* Fix IPv6 in service check host (#13939)
* Add hostName cleaning to Clean
* Apply RFC 5952 formatting to Clean::hostName output
* Use more liberal cleaning for hostnames
* Remove unwanted whitespace
* Apply Clean::hostName() to all relevant fields
* Fix docstring
* Use IP::isValid inline
* Update Clean.php
* Update services.inc.php
Co-authored-by: Tony Murray <[email protected]>
* Fix avtech 12E environment sensor
Updated MIB for newer internal sensor object schema in 12E models.
Updated discovery yaml file to retrieve temperature and humidity
data from internal and digital sensors.
Added test data for roomalert12e model.
Co-authored-by: Sander Steffann <[email protected]>
Co-authored-by: Tony Murray <[email protected]>
* add poller
* add a generic alert graph
* add support for .total
* add the initial work on the suricata app page
* add applayer flow sources
* more rrd work and add more fields
* add a missing graph to the suricata page
* add suricata to the apps page
* all working now for suricata
* add some suricata alert examples
* all done with the php
* update the application docs for Suricata
* add another note about Suricata stats in the docs
* add the test file
* add the test JSON
* remove a unneeded newline from the appication docs
* correct the type uptime type
* packets graph should by packets/sec
* minor formatting cleanup
* one more minor formatting cleanup
* shot in the dark to see if something fixes the angry linter
* fix snmpsim file
* add metrics
* add values to the metrics
* add a missing comma to the json
* add a missing line to snmprec and cleanup json a bit
* a few more minor changes to see if this makes it happy... regened via scripts/json-app-tool.php
* see if this will make it happy
* add suricata to app discovery and hope that fixes it... take a shot in the dark as to why the linter errors strangely on two of the files
* fix json
* add a missing ] to the json
* rename two graphs so it does not trigger one alert and add a missing metric
* whoops, *_alertString is not a metric
* FS OAP OEO and EDFA mibs
* definitions and discovery yaml
* current dbm state temperature and voltage updates
* update on poller and discovery modules
* test data
* removing unneeded pollers and discovery modules as requested
* update to os test data
test data now reflects fs-nmu details instead of module details as module may not be present at previous oid or module may not be present at all in the device
* OS update and Test Date Updates
* channels numbers
* removal of default true poller and discovery modules
* reintroduced previous OEO module data
* StyleCI fixes
* Update fs-nmu.inc.php
* Update fs-nmu.inc.php
* Update fs-nmu.inc.php
* Update fs-nmu.inc.php
* Update fs-nmu.inc.php
Co-authored-by: Neil Lathwood <[email protected]>
* Add ISIS discovery and polling for iosxe devices
* remove ModuleModelObserver
* add php stan exclusions as they are already present for the base module
* change port_id to cached lookup
* Create model object instead of using arrays and set properties directly
* remove unneeded space...
* remove null from non nullable field
* revert to extending from ciscowlc rather than os
* remove OS module
* remove phpstan exclusions and fix errors
* add spacing...
* add spacing....
* add spacing
* again...
* Add tests
* Update Iosxe.php
* Update IsisAdjacency.php
* Create 2022_04_08_085504_isis_adjacencies_table_add_index.php
* Update db_schema.yaml
* Update iosxe_asr920.json
* Update Iosxe.php
* Update Iosxe.php
* Update junos_mx5t_isis.json
Co-authored-by: Tony Murray <[email protected]>
* Add support for PrimeKey Hardware Appliance
https://doc.primekey.com/ejbca-appliancehttps://doc.primekey.com/signserver-appliancehttps://doc.primekey.com/ejbca-appliance/operations/webconf-configurator-of-hardware-appliance/monitoring
* Correct off-by-one error for Galera states
* Add load multiplier
* Don't poll transaction ID, it's too messy
* Tabs -> spaces
* Don't modify system load. (Is this a %age or not?)
* CUP moves Load -> Count
* CPU moves Load -> Count
* Now I have MiBs. Attempts to use them are to date unsuccessful
* Removed numeric oids entirely
I'm not sure how easy it will be to conver this to YAML.
