mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
7445a736a6
git-svn-id: http://www.observium.org/svn/observer/trunk@1576 61d68cd4-352d-0410-923a-c4978735b2b8
1559 lines
45 KiB
Plaintext
1559 lines
45 KiB
Plaintext
-- SECTION 1: Top Level Definitions
|
|
|
|
|
|
CENTILLION-CONFIG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
|
|
-- Centillion Configuration MIB Release 2.1.0
|
|
-- Revision 07/11/00
|
|
|
|
-- Copyright 1994-2000 Nortel Networks, Inc.
|
|
-- All rights reserved.
|
|
-- This Bay Networks SNMP Management Information Base Specification
|
|
-- (Specification) embodies Bay Networks' confidential and
|
|
-- proprietary intellectual property. Bay Networks retains all
|
|
-- title and ownership in the Specification, including any
|
|
-- revisions.
|
|
|
|
-- This Specification is supplied "AS IS," and Bay Networks makes
|
|
-- no warranty, either express or implied, as to the use,
|
|
-- operation, condition, or performance of the Specification.
|
|
|
|
-- This file defines the MIB for configuration and maintenance of the
|
|
-- system tables.
|
|
-- All configuration objects are not saved across system resets unless
|
|
-- the configruation is saved in flash memory, unless otherwise specified.
|
|
|
|
|
|
-- Imports
|
|
|
|
IMPORTS
|
|
DisplayString, PhysAddress
|
|
FROM RFC1213-MIB
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
Counter, TimeTicks, IpAddress
|
|
FROM RFC1155-SMI
|
|
StatusIndicator, BitField, MacAddress,
|
|
EnableIndicator, sysConfig
|
|
FROM CENTILLION-ROOT-MIB;
|
|
|
|
-- Textual Conventions
|
|
|
|
VlanId ::= INTEGER(1..4095)
|
|
|
|
-- Groups
|
|
|
|
sysTableConfig OBJECT IDENTIFIER ::= { sysConfig 1 }
|
|
sysImgInfo OBJECT IDENTIFIER ::= { sysConfig 2 }
|
|
sysMcpRedundInfo OBJECT IDENTIFIER ::= { sysConfig 3 }
|
|
sysNetProtocol OBJECT IDENTIFIER ::= { sysConfig 14 }
|
|
sysTFTPGroup OBJECT IDENTIFIER ::= { sysConfig 18 }
|
|
sysSNMPGroup OBJECT IDENTIFIER ::= { sysConfig 19 }
|
|
netbiosGroup OBJECT IDENTIFIER ::= { sysConfig 21 }
|
|
lnmGroup OBJECT IDENTIFIER ::= { sysConfig 25 }
|
|
|
|
sysIpProtocol OBJECT IDENTIFIER ::= { sysNetProtocol 1 }
|
|
|
|
|
|
-- SECTION 2: MCP System Table Configuration Information
|
|
--
|
|
-- This information is specific to the system tables and may not be
|
|
-- visible to the user.
|
|
--
|
|
|
|
--- System Image Global Information
|
|
|
|
sysImgGbl OBJECT IDENTIFIER ::= { sysImgInfo 1 }
|
|
|
|
sysImgGblInvokeSrc OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
image1(2),
|
|
image2(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The source of system image to be invoked at next boot.
|
|
Default setting is image1.
|
|
|
|
If the desired image cannot be invoked,
|
|
another image (if found and valid) will be invoked
|
|
automatically at next boot.
|
|
|
|
Note that if the system does not support
|
|
dual boot image, then image1 should be used."
|
|
::= { sysImgGbl 1 }
|
|
|
|
|
|
sysImgGblLoadDst OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
location1(2),
|
|
location2(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The non volatile memory destination where
|
|
the system image will be (programmed by boot loader)
|
|
down loaded to at next boot.
|
|
Default setting is location1.
|
|
|
|
Note that if the system does not support
|
|
dual boot image, then location1 should be used."
|
|
::= { sysImgGbl 2 }
|
|
|
|
|
|
--- System Image Table Information
|
|
|
|
sysImgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SysImgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table that provides additional information
|
|
about the system images. The number of
|
|
entries in the table is determined by the
|
|
number of index of the system image."
