* split siteboss 530 and 550 into multiple OS
* add more sensors to siteboss550 and new Percent sensor
* fix contact closure event state values
* split os polling for siteboss to siteboss530 and siteboss550
* add test unit for siteboss550, rename test unit for siteboss to siteboss530
* refactor siteboss os polling to \Librenms\OS
* implement OSPolling to Sitebos550
* force save in pollOS() to keep custom sysName during polling
* updated unit test
* update device graphs
* remove pollOS and extra save()
* siteboss550 no longer extends OSPolling
* update siteboss550 test data
* update discoverOS() to match recent os discovery changes
* styleCI changes
* fix siteboss hardware discovery; add check to OS polling if os_group .inc file exists
* collapse siteboss to single OS, implement siteboss sensors in advanced discovery
* add siteboss unit tests
* removed unneeded OS disco defs
* styleCI changes
* more styleCI changes
* split siteboss os to siteboss530 and siteboss550
* split siteboss os to siteboss530 and siteboss550
* move php polling back into yaml
* keep original siteboss OS name
* resave snmp data for siteboss OS
* resave snmp data for siteboss550 OS
* initial support for DC-UPS-48 from algom
* add snmprec files for algcom-dc-ups
* rename MIB and create json test unit
* new MIB name, recapture test snmprec and json
* remove unnecessary OS matching
* - make Eaton Gigabit Network Card (AKA M2) a separate OS
(this hardware shares the sysOID with an older product, but not much more than that.)
- add relevant and updated mib-files. This creates duplicates of the same mibfile in mibs/.
unsure if this can be avoided
* axed some old mibs again
* put all Eaton mibs in the same subdir (common dependencies on EATON-OIDS, avoid file duplicates)
* update all mibs (for which a more recent version was found)
* update relevant YAML-files, so mib_dir points at eaton/.
* All os detection now uses Yaml
Move OS detection code into the Core module.
Defer all OS with snmp queries.
Add snmpwalk option.
Port ubnt and mobileiron to yaml.
* Silly ide refactor
* Ciena SAOS 8 device improvements
- improved interface polling for certain devices with broken ifXEntry and long ifEntry value caching
- added G.8032 virtual ring status sensors
- adjusted default alert threshold for a sensor because some devices provide a nonsensical value (more work to be done here)
* Style fixes
* missed whitespace
Co-authored-by: Tony Murray <murraytony@gmail.com>
* add freshtomato snmprec file
add freshtomato snmprec , generated from latest freshtomato release
* add freshtomato test data
add freshtomato test data, generated from latest freshtomato release
* add freshtomato os definition
add freshtomato os definition
* freshtomato discovery for version, hardware model
freshtomato discovery for version, hardware model
* update freshtomato.snmprec, extra oid
update freshtomato.snmprec, extra oid now showing since going to 1.68, from over night update.
LibreNMS can now show version and hardware (router model) correctly.
* update freshtomato.json, hardware is now populated
update freshtomato.json, hardware is now populated, since going to 1.68, definition discovery is working correctly it seems.
* Regenerate without lo ignored.
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Drop redundant sensors from eaton-mgeups. Prefer RFC1628-sensors. Keep stuff unique to the mge MIB.
Add snmprecs for two new variants.
* Rewrote these jsons files after the previous change. All tests passing.
* Mistake in ddmDiagnosisRXPower OID
Mistake in ddmDiagnosisRXPower OID (its same as ddmDiagnosisBias)
Right OID is .1.3.6.1.4.1.40418.7.100.30.1.1.17
* Update snr.json
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Added support for OS detection from NXOS and UCS
* Changed to SysObjectID instead of Hardware
* Move to YAML
* Rename test cases from nxos to ucos
* Update ucos_2.json
* Rename nxos.yaml to ucos.yaml
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Update sensatronics-em1.yaml
sysObjectID wasn't specific enough.
* Create sensatronics-ittm.yaml
Add support for 4/16 channel units
* Create sensatronics-ittm.yaml
Add support for 4/16 channel units
* Change name to be specific to ITTM
* Create sensatronics-ittm.snmprec
* Create sensatronics-ittm.json
* Add basic support for GE Galaxy Pulsar Plus Controllers
* Add basic support for GE Galaxy Pulsar Plus Controllers
* Add basic support for GE Galaxy Pulsar Plus Controllers
* Modified Gepulsar.php
* IFOTEC new product integration
* change source code indentation
* change source code for code climate checking
* change source code for code climate checking
* deletion of an unnecessary line
* add ifotec.php and test units
* forgetting about the previous commit
* modifications of test units
* add a test units
* optimization and add test units
* change SMNP mode request
* source code cleanup and and file for test units
* update .snmprec file
* update json test file
* update json test file
* IFOTEC mib integration
* add IFOTEC mib files
* IFOTEC mib integration for sensors
* cancel $oid2 unset
* delete useless line
yaml os discovery now respects the os mib_dir definition
mib_dir now only allows strings, not arrays
changed schema validation to account for that
consolidated dell mibs, no reason for them to be spread out
* Fixed Ubiquiti Airfiber LTU retrieval
* Fixed Rx/Tx modulation rate
* Fixed eth0 retrieval
* Fixed quality retrieval
* Fixed Tx/Rx rate
* Fixed distance retrieval
* Added Rx power chain0
* Added Rx power chain1
* Removed eth0 port status
* Removed duplicate Tx EIRP
* UBNT AF LTU: Remove the now useless eth0 port status sensor
eth0 is now logged by the port module, so we don't need a separate state sensor to log the status of the port.
This change was mentioned in the previous commit, but I forgot to include it...
* UBNT AF LTU: Updated test data
* UBNT AF LTU: Fix incorrect spaces
* UBNT AF LTU: Use getnext
* UBNT AF LTU: Add some type checks and fixes
* UBNT AF LTU: Passing sensor values to WirelessSensor calls
* UBNT AF LTU: Cast sensor value to int
* Revert changes made to the test data
* UBNT AF LTU: Add new test data
* UBNT AF LTU: Add discoverWirelessQuality function for quality discovery
* UBNT AF LTU: Use snmpwalk_cache_oid
* UBNT AF LTU: Remove blank line at start of control structure
* UBNT AF LTU: Fix RX Ideal Power Chain 1
* UBNT AF LTU: Fix distance sensor
* UBNT AF LTU: Update CPU usage OID
* UBNT AF LTU: Update test json
* UBNT AF LTU: Update test json 1.4.0
corsoblaster
Hayden
Jellyfrog
Guilherme Poletto
Tony Murray
Dag Bakke
Dan Baker
TheGreatDoc
FingerlessGloves
Kanok Chantrasmi
craig-nokia
Heath Barnhart
n-lyakhovoy
O Palivan
PipoCanaja
Magnus Larsen
kvedder-amplex
q7joey
Anthony Brandelli
crcro
ospfbgp
MARMONIER Cédric
Russell Morris
Jozef Rebjak
Adam Bishop
Najihel
Denny Friebe
Hans Erasmus
Wooboy