* Fix Zynos temp warn limit
And others, but this seems to be the only one that uses
remove some odd limit restriction in the poller
* More consistent rounding for sensor limits
* round all numeric limits to 10 digits
* update test data
* Remove complex calculation as negative limit values are already swapped as needed.
* ZyXEL XGS4600-32F
- Added mib for diagnostics
- CPU/Mem
- Temp/Fan/Voltage
- Updated zyxel group mempools
- Updated test data
- snmprec
- json
- Altered ZyWall
- To exclude XGS switches
* Defined ZYXEL-HW-MONITOR-MIB at the top of file
* Removed .MIB
* update some mibs
* add virtual router ports
* coding style
* refactor
* some refactoring
* some typos
* add snmprec
* Fix capturing VRF entries with no ports
* updated test data
* manually fix test data
Not going to try to fix the data capture for backslashes at this time.
* Revert "manually fix test data"
This reverts commit 2c98450706.
* timos data for net-snmp 5.7.3 ?????
* Updated dlink support with additional health,mempools and processors
* Update dlink.inc.php
* Update dlink.inc.php
* Added test data
* add tests/data/dlink_dgs-1510-28.json
* actual data for the new items
hopefully doesn't break anything
Mostly issues with snmp oids and options containing spaces. Try to remove all of those.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Adding ifType to base_oids
* Improve discovery (update ifType) and polling (save ifType)
* Updated test data
* Updated json test data
* vlan isn't filtered by default :P
* With default ignored ports
* Update newer test data
* Update to Added support for HeliOS 10Ghz failover to 5Ghz state sensor
Converted /includes/discovery/sensors/state/helios.inc.php to yaml
Test units included
CLA has been signed
* Added support for CeraOS TX Mute Status state sensor, NTP Client Lock Status state sensor.
Updated CeraOS temperature sensor, now called from includes/definitions/discovery/ceraos.yaml - removed includes/discovery/sensors/temperature/ceraos.inc.php
Corrected issue with CeraOS temperature reverting to zero after polling (added a trailing . to the num_oid)
Amended includes/definitions/discovery/helios.yaml with changes as advised by Neil Lathwood and Tony Murray
* Added unit test data and corrected ceraos.yaml validation error
* Added support for Ceraos Wireless Sensors (php)
Cross Polar Interference
Wireless Frequency
Added Ceraos state sensors (yaml)
NTP Client Lock Status
Tx Mute Status
Radio Operational Status
Remote Radio Operational Status
IDU Temperature
Power Amplifier Temperature
* Fix up tests, etc
* remove helios changes, fix style
* Use of dynamic_discovery_get_value in can_skip_sensor in order to use all available oids in skip_values
* Use LibreNMS\Device\YamlDiscovery code instead of keeping duplicated function can_skip_sensor
* Fix Travis errors
* Added support for SAF CFM L4 wireless device
* Added copyright statement according to LibreNMS documentation
* Added snmp test data and excluded some discover modules from os definition
* Style issue fixed
* More descriptive function
* MIB file rename
* Rename MIB file and change other files accordingly
* Added test data
* Removed debug statement
* Last checks
* Style changes
* Style changes
* Style changes
* Style changes
* Code restructure to make it more readable
* Fixed error in foreach
* Style issues
* Formatting of states within Yaml changed to make it more readable
* Omit default arguments
* Better code and modules only in CFM-M4P-MUX
* Chaged cfml4 to cfm
* Update Sensor.php
* Update Sensor.php
* Better handling of scientific numbers
* Better handling of scientific numbers
* New test data
* Correction on handling trailing zeros
* Different way of cleaning the numbers based on Tony's input
Changed the Temperature High threshold for a HPE Comware Switch to the values provided by snmp.
This means the actual threshold configured in the switch is used over any predefined/auto calculated thresholds by LibreNMS.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
Require it explicitly. Makes it easier to understand and matches the style of other values
Questionable YAML changes (either broken before or now broken):
secureplatform: haStatCode
ptp600: receiveModulationMode
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
Tested on MX and EX series, works fine.
Skip slots that are empty and pull all sensors in jnxFruTable, data from old code is preserved.
* New os Eltek WebPower - files + test files
* OS eltek-webpower - minor fix to mib query.
* OS eltek-webpower - sensor and state data improvements.
* OS Eltek Webpower - Created battery symmetry test and battery bank delta voltage support.
* OS Eltek Webpower - symmetry code fix.
* OS Eltek Webpower - symmetry code fix.
* OS Eltek Webpower - symmetry code fix.
* new os eltek - rectifier state fix
* Updated json test data
* Update eltek-webpower.json
* Update eltek-webpower.yaml
* Update eltek-webpower.yaml
* Adjustment in #9301: Eaton Galaxy HW seems to be the exception here with divisor 10 for voltage
* fix for APC Galaxy UPS (and not Eaton anymore)
* remove Galaxy test data from eaton-mgeups files
* tests: APC Galaxy 7000 test data
* update os polling for ray
I changed hardware detection, because in old format i got a hostname instead of hardware. I added features tab also.