|
|
::= { sysImgInfo 2 }
|
|
|
|
|
|
sysImgEntry OBJECT-TYPE
|
|
SYNTAX SysImgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A row in the table of additional information
|
|
about the system images. Entries can not
|
|
be created or deleted via SNMP requests."
|
|
INDEX { sysImgIndx }
|
|
::= { sysImgTable 1 }
|
|
|
|
|
|
SysImgEntry ::= SEQUENCE {
|
|
sysImgIndx INTEGER,
|
|
sysImgVer DisplayString,
|
|
sysImgStatus INTEGER
|
|
}
|
|
|
|
|
|
sysImgIndx OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index of the system image."
|
|
::= { sysImgEntry 1 }
|
|
|
|
|
|
sysImgVer OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..127))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version of the system image stored in
|
|
non volatile memory.
|
|
|
|
Note that if the system does not support
|
|
dual boot image, then zero length string
|
|
should be returned for image2."
|
|
::= { sysImgEntry 2 }
|
|
|
|
|
|
sysImgStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
good(2),
|
|
bad(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of system image stored in non volatile memory."
|
|
::= { sysImgEntry 3 }
|
|
|
|
|
|
--- System MCP Redundancy Global Information
|
|
|
|
sysMcpRedundGbl OBJECT IDENTIFIER ::= { sysMcpRedundInfo 1 }
|
|
|
|
sysMcpRedundNxtGblState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
enable(2),
|
|
disable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of the Redundant MCP during next boot.
|
|
Request to enable or disable redundant MCP. This
|
|
will update the configuration information for the
|
|
redundant MCP pair. It takes effect during next
|
|
reset."
|
|
::= { sysMcpRedundGbl 1 }
|
|
|
|
|
|
--- System MCP Redundancy Table Information
|
|
|
|
sysMcpRedundTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SysMcpRedundEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table that provides additional information
|
|
about the system MCP redundancy. The number of
|
|
entries in the table is determined by the
|
|
number of index of the system MCP redundancy."
|
|
::= { sysMcpRedundInfo 2 }
|
|
|
|
|
|
sysMcpRedundEntry OBJECT-TYPE
|
|
SYNTAX SysMcpRedundEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A row in the table of additional information
|
|
about the system MCP redundancy. Entries can not
|
|
be created or deleted via SNMP requests."
|
|
INDEX { sysMcpRedundIndx }
|
|
::= { sysMcpRedundTable 1 }
|
|
|
|
|
|
SysMcpRedundEntry ::= SEQUENCE {
|
|
sysMcpRedundIndx INTEGER,
|
|
sysMcpRedundPriority INTEGER,
|
|
sysMcpRedundType INTEGER,
|
|
sysMcpRedundOperState INTEGER,
|
|
sysMcpRedundCfgStatus INTEGER
|
|
}
|
|
|
|
|
|
sysMcpRedundIndx OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index of the system MCP redundancy. Currently
|
|
represents the slot number that this MCP is in."
|
|
::= { sysMcpRedundEntry 1 }
|
|
|
|
|
|
sysMcpRedundPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MCP redundancy priority which is used for primary
|
|
MCP selection. Default setting is zero."
|
|
::= { sysMcpRedundEntry 2 }
|
|
|
|
sysMcpRedundType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
regular(2),
|
|
primary(3),
|
|
secondary(4),
|
|
switching(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Functional type of MCP in the chassis. Currently only
|
|
ATM MCPs can be used for the redundant function. Only
|
|
MCPs in slots 1 and 2 can participate in redundancy.
|
|
But other ATM MCPs can still be plugged into the chasis.
|
|
This field represents the way that an MCP is
|
|
participating in the redundancy."
|
|
::= {sysMcpRedundEntry 3 }
|
|
|
|
sysMcpRedundOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
active(2),
|
|
inactive(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current state of this MCP"
|
|
::= {sysMcpRedundEntry 4 }
|
|
|
|
sysMcpRedundCfgStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
user-enable(2),
|
|
user-disable(3),
|
|
default-enable(4),
|
|
default-disable(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"State of the Redundant MCP. Other(1) is used when the
|
|
MCP is not participating in redundancy, default
|
|
enable/disable used to represent the factory default
|
|
case. User enable/disable used when a user changes
|
|
from the factory default state."
|
|
::= { sysMcpRedundEntry 5 }
|
|
|
|
-- The following objects for Redundant MCP are for future
|
|
-- implementations when there is more time to implement the drivers
|
|
-- support.
