifHighSpeed implementation...
* Update fortigate.json
* better MAX_INT ifHighSpeed fix
* update for new ifType changes
* ifDescr is not used correctly like most fortinets
* Update to Added support for HeliOS 10Ghz failover to 5Ghz state sensor
Converted /includes/discovery/sensors/state/helios.inc.php to yaml
Test units included
CLA has been signed
* Added support for CeraOS TX Mute Status state sensor, NTP Client Lock Status state sensor.
Updated CeraOS temperature sensor, now called from includes/definitions/discovery/ceraos.yaml - removed includes/discovery/sensors/temperature/ceraos.inc.php
Corrected issue with CeraOS temperature reverting to zero after polling (added a trailing . to the num_oid)
Amended includes/definitions/discovery/helios.yaml with changes as advised by Neil Lathwood and Tony Murray
* Added unit test data and corrected ceraos.yaml validation error
* Added support for Ceraos Wireless Sensors (php)
Cross Polar Interference
Wireless Frequency
Added Ceraos state sensors (yaml)
NTP Client Lock Status
Tx Mute Status
Radio Operational Status
Remote Radio Operational Status
IDU Temperature
Power Amplifier Temperature
* Fix up tests, etc
* remove helios changes, fix style
* Create audiocodes family with very basic sensors
* audiocode polling php and test files
* audiocode polling php and test files
* audiocode test files
* audiocode cleaning
* tests with selective polling disabled
* Added support for SAF CFM L4 wireless device
* Added copyright statement according to LibreNMS documentation
* Added snmp test data and excluded some discover modules from os definition
* Style issue fixed
* More descriptive function
* MIB file rename
* Rename MIB file and change other files accordingly
* Added test data
* Removed debug statement
* Last checks
* Style changes
* Style changes
* Style changes
* Style changes
* Code restructure to make it more readable
* Fixed error in foreach
* Style issues
* Formatting of states within Yaml changed to make it more readable
* Omit default arguments
* Better code and modules only in CFM-M4P-MUX
* Chaged cfml4 to cfm
* Update Sensor.php
* Update Sensor.php
* Better handling of scientific numbers
* Better handling of scientific numbers
* New test data
* Correction on handling trailing zeros
* Different way of cleaning the numbers based on Tony's input
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
This has been running in two production networks for > 3 months without any issues.
Require it explicitly. Makes it easier to understand and matches the style of other values
Questionable YAML changes (either broken before or now broken):
secureplatform: haStatCode
ptp600: receiveModulationMode
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
Tested on MX and EX series, works fine.
Skip slots that are empty and pull all sensors in jnxFruTable, data from old code is preserved.
PipoCanajaandTony Murray
priiduonuandTony Murray
djamp42andTony Murray
Nick HilliardandTheGreatDoc
Vitali KariandTony Murray
jozefrebjakandTony Murray
KodApa85andTony Murray
Søren RosiakandTony Murray
ipptacandTheGreatDoc
Marvin KuurstraandTony Murray
Martijn SchmidtandTony Murray
Kal42andTony Murray
Nick PeelmanandNeil Lathwood
evherosandTony Murray
markoh76andTony Murray
Janno SchouwenburgandTony Murray
Anders LowingerandNeil Lathwood