* Formatting
* More formatting
* Numeric it is
* Fix States
* Numeric oids
* Shorten Descriptions
* Add DB threshold
* Percent -> Yaml
* Temperature -> Yaml. Relaxed num_oid validation
* Fanspeed -> Yaml
* Volgate -> Yaml
* Count -> Yaml
* State -> Yaml
* Tweak snmp_flags
* minimize icon
* Check if first_word function is required
* Incorporate feedback
Co-authored-by: Tony Murray <[email protected]>
* Add DBm and State Sensors
Added extra MIB files
Added Dbm levels on ports
Added Stacking State Sensors
* Added include for zynos.inc.php
File patch - includes/discovery/ports/zynos.inc.php
* Create ZYXEL-STACKING-MIB
Official Zyxel MIB
* Create ZYXEL-TRANSCEIVER-MIB
Official Zyxel MIB
* Added test file zynos_xgs4600.json
* Create zynos snmprec test file
* CENSORED zynos_xgs4600.json
* Created new polling file for Zynos ports
Converts zynos SWP port style to be 1/1 style
* Created new discovery for Zynos ports
Changes zynos SWP ports to be 1/1 style during discovery
* Fixing ci complaints in discovery/ports/zynos.inc.php
* Fixing ci complaints in polling/ports/os/zynos.inc.php
* fixing more ci complaints in discovery
* Updated Zynos.snmprec
* Updated zynos.json
* Updated zynos.json
* Removed ifDescr pre-cache
* Removed pre-cache from zynos.yaml
* Reverted zynos.snmprec
* Restored zynos.json
* Updated zynos polling to use zeropad
* Updated zynos discovery to use zeropad
* Updated zynos.yaml
Updated zynos.yaml to include ifname: true to change port names and added '/^ZyXEL/' to sysDescr_regex
* Update zynos.inc.php
* Update zynos.inc.php
* Update zynos_xgs4600.json
* Update zynos_xgs4600.snmprec
* Re-Generated Zynos.json
* Fixed ifOperStatus in Zynos.json
* Delete zynos.inc.php
* Update ports.inc.php
* Added new test data
* Updated zyxel test data and discovery
* Update ports.inc.php
* Update zynos.snmprec
* Updated zynos.json
* Update Zynos.json
* Fix StyleCI issues
* Update zynos.json
* Update zynos.json
* Update zynos.json
* Updated zynos mgs3712.json
* Update zynos_mgs3712.json
* Added back old SFP discovery
-SFP Temperature
-SFP Voltage
* Fixeed Hardware and Versiondetection for US-8 and USW-Switches with Version 5
It seems that the same model and same firmware version respond with different SNMP-records, depending on Hardware revision. This should be more general
* removed "linux" from version string in some cases
Changed regex for better version isolation and updated test data
* Update edgeswitch.yaml
Corrected the edgeswitch Test-Version detection. It seems that there are 4 cases :(:
USW GigaBit Ethernet Switch, firmware 5.76.7.13442
US-8, 5.76.7.13442, Linux 3.6.5
USW-Flex 5.76.7.13442
EdgeSwitch 24-Port 250W, 1.0.1.4720839, Linux 3.6.5-f4a26ed5
* Removed false change. Changed 8XP test data
Removed false change. Changed 8XP test data
* ' -> "
' -> "
* Update vertiv-pdu.yaml
VERTIV-V5-MIB states UNITS "decivolts (rms)" for pduPhaseVoltage
* Update vertiv-pdu_mn03edr1.json
Updated test data
Co-authored-by: Neil Lathwood <[email protected]>
* Add EntityVoltage Sensors
* Add BoardPower Sensors
* Add Fanspeed Percent sensor
* Add Voltage_Status and Temperature_Status Normal|Minor|Major|Critical indicators, and internal Voltage and Temperature sensors
* set Minor alarm violations to warning status
* remove inconsistently applied empty lines between sections, and trailing newline that caused errors
* fetch thresholds for temperature.sensors and optical.RxPower from SNMP
* Added snmp testfiles for ne8000-m8 variant of VRP platform
* group sensors by card-identifier
* Regenerate testfiles for 5720-32x-ei
* Regenerate testfiles for the whole VRP family
* Optical Bias is reported as miliamps-mA, and not microamps-uA
* Implement divisor detection, VRP or NE8 prepended on sensor for debug-testing
* remove VRP or NE8 prependeds on sensors(put there for debug/testing only)
* use parent OIDs for walking and naming
* ignore per-slot power if unsupported
* regenerated snmp json testfiles
* sanitize bgp-peers value
* restore vrp.json test
Co-authored-by: PipoCanaja <[email protected]>
* Add initial support for Lenovo ThinkStation server
* Initial Support for Lenovo ThinkStation Server - detection rules
* Lenovo ThinkStation MMIB Files
* Added test data for Lenovo ThinkStation
Model SR250
* trying unit test fix
trying to correct unit test failures
* Revert "trying unit test fix"
This reverts commit 7f44689e8a.
* Create lenovoXClarityIMPI_lenovoxcc.snmprec
Added snmprec
* Update lenovoXClarityIMPI.yaml
Removed Null-Value (over) in yaml
* Update lenovoXClarityIMPI.yaml
Fixed typo
* Update lenovoXClarityIMPI.yaml
Fixed another typo in os yaml
* Update lenovoXClarityIMPI.yaml
Added {{ $index }} and removed skip_values
* Update lenovoXClarityIMPI.yaml
Added index in yaml
* Update lenovoXClarityIMPI.yaml
* Update lenovoXClarityIMPI_lenovoxcc.json
* Update lenovoXClarityIMPI_lenovoxcc.json
* Updated detection rule
Removed N/A skip, removed unecessary state_name.
Removed $index in oid, because otherwise the detection fails for some reason
Excluded num_oid because otherwise the poller fails to detect the values.
* Code improvements and test data
I've implemented what I've learned from my Fujitsu pull:
- added test data
- corrected MIB file names and folder
* Code improvements
Removed an empty array and two empty lines.