|
|
--
|
|
-- sysMcpRedundPriStateChg OBJECT-TYPE
|
|
-- SYNTAX COUNTER
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "Number of times this MCP has been a Primary MCP."
|
|
-- ::= { sysMcpRedundEntry 6 }
|
|
--
|
|
-- sysMcpRedundSecStateChg OBJECT-TYPE
|
|
-- SYNTAX COUNTER
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "Number of times this MCP has been a Secondary MCP."
|
|
-- ::= { sysMcpRedundEntry 7 }
|
|
--
|
|
-- sysMcpRedundLastHeartBeat OBJECT-TYPE
|
|
-- SYNTAX TimeTicks
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "Last time the MCP received a heart beat pulse from
|
|
-- the other MCP which is the participant in the redundant
|
|
-- MCP paring and does not include other ATM MCPs that may
|
|
-- be in the same chassis."
|
|
-- ::= { sysMcpRedundEntry 8 }
|
|
--
|
|
-- sysMcpRedundFailureDetected OBJECT-TYPE
|
|
-- SYNTAX COUNTER
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "Number of times a redundant partner has failed."
|
|
-- ::= { sysMcpRedundEntry 9 }
|
|
|
|
|
|
|
|
|
|
-- SECTION 3: Routing Information
|
|
--
|
|
-- The RIF Table
|
|
--
|
|
-- The Routing Information Field (RIF) Table contains routing information
|
|
-- used by stations.
|
|
--
|
|
|
|
rifTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RifEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains Routing Information Field (RIF)
|
|
parameters. Entries may be used by one or more stations on
|
|
the switch."
|
|
::= { sysConfig 5 }
|
|
|
|
rifEntry OBJECT-TYPE
|
|
SYNTAX RifEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A single entry in the RIF table."
|
|
INDEX { rifPath }
|
|
::= { rifTable 1 }
|
|
|
|
RifEntry ::= SEQUENCE {
|
|
rifPath
|
|
OCTET STRING,
|
|
rifIndex
|
|
INTEGER,
|
|
rifInUse
|
|
BitField,
|
|
rifCount
|
|
INTEGER,
|
|
rifLength
|
|
INTEGER,
|
|
rifNext
|
|
INTEGER,
|
|
rifPrevious
|
|
INTEGER
|
|
}
|
|
|
|
rifPath OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4..28))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RIF field, read from left to right, i.e. read from the
|
|
switch."
|
|
::= { rifEntry 1 }
|
|
|
|
rifIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index into the RIF table. This index is used to enter a
|
|
RIF in the station table."
|
|
::= { rifEntry 2 }
|
|
|
|
rifInUse OBJECT-TYPE
|
|
SYNTAX BitField
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates that this RIF entry is valid if set. A unique
|
|
RIF entry may be deleted only if it is not in use by a
|
|
station."
|
|
::= { rifEntry 3 }
|
|
|
|
rifCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number stations that this RIF is associated with."
|
|
::= { rifEntry 4 }
|
|
|
|
rifLength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Byte length of the RIF entry."
|
|
::= { rifEntry 5 }
|
|
|
|
rifNext OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Next RIF field."
|
|
::= { rifEntry 6 }
|
|
|
|
rifPrevious OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Previous RIF field."
|
|
::= { rifEntry 7 }
|
|
|
|
|
|
-- SECTION 4: Configuration Modes
|
|
|
|
systemMaxPacketInfoSize OBJECT-TYPE
|
|
SYNTAX INTEGER (516..17800)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The system maximum packet information field size.
|
|
Changing the maximum information size
|
|
does not take effect until the next system reset."
|
|
::= { sysConfig 6 }
|
|
|
|
systemConfigMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other (1), -- custom configuration
|
|
transparentSwitchingNoSTP (2),
|
|
source-route-bridging (3),
|
|
transparent-bridging(4),
|
|
noVirtualRingBridging(5) -- no bridging between Rings
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable describes the current mode of bridging
|
|
configuration in the switch. The bridging mode applies to
|
|
all ports. The value other(1) is a read-only indication that
|
|
the system is in a user customized the system configuration.
|
|
Setting this object will save the configuration into flash
|
|
and issue a system reset command."
