* Updated DataDomain MIB, Added DataDomain Storage poller and discovery
* Fixed issues pre-commit issues
* Removed extra blank lines
* Make polling less redudant
* Remove blank line
* Remove device os detection since it's not needed. Add test data for DataDomain
* Added json test file
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
NOTE: Those devices come all with same `sysName` so `$config['allow_duplicate_sysName'] = true;` is needed to have more than 1 working.
* added PBI MIB
I finally found a MIB for PBI device
* added PBI-MAIN-MIB
* added another PBI MIB
* added PBI MGSYSTEM-MIB
* added ird.yaml to definition
* added senors discovery for PBI devices
* added ird.inc.php for polling
* added logo for PBI
* added ird.json
* Rename PB-MAIN-MIB to PBI-MAIN-MIB
* Update ird.json
* Update PBI-4000P-5000P-MIB
* Update PBI-MAIN-MIB
* Update PBI-MGSIGNALCHARACTERISTICS-MIB
* Update PBI-MGSYSTEM-MIB
* Create ird.snmprec
* Updated json test file
* deleted frequency from yaml
I think that better will be see values from frequency in wirelles frequency, where it is in MHz
* Create Ird.php
* Update Ird.php
* Update Ird.php
* Update ird.json
* Update Ird.php
* fixing sentry3 temperature sensor issues: read all sensors not just first two, fix reading limit and current values, fixing snmp get options
* fixing sentry4 temperature sensor issues: read all sensors not just first two, fix reading limit and current values, fixing snmp get options
* fixing code style issues
* addressing review items from murrant, removing individual snmp_gets, fixing fahrenheit to celcius code back
* addressing review items, putting back the celcius fahrenheit conversion logic back
* using snmpwalk_cache_oid instead of reinventing in sentry3 code
* using pre-cache for sentry4 temp sensors, addressing review items
* checking all sentry3 humidity sensors instead of first two, bulk reading instead of individual gets
* addressing style issues
* pre-caching sentry4 humidity warning table removing duplicate temp sensor event config table
* adding two more sentry snmprec files after temperature and humidity sensor updates
* making sensor index values for sentry3/4 unique
* adding sentry3 and 4 test data files after temperature and humidity sensors update
* VRP: improving extraction of HW and Version
* VRP: Improving extraction of HW and Version - CodeClimate update
* VRP: Improving extraction of HW and Version - Review and debug code cleaning
* VRP: Improving extraction of HW and Version - resolve OIDs and swap order of poll
* VRP: Improving extraction of HW and Version - resolve OIDs and swap order of poll
* Device: VRP: Update test data
* Device: VRP: Travis code clean
* Device: VRP: Update test data for variants
* Device: VRP: Update test data for variants
* Feature: Collect VRP Entity details in the Huawei MIB
* Feature: Collect VRP Entity details in the Huawei MIB - Add Test Data
* Renaming of the test file vrp_5720_vrf.snmprec
* Added json test files
* Update vrp_5720_vrf.snmprec
* Update vrp_5720_vrf.snmprec
* Update vrp_5720_vrf.json
* Updated processor and mempool discovery to limit descr field
* Updated test
* Updated tests again
* Updated json test data
* Update vrp_ce12804-entity.json
* Update vrp_ce12804-entity.json
* Update vrp_5720_vrf.json
* Added BGP Peer Descriptions
* Fixed formatting
* Added to device routing tab too
* Some text formatting
* Test files
* Added default null to bgpPeerDescr
* Added db_schema.yaml
* Fix default value for bgpPeerDescr
* Fixed Order and Search box
* Added glyphicon for success/error
* Switch to toastr notification
* Removed unused bootstrap code
* device: Initial support for CXR-Networks Terminal Server
* device: Support for CXR-Networks Terminal Server - CodeClimate + cleaning
* device: renamed cxr-networks-ts and code improvement
* device: cxr-networks-ts test data
* device: renamed os as cxr-ts
* device: renamed os as cxr-ts, test data
* fix fan state
fix fan duty instead of rpm
* changed check to os definition bad_fanspeed
* revert back fan rpm
* Fix other state generics
* Update fanspeed.inc.php
* Update edgeswitch.json
* snmpsim tests data
* Update tests
* target db_schema
* Database schema cleanup
Remove several inconsistencies (mostly with data types and lengths)
Make things a bit nicer to implement with Laravel database migrations.
poller* tables had f'd up indexes
* Update tests, extra noise because db returns numeric types now.
