* ADVA device support
- sensors for temperature, voltage, current and dbm
- ADVA mibs for FSP150CC and FSP3000R7
* sysObjectId - changed to level above instead of two entries
* OS for FSP150 and FSP3000R7 now in two seperate OS definitions
- split the files
- removed sysObjectId check for each
- removed hardcoded sensor limits
- removed more generic MIBs
* standardized variables / corrected declarations
* added missing MIB, style check code
* - corrected 'current' readings by adding $devisor
- changed rrdfile names to sensorname+$index
- moved LLDP-V2 mibs to main mib directory
* append Avaya VSP HW revision to serial number
The old way added the HW revision to the sysDescr. When managing a bunch of switches with different versions this made it look like you had a lot of different kinds of switches. These are all the switches. Just add it to the serial number so you can have the hw version for reference if needed. Just makes more sense not to appended to sysDescr.
* Update avaya-vsp.inc.php
* Update avaya-vsp.inc.php
forgot to add the $hardware variable so Platform would populate
* Update avaya-vsp.inc.php
* Add TiMOS temperature and power supply state sensors.
* Refactor the sensor discovery, making it a little cleaner
* Discover TiMOS device serial number
Pull proper hardware OID instead of parsing sysDescr
* Make the style gods happy
* Refactoring for some of the requested changes
* Break out the arrays into variables as scrutinizer requests...
* Fix missing semicolon
* Committer: Chris A. Evans <[email protected]>
Add basic support for MRV OptiDriver Optical Transport Platform
* OS Detection
* Sensors
* Chassis temperature
* State
* Tx/Rx Optical Interface Power
* Power Supply
* Fan
* renamed: includes/definitions/mrv-optidriver.yaml -> includes/definitions/mrv-od.yaml
new file: includes/discovery/sensors/dbm/mrv-od.inc.php
deleted: includes/discovery/sensors/dbm/mrv-optidriver.inc.php
renamed: includes/discovery/sensors/pre-cache/mrv-optidriver.inc.php -> includes/discovery/sensors/pre-cache/mrv-od.inc.php
renamed: includes/discovery/sensors/state/mrv-optidriver.inc.php -> includes/discovery/sensors/state/mrv-od.inc.php
new file: includes/discovery/sensors/temperature/mrv-od.inc.php
deleted: includes/discovery/sensors/temperature/mrv-optidriver.inc.php
renamed: includes/polling/os/mrv-optidriver.inc.php -> includes/polling/os/mrv-od.inc.php
* modified: includes/discovery/sensors/dbm/mrv-od.inc.php
Added missing ')' in the if conditionals.
* Requested changes
modified: includes/definitions/mrv-od.yaml
modified: includes/discovery/sensors/state/mrv-od.inc.php
modified: includes/discovery/sensors/temperature/mrv-od.inc.php
modified: includes/polling/os/mrv-od.inc.php
removed extensions from all new mib files
* Add snmprec file to satisfy test units
new file: tests/snmpsim/mrv-od.snmprec
* newdevice: HPE RT3000 UPS
* newdevice: HPE RT3000 UPS
* changed polling to snmp_get_multi_oid, fixed divisor for load and voltage
* fixed blank line in functions.inc.php
* newdevice: Added support for Terra sti410c
* newdevice: tests for Terra sti410c
* renamed sti410c to terra, added support for sti440 and recognition for sda410C, sta410C, saa410C, sdi410C, sai410C, ttd440, ttx410C, tdx410C, sdi480
* fixed terra.svg and access to sysDescr
* Added feature CPU and Memory monitoring on BDCom switchs
* Added feature CPU and Memory monitoring on BDCom switchs, plus pre-commit check
* Added mib files, and modification given by laf
* Replaced png logo with a svg version. Modification in the validation of processor discovery.
* Replaced png logo with a svg version. Modification in the validation of processor discovery + added files.
* Create asyncos.yaml
Added device definition for AsyncOS devices.
* Create asyncos.inc.php
Add poller definition for Async devices.
* Update asyncos.yaml
Added discovery modules.
* Update asyncos.inc.php
Refactored version, hardware, and serial parsers.
* Add AsyncOS MIBs
Add MIBs for AsyncOS WSA and ESA appliances.
* Added OS test
* AsyncOS Refactoring/OS Support
* Change serial number in unit OS test
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
* New Device Support for ICT DC Distribution Panels
* Fixed indexes, removed tests
* Supply name instead of oid to snmp_get call
* Fixed index conflict for current sensors
* Fix the definition. Should be mef instead of mef-evc
* Added Coriant TNMS Hardware page.
* Polling and discovery modules for TNMS Network Equipements.
* SQL in one line.
* Only show when OS is coriant
* Fix conflict file
* Conflict file
* Added missing COLLATE
* Refactor poller code for more data to be inserted into DB in the future.
Removed the discovery module and merged it into poller code.
* Removed tnms-nbi discovery also in the yaml
* Removing debug
* Code updates and fixes + schema rename
* bootstrapify the code.
Renamed the sql file
* Bloody tabs !
* Add db_schema.yaml update.
* Added device discoery for Teradici PCoIP card
* Removed redundant arguments from snmp_get and comments in os definition
* Added 'workstations' as a device type
* I agree to the conditions of the Contributor Agreement contained in doc/General/Contributing.md.
* Add support for Nokia SAS-Sx 7210
* Revert "I agree to the conditions of the Contributor Agreement contained in doc/General/Contributing.md."
This reverts commit 2b89f9edb5.
* Edited hardware regex to cover more sample data
* Added detection for Hirschmann Railswitch
* Update AUTHORS.md
I agree to the conditions of the Contributor Agreement contained in doc/General/Contributing.md.
* Fixes for PR 6207 requested changes
* Fixes for PR 6207 requested changes
* Fixes for PR 6207 requested changes
* Fix for PR 6207 requested changes
* Fix for PR 6207 requested changes
* Fix for PR 6207 requested changes (old states and temperatures directories removal)
* fix for PR 6207 : state fileupdated