|
|
::= { sysConfig 7 }
|
|
|
|
systemConfigIpOption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other (1),
|
|
eraseIP (2),
|
|
preservedIP (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reading this object always returns other(1). Setting of
|
|
this object, which is optional, must be accomplished in
|
|
the same SNMP request that set systemConfigMode."
|
|
::= { sysConfig 29 }
|
|
|
|
maxPerfMode OBJECT-TYPE
|
|
SYNTAX EnableIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current value of the system maximum performance mode.
|
|
Setting this value to enabled causes the system to
|
|
perform in maximum performance mode. Default is disabled.
|
|
This variable does not take effect until the next system
|
|
reset."
|
|
::= { sysConfig 8 }
|
|
|
|
|
|
-- defaultConfigReset no longer supported
|
|
|
|
|
|
configSave OBJECT-TYPE
|
|
SYNTAX BitField
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Save the current configuration into flash memory.
|
|
When read, this value is always clear (1). The value may only
|
|
be set to the set (2) state."
|
|
::= { sysConfig 10 }
|
|
|
|
localAdminMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The system's locally administered MAC address. The current
|
|
operation MAC address may be obtained by the ifPhysAddress
|
|
entry in the ifTable. This parameter will take effect only
|
|
after a reset is issued."
|
|
::= { sysConfig 12 }
|
|
|
|
|
|
configLogin OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The system login object. This object is used to login
|
|
a network management station to the system for configuration.
|
|
The format of the login request follows:
|
|
login indicator.login password,
|
|
where the login indicator is a single byte of the value
|
|
1 = logoff, 2 = login, or 3 = set password and the password
|
|
is the system password. The password must be supplied for
|
|
upon login or altering the password. A manager must first
|
|
login to the system before altering the password.
|
|
When read, the first octet is returned, indicating whether
|
|
a managment station is currently logged in to the system."
|
|
::= { sysConfig 13 }
|
|
|
|
configProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flash(1), -- config obtained via flash
|
|
tftpNoSave(2), -- config obtained via TFTP
|
|
tftpSave(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The protocol used to retrieve system configuration. Flash
|
|
indicates that the configuration is read from the flash.
|
|
tftpNoSave indicates that the TFTP protocol should be used
|
|
to retrieve the current configuration. The new configuration
|
|
is not saved into flash, it is up to the user to save
|
|
the configuration is desired. The new configuration will not
|
|
take effect until the next system reset. tftpSave indicates
|
|
that the newly uploaded configuration will be saved into
|
|
flash, thus may be use to permanently update a configuration.
|
|
The system is automatically reset."
|
|
::= { sysConfig 15 }
|
|
|
|
configFilename OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The name of the configuration file that is sent to the
|
|
server. The actual boot protocol used to retrieve the file
|
|
is determined by configProtocol. This parameter may be
|
|
configured via the network boot protocol."
|
|
::= { sysConfig 16 }
|
|
|
|
configSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flashConfig(1), -- config obtained via flash
|
|
remoteConfig(2) -- config obtained via remote
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An indication of how the system was actually configured.
|
|
flashConfig indicates that the current configuration was
|
|
obtained via flash. remoteConfig indicates that the
|
|
configuration was obtained via the protocol determined
|
|
by configProtocol."
|
|
::= { sysConfig 17 }
|
|
|
|
sonmpTrConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The configuration status of the Token Ring auto-topology.
|
|
If the value of this object is set to enable(1), the
|
|
Token Ring auto-topology frames will be sent out on every
|
|
Token Ring port on every 10 seconds interval. The auto-
|
|
topology frames are received from the Token Ring port and
|
|
logged in the database. If the value of this object is
|
|
set to disable(2), no Token ring topology frames are sent
|
|
and received."
|
|
::= { sysConfig 28 }
|
|
|
|
sonmpTrSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
topFast(2),
|
|
topSlow(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Token Ring topology message (SONMP frame)
|
|
transmit speed. The values that are read/write are:
|
|
topFast(2)...short interval between transmitting
|
|
topSlow(3)...long interval between transmitting
|
|
|
|
The value that is readonly is:
|
|
other(1)...speed unknown, or other value
|
|
|
|
In fast mode, the SONMP frame transmit interval
|
|
is 10 seconds for all SONMP frames.
