mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00

VVelox 06b85f5b07 docs: more md linting (#10371 )

* clean 1-Minute-Polling.md formatting

* cleanup formatting for Adding-a-Device.md

* clean up formatting of Cleanup-options.md

* cleanup formatting some for CLI-Tools.md

* cleanup formatting for Syslog.md and Configuration.md

* cleanup formatting for Device-Sensors.md

* cleanup formatting for Device-Troubleshooting.md

* cleanup Discovery Support.md

* cleanup Environment-Variables.md

* cleanup Example-Hardware-Setup.md and FAQ.mg

* update Features.md, Install Validation.md, Perfermance.md, Poller Support.md, and index.md

* cleanup Remote-Monitoring-VPN.md, SNMP-Configuration-Examples.md, and SSL-Configuration.md

* lots of updates for Installation docs

* more installation doc cleanup

* more formatting cleanup

* clean Work-Map.md up some

2019-07-18 21:25:53 -05:00

858 B

Raw Blame History

source: Support/Device-Troubleshooting.md path: blob/master/doc/

Capture Debug Information

You can use this feature to run Debug on Discovery, Poller, SNMP, Alerts. This output information could be helpful for you in troubleshooting a device or when requesting help.

This feature can be found by going to the device that you are troubleshooting in the webui, clicking on the settings icon menu on far right and selecting Capture.

Discovery

Discovery will run and output debug infomation.

Poller

Poller will run and output debug information.

SNMP

SNMP will run SNMP Bulk Walk on the device and output the information.

Alerts

Alerts Capture is handy when you are creating alerts and need to see if your alert rule matches.

858 B Raw Blame History