* Added wireless rate sensors
I added sensors for Netbitrate and Maxbirate
* deleted old ray.png
* added better resolution logo for ray
* Update Ray.php
* Delete ray.png
* Add files via upload
* Delete ray.svg
* added ray.svg logo
* update ray.snmprec
* Update Ray.php
* Updated json test data
* added state support for RAy Radios
* Update ray.snmprec
* netagent2 - 3Phase UPS support
* Revert "netagent2 - 3Phase UPS support"
This reverts commit 7900bc5bc0.
* OS netagent feature update - 3 phase support
* OS netagent2 update - 3phase support code cleanup
* OS netagent2 update - 3phase support code cleanup 2
* Netagent2 - Add status unknown to smoke and water states.
* NetAgent2 - changed detection method like murrant suggested.
* netagent2 - XPPC-MIB - 3 phase states support
* Added json test data
* MGE: Improve support for Galaxy devices
* MGE: Improve support for Galaxy devices
* MGE: Improve support for Galaxy devices
* rfc1628 adaptations for Eaton MGE Galaxy 7000
* eaton-mge: test data on a Galaxy 7000
* rfc1628 adaptations for Eaton MGE Galaxy 7000
* rfc1628 adaptations for Eaton MGE Galaxy 7000
* eaton-mgeups: test data on a Galaxy 7000
* Add upsmgUtilityFailure and upsmgUtilityRestored trap support for eaton-mgeups
* dev: eaton-mgeups: OID in the dynamic definition for discovery
* dev: eaton-mgeups: cleaning
* add contributor
* add contributor
* Updated DataDomain MIB, Added DataDomain Storage poller and discovery
* Fixed issues pre-commit issues
* Removed extra blank lines
* Make polling less redudant
* Remove blank line
* Remove device os detection since it's not needed. Add test data for DataDomain
* Added json test file
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
NOTE: Those devices come all with same `sysName` so `$config['allow_duplicate_sysName'] = true;` is needed to have more than 1 working.
* fixing sentry3 temperature sensor issues: read all sensors not just first two, fix reading limit and current values, fixing snmp get options
* fixing sentry4 temperature sensor issues: read all sensors not just first two, fix reading limit and current values, fixing snmp get options
* fixing code style issues
* addressing review items from murrant, removing individual snmp_gets, fixing fahrenheit to celcius code back
* addressing review items, putting back the celcius fahrenheit conversion logic back
* using snmpwalk_cache_oid instead of reinventing in sentry3 code
* using pre-cache for sentry4 temp sensors, addressing review items
* checking all sentry3 humidity sensors instead of first two, bulk reading instead of individual gets
* addressing style issues
* pre-caching sentry4 humidity warning table removing duplicate temp sensor event config table
* adding two more sentry snmprec files after temperature and humidity sensor updates
* making sensor index values for sentry3/4 unique
* adding sentry3 and 4 test data files after temperature and humidity sensors update
* Feature: Collect VRP Entity details in the Huawei MIB
* Feature: Collect VRP Entity details in the Huawei MIB - Add Test Data
* Renaming of the test file vrp_5720_vrf.snmprec
* Added json test files
* Update vrp_5720_vrf.snmprec
* Update vrp_5720_vrf.snmprec
* Update vrp_5720_vrf.json
* Updated processor and mempool discovery to limit descr field
* Updated test
* Updated tests again
* Updated json test data
* Update vrp_ce12804-entity.json
* Update vrp_ce12804-entity.json
* Update vrp_5720_vrf.json
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
In SmartAX MA5683T/MA5603T Starting index for Per Card power starts in '0' instead '1'. '0' was also the index for Total Chassis Power.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Most were fine as they hardcoded the in into the query.
Change them all to use PDO properly.
Did not fix IRCBot, they are are all hardcoded.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
An exception in one module should not interrupt the process for other modules.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* Improved SmartAX OS support. Added CPU&Temperature for each card and hardware detection
* Minor fixes
* Uploaded test data
* Moved to snmpwalk_array_num()
* Fixed Temperature
* Added sensor power
* Fixed Style issues and proper hardware detection
* Fixed last style issue
* Last update. Added version and serial. Added traffic and processors mini graphs
Fix for issue #8950
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* Added Arris C3 to cmts.yaml
* Added Arris C3 hardware
* ARRIS CMTS->Move from cmts to arris_c4 yaml
* Fixed some Arris_c4 definitions
* Added Arris C3 CMTS
* Fixed some typos
* Arris C3 test files
* Arris C4 test files
* Deleted not anymore valid files
* Renamed from underscore
* Fixed some typos
* Correct test files
* Removed old snmprec files
* Correct test files v2
* Deleted more old files
* Return to cmts for valid_sensor() for Arris C4/C4c
* Re-done test files
* Re-do test files after rebase
Added discovery for state of serverscheck flooding sensors.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
fix#8755
I have not added test data as it would require filterting quite some LLDP/IP's etc information.
Use Log facility when Laravel is booted.
Update init.php so we can easily boot Laravel for CLI scripts. (and just Eloquent, but that may go away)
Move all debug setup into set_debug() function and use that across all scripts.
Log Laravel database queries.
Send debug output to librenms log file when enabling debug in the webui.
Allow for colorized Log CLI output. (currently will leave % tags in log file output)
** Needs testing and perhaps tweaking still.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Mostly useful for debugging
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Currently has a file handle leak (and will eventually run out of handles) related to the self update process.
Either need to fix that or rip out self-update and leave that up to cron or something.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