|
|
|
|
In slow mode, the interval is 60 seconds for master
|
|
NMM announcement SONMP frames, and 70 seconds for
|
|
adjacent SONMP frames."
|
|
::= { sysConfig 30 }
|
|
|
|
srUnknownFrameFlood OBJECT-TYPE
|
|
SYNTAX EnableIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unknown Source Route Frame Flood.
|
|
Enable/Disable flooding of Source Route Frames to
|
|
the next hop while the route to the remote ring
|
|
is being learned and circuit is established."
|
|
::= { sysConfig 32 }
|
|
|
|
srbIeeeBpduEnable OBJECT-TYPE
|
|
SYNTAX EnableIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Send Srb/Ieee BPDU as explorer.
|
|
Enable/Disable the sending of Srb/IEEE BPDU's as explorers,
|
|
allowing some routers to receive the BPDU with a rif."
|
|
::= { sysConfig 33 }
|
|
|
|
tbRifProxyEnable OBJECT-TYPE
|
|
SYNTAX EnableIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Process route descriptor LE_ARP requests in token ring
|
|
transparent bridging LANE. Enable/Disable the processing of
|
|
LE_ARP requests for route descriptors when received from a
|
|
source route ATM attached device."
|
|
::= { sysConfig 34 }
|
|
|
|
cpuClkRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mhz66(1),
|
|
mhz85(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MCP Clock Rate.
|
|
Indicates the speed at which the MCP processor functions."
|
|
::= { sysConfig 35 }
|
|
|
|
maxRids OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximum number of Reassembly Ids.
|
|
Indicates the maximum number of RIDs the switch supports. Determined
|
|
by the XRam installed on the ATM cards in the switch."
|
|
::= { sysConfig 36 }
|
|
|
|
-- SECTION 5: Network Protocol Group
|
|
--
|
|
-- This group contains information used to configure the network
|
|
-- protocols supported by the switch. Each protocol will be defined
|
|
-- by a set of object identifiers specific to the protocol.
|
|
--
|
|
|
|
-- IP Protocol Group
|
|
|
|
-- The sysAddr, sysNetMask, sysBcastAddr,
|
|
-- defaultGatewayAddr, and ipConfigProtocol
|
|
-- are deprecated by ipHostTable. Jan/1997.
|
|
--
|
|
-- The 'deprecated' status indicates that the object is
|
|
-- obsolete, but that an implementor may wish to support that
|
|
-- those objects to foster interoperability with older
|
|
-- implementations.
|
|
--
|
|
|
|
sysAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The system's IP address. The current operational IP
|
|
address may be obtained by the ipAdEntAddr entry in the
|
|
ipAddrTable. This parameter will take effect only after
|
|
a reset is issued."
|
|
::= { sysIpProtocol 1 }
|
|
|
|
sysNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The system's IP subnet mask. The current operational IP
|
|
subnet mask may be obtained by the ipAdEntNetMask entry in
|
|
the ipAddrTable. This parameter will take effect only after
|
|
a reset is issued. The parameter is not saved unless
|
|
written to flash."
|
|
::= { sysIpProtocol 2 }
|
|
|
|
sysBcastAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The system's IP broadcast address. The current operational
|
|
IP broadcast address may be obtained by the ipAdEntBcastAddr
|
|
in the ipAddrTable. This parameter will take effect only after
|
|
a reset is issued. This parameter is not saved unless written
|
|
to flash."
|
|
::= { sysIpProtocol 3 }
|
|
|
|
defaultGatewayAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The system's default getway IP address. the current
|
|
operational default gateway's IP address can be obtained from
|
|
the ipRoutingTable. This parameter will take effect only
|
|
after a reset is issued. This parameter is not saved unless
|
|
written to flash."
|
|
::= { sysIpProtocol 4 }
|
|
|
|
configServerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP address to which the requests for configuration
|
|
files are sent. The protocol used to retrieve the
|
|
configuration is determined by the configProtocol object.
|
|
This parameter may be set dynamically as established by the
|
|
ipConfigProtocol object."
|
|
::= { sysIpProtocol 5 }
|
|
|
|
ipConfigProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flash(1), -- IP information obtained via flash
|
|
bootp(2) -- IP information obtained via BootP
|
|
}
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The protocol used to obtain this IP
|
|
addressing information."