* Update test data again.
* fix 253 migration for mysql 5.3
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
In SmartAX MA5683T/MA5603T Starting index for Per Card power starts in '0' instead '1'. '0' was also the index for Total Chassis Power.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* add tests for v1 of the JSON NTP client stuff
* update the NTP stuff to work with legacy and JSON
* add the NTP client legacy tests
* Update ntp-server.inc.php
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* convert zfs over to use json_app_get
* make the format checker happy
* change array brackets used and update for upcomming changes to json_app_get
* change it over to do exception checking
* styling cleanup
* cleanup error handling
* update to the latest json_app_get
* correct a bit of logic for legacy and cleanup some formatting
* add the snmprec files for the ZFS app
* add the tests for ZFS with legacy extend
* add another check
* convert these from base64 to hex
* remove improper commas
* Match upstream spacing
* fix typo
* fix bad data and zfs metrics, allow float values
* bad capture
* improve comment
* Update db_schema.yaml
* Improved SmartAX OS support. Added CPU&Temperature for each card and hardware detection
* Minor fixes
* Uploaded test data
* Moved to snmpwalk_array_num()
* Fixed Temperature
* Added sensor power
* Fixed Style issues and proper hardware detection
* Fixed last style issue
* Last update. Added version and serial. Added traffic and processors mini graphs
I removed an incorrect mib and added the correct one. Changed initial detection to use mib instead of numeric oid. Removed trim function. Added wireless sensor class.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* Fix invalid json in test data
Most simply needed the syntax fixed
fail2ban needed updated data (added non-zero values in test data too)
awplus: ntp application cannot be enabled by tests since it doesn't use snmp extend... ntp app is enabled by ntp module... pass on that for now.
* missed awplus change somehow...
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Fix for issue #8950
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* Added Arris C3 to cmts.yaml
* Added Arris C3 hardware
* ARRIS CMTS->Move from cmts to arris_c4 yaml
* Fixed some Arris_c4 definitions
* Added Arris C3 CMTS
* Fixed some typos
* Arris C3 test files
* Arris C4 test files
* Deleted not anymore valid files
* Renamed from underscore
* Fixed some typos
* Correct test files
* Removed old snmprec files
* Correct test files v2
* Deleted more old files
* Return to cmts for valid_sensor() for Arris C4/C4c
* Re-done test files
* Re-do test files after rebase
* Fix Calix OS definitions
The main change is EXA (E7, etc) and B6 (Occam) devices are now their own OS
Now the follow OS exist:
exa: E7 EXA, E5-400, E5-48, E3-48, E3-8G
occamos: B6
Unchanged:
calix: E5-1**, E3-12C
axos: E7-2 AXOS, E9-2, E3-2, E5-520, E5-16F, E3-16F, E5-30x
* fix tests
exa_e7-2 seems like bogus data.
* additional tests, fix an error in the yaml
* Remove extra line return
* Add missed file
Added discovery for state of serverscheck flooding sensors.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
fix#8755
I have not added test data as it would require filterting quite some LLDP/IP's etc information.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
- Added port discovery for cmm3 (not available for cmm4, not that i could find)
- Added discovery for cmm4
- Added Power port cmm4
- Removed Processor bug by disabling processor on device.
I am unable to test CMM4 and may need someone to do so or review for possible errors.
Fixes Issues #8732, #8731
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
fix#8781
* device: Initial support for Allied Telesis Wireless devices
This commit provides basic info for Allied Telesis TQ Access Points
* device: allied wireless initial test data
* device: allied wireless
Fix up mibs.
-- Moved ATKK-WLAN-ACCESS to awplus mibs folder
--- ATKK-WLAN-ACCESS mib relies on AT-SMI-MIB
-- Changed Allied-wireless to look at awplus mibs folder instead of allied
--- As above due to newer AT-SMI-MIB file
- Performed new snmprec with walk on enterprise OID
-- For some reason the enterprise and wireless specific tables are not
walked by a default snmpwalk.
* add snmpwalk for analysis
* Attempt at wireless polling
* Delete allied-wireless-snmpwalk.txt
* device: fix basic allied wireless
* Update allied-wireless.json
* Simplify Allied Wireless test data
* fix allied-wireless definition
* device: allied-wireless renamed to allied-tq
* Update allied-tq.yaml
