I added some description how to attach templates to rules, because this was not very obvious to me.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Hello! I've made a first version of Alert Transporting module for Kayako Classic Servicedesk. May be it is possible to use with Kayako OnPremise version (not sure).
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Also, fix some incorrect config names (rrd_step -> rrd.step)
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Real fix is to install mysqlnd
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Re-write ospf polling using Eloquent
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* Workaround for billing with large bps
Workaround for mysqli driver mucking up BIGINT
Real fix is for users to switch to mysqlnd
* Add note
* More bigints
* convert zfs over to use json_app_get
* make the format checker happy
* change array brackets used and update for upcomming changes to json_app_get
* change it over to do exception checking
* styling cleanup
* cleanup error handling
* update to the latest json_app_get
* correct a bit of logic for legacy and cleanup some formatting
* add the snmprec files for the ZFS app
* add the tests for ZFS with legacy extend
* add another check
* convert these from base64 to hex
* remove improper commas
* Match upstream spacing
* fix typo
* fix bad data and zfs metrics, allow float values
* bad capture
* improve comment
* Update db_schema.yaml
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* Improved SmartAX OS support. Added CPU&Temperature for each card and hardware detection
* Minor fixes
* Uploaded test data
* Moved to snmpwalk_array_num()
* Fixed Temperature
* Added sensor power
* Fixed Style issues and proper hardware detection
* Fixed last style issue
* Last update. Added version and serial. Added traffic and processors mini graphs
I removed an incorrect mib and added the correct one. Changed initial detection to use mib instead of numeric oid. Removed trim function. Added wireless sensor class.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Gut dbFacile
mres() now does nothing... could have some vulnerable queries, but most are ok
TODO
- [x] IRC client broke
- [x] Install broke
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
When disabling or ignoring ports in the "Ports Settings" (http://<nms_host>/device/device=<device_id>/tab=edit/section=ports/) then the ports are still shown under the Port tab for a specific device (http://<nms_host>/device/device=<device_id>/section=ports/) and in the Overall Traffic Graph.
To keep the view and graph more clear, this change only shows the ports which are not disabled or ignored.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [y] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Removed sysObjectID extension to allow discovery of older RAD Airmux 400 devices
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* Fix invalid json in test data
Most simply needed the syntax fixed
fail2ban needed updated data (added non-zero values in test data too)
awplus: ntp application cannot be enabled by tests since it doesn't use snmp extend... ntp app is enabled by ntp module... pass on that for now.
* missed awplus change somehow...
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
As most Applications use wget to download the scripts, I've altered the RaspberryPi Application to get listed in same way.
Though it does appear LibreNMS doesn't support this Application anymore
* Updates to snmptrap handling
fix a bug in findDeviceByIP. Add more tests for that.
Move handle outside of the Trap class, it doesn't fit.
Add developer docs.
* fix tests copy paste issue.
* Fix findByIp when port may not exist.
* Logging: Output context (and extra) if they exist
* Generic trap event logging and new config setting.
Fix for issue #8950
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Simplify fping function and add debug output.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* Fixed snmptraps.
* Fixed space
* Added bgp down/up and authentication failure
* Fixed typo
* Fixed some typos, arrays, astext and format_hostname
* Updated documentation
* Moved code to a function
* Some refactor
* Minor fixes
* Minor fixes 2
* More minor fixes
* Changes requested by Tony
* Minor fixes
* Moved include to snmptrap.php
* Refactor traps to use object oriented code.
Should trigger events too/instead, but we'll leave that.
Testing todo
* Add tests and fix things so they actually work
Not checking events yet.
* Fixed typo and severity level
* Update composer deps, I think the lock file wasn't right.
add json and mbstring extension deps while I'm at it.
* Fix several issues with phpunit fixtures
Hi
This patch does add the MAX graph (AREA) for the Service graphs. And the Max numerical value is as well taken from the MAX RRD value instead of AVERAGE.
When scaling to larger amount of time, displaying like today the average only makes all spikes disappear, and the Max value does not make much sense.
I also added a color choice to *pinkify* the "Loss" graphs.
Exemple with HTTP graphs polling google:
PipoCanaja
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
The only mention in the sourcecode I can find to 'smokeping_server_hostname' is in this doc, and such an option doesn't really make sense. You will still require the $config['smokeping']['integration'] = true option though.