* Code improvements
* Delete LENOVO-SMI-MIB DEFINITIONS
This file is named wrong and we already have `LENOVO-SMI-MIB` so looks to be duplicated
* Changed OS name
Changed OS name
* Fixed test data for os name change
* Update LENOVO-PRODUCTS-MIB
Reupdated Lenovo-Products-MIB to 2017er Version
Co-authored-by: Neil Lathwood <[email protected]>
* STP module rewrite WIP
* Finish rewrite
* Ignore disabled and log root/topology changes
* Remove interfaces for now
* fix style
* Lint fixes
* Document ResolvesPortIds and hide map functions
* whitespace fixes
* Revert to stpInstances in case someone writes mstp support
* missed one
* phpstan fixes
* Handle table and oids separately
* forgot to register observer
* Test data and correct non-table handling in SnmpResponse->table()
* update test
* test data
* revert aos7 silly things
* minimal polling
* Update test data
* order ports_ntp and rename new field to port_index
* forgot the db_schema
* revert ciena-sds port things
* MSTP support, maybe
* Adding test data
* Filter bad lines instead of discarding the entire snmp response
and capture fixes and test data
* fresh data
* add os data
* update data, ignore unfound ports, obviously bad device implementation.
* fixes
* Ignore context files in os detection test
* Remove empty table data
* add ciena-sds vlan
* designatedCost column is too small
* Update stp webui
* Refactor code to interfaces, to allow vendor mibs
* update schema
* fix issues added by abstraction
* STP fixes
* Default to no context for vlan 1
* never store vlan 1
* Update test data
* remove eltex brokenness
* fix style
* fix stan
* Fix Rewrite MAC to Hex padding with floats
* fix sqlite migration
* Add ubiquiti Airfiber 60
* New AF60 data and MIB
* Stylci fix and small additions
* Update test data
* Stylefix
* Remove the weird ubiquity oids containing encoded mac addresses
* Updated test data
* Remove more complex sensors for now to be added after the conflict airos airos-af60 is solved
* Fix hardware and OS
* To be verified is this is the most practical / clean way of doing it
* Advanced wireless and MCS state sensor
* Fix link capacity multiplier and active link
* Test data update fix lint
* Maybe better
* Fix Temperature Sensor for AirOS 8
* Update airos_airos8.json
* Update airos.json
* Add new skip_values feature to deal with Ubiquiti nonsense.
Tweak test data to test the change
fix not_regex
Co-authored-by: Tony Murray <[email protected]>
* added new sensors to mes23xx
* ci
* copy/paste error
* ci
* cleanup + testdata
* yaml
* yamlnew
* added [no_bulk] for PoE discovery
* fully qualified OID name
* forcewalk param
* [snmp][no_bulk]
* var names, test, schema
* Key off OIDs, not mibs
luminato is POC and needs to be reverted before merge.
* fix up os schema
* docs
* remove luminato arbitrary changes
Co-authored-by: Tony Murray <[email protected]>
* Initial Support for Fujitsu RX300 with iRMC4
Initial Support for Fujitsu RX300 with iRMC4 (might work for other servers, too)
* Fixed Typo in power consumption
* Changed MIB-Name and added sysDescr for more granular detection
* Update fujitsuiRMC_rx300.snmprec
changed serial to a generic one
* Update fujitsuiRMC_rx300.json
Updated to use correct serial number
* Update fujitsuiRMC_rx300.snmprec
* Update fujitsuiRMC_rx300.json
* Tried to create a discovery yaml with valid num_oid and valid test data
* Update fujitsuiRMC.yaml
removed remaining index parameter (forgot them from previous testing)
* Update fujitsuiRMC_rx300.json
Updated test data to reflect recent changes
Co-authored-by: Neil Lathwood <[email protected]>
* Initial commit of DCP-M
* Match on system name DCP
* Fix matching regex
* Add pre-cache and dbm discovery
* Show dbm graph
* Adding snmpsim data
* Fix styleCI issue
* Detect dcp-m mib
* DCP-M Progress
* Fix CI issue
* Removing pre-cache and dbm files
* Do not include empty tables in test data
* empty data is simpler to check now
* Update test data
* revert comment options that block update all test data
* clean existing data
* fixes
* another fix
* remov extra sensors???
* why is that using that ip...
* missed an empty table
* missed one
* restore ftos
* revert another ftos
* revert ird
* restore timos
* restore timos_7705
* oops
* double oops
* timos mpls
* timos_hc
* another timos_hc fix
Marvin KuurstraandGitHub
NonStop NetworksandGitHub
Simon LockhartandGitHub
Martin22andGitHub
Zane C. Bowers-HadleyandGitHub
Peca NesovanovicandGitHub
Dan KerseandGitHub
JamesandGitHub
Fehler12andGitHub
PipoCanajaandGitHub
eskyuuandGitHub
Charly ForotandGitHub
martinbergandGitHub
Martin22andGitHub
WheelandGitHub
KonstantinandGitHub
Heath BarnhartandGitHub
Henne Van OchandGitHub
Arnoud VermeerandGitHub
johnstruseandGitHub