|
|
::= { sysIpProtocol 6 }
|
|
|
|
|
|
ipHostNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of IP entities (regardless of
|
|
their current state) present on this system."
|
|
::= { sysIpProtocol 7 }
|
|
|
|
|
|
ipHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpHostEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains all the ip entities this
|
|
agent manages. The number of entries is
|
|
given by the value of ipHostNumber."
|
|
::= { sysIpProtocol 8 }
|
|
|
|
|
|
ipHostEntry OBJECT-TYPE
|
|
SYNTAX IpHostEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An IP entity entry containing objects
|
|
regarding this IP entity."
|
|
|
|
INDEX { ipHostIndex }
|
|
::= { ipHostTable 1 }
|
|
|
|
IpHostEntry ::=
|
|
SEQUENCE {
|
|
ipHostIndex
|
|
INTEGER,
|
|
ipHostAddress
|
|
IpAddress,
|
|
ipHostNetMask
|
|
IpAddress,
|
|
ipHostBcastAddr
|
|
IpAddress,
|
|
ipHostDefaultGatewayAddr
|
|
IpAddress,
|
|
ipHostConfigProtocol
|
|
INTEGER,
|
|
ipHostEnable
|
|
INTEGER,
|
|
ipHostType
|
|
INTEGER
|
|
}
|
|
|
|
|
|
ipHostIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An index to the ipHostTable. Its value ranges
|
|
between 1 and the value of ipHostNumber."
|
|
|
|
::= { ipHostEntry 1 }
|
|
|
|
|
|
ipHostAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP address of this entity."
|
|
::= { ipHostEntry 2 }
|
|
|
|
|
|
ipHostNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The subnet mask associated with the Ip
|
|
address of this entry."
|
|
::= { ipHostEntry 3 }
|
|
|
|
ipHostBcastAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Broadcast address associated with the
|
|
IP address of this entry."
|
|
::= { ipHostEntry 4 }
|
|
|
|
ipHostDefaultGatewayAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The gateway address associated with the IP address of
|
|
this entry."
|
|
::= { ipHostEntry 5 }
|
|
|
|
ipHostConfigProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
flash(1), --this Ip information obtained via flash.
|
|
bootp(2) --this IP information obtained via BootP.
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The protocol used to obtain this IP
|
|
host's addressing information."
|
|
::= { ipHostEntry 6 }
|
|
|
|
|
|
ipHostEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or disable of this ip host entry."
|
|
::= { ipHostEntry 7 }
|
|
|
|
|
|
ipHostType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(1),
|
|
secondary(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A read only object indicating the type of
|
|
this IP entity. "
|
|
::= { ipHostEntry 8}
|
|
|
|
|
|
|
|
-- SECTION 6: TFTP Protocol Group
|
|
--
|
|
-- Implementation of the sysTFTP group is mandatory for all agent
|
|
-- products that support TFTP file transfers.
|
|
--
|
|
-- The sysTFTP Group is used by a station to initiate a TFTP transfer
|
|
-- from a TFTP server to this system (the TFTP client).
|
|
--
|
|
-- In order to initiate a TFTP file transfer, the client must know
|
|
-- the following information:
|
|
--
|
|
-- 1. The operation to perform, either a get or a put (sysTFTPStart).
|
|
-- 2. What station is acting as the TFTP server (sysTFTPIpAddress).
|
|
-- 3. The file name (sysTFTPFileName) and the file type (sysTFTPFileType).
|
|
-- The file name can be a pathname. The file type indicates to
|
|
-- the agent what kind of information is being transferred.
|
|
-- 4. What module should receive the file (sysTFTPSlot).
|
|
--
|
|
--
|
|
-- For example, if one wished to inband download flash code to this agent,
|
|
-- one would set:
|
|
--
|
|
-- File type = Flash code
|
|
-- File name = Pathname on the server where the file is located.
|
|
-- IP Address = The IP of the TFTP file server.
|
|
-- TFTP Start = get - retrieve the file from the server.
|
|
--
|
|
-- After setting the start object, the transfer takes place. The
|
|
-- sysTFTPResult object contains the result of the last TFTP transfer
|
|
-- attempted.
|
|
--
|
|
|
|
sysTFTPStart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tftpNoTransfer(1),
|
|
tftpGet(2), -- download to agent
|
|
tftpPut(3) -- upload to server
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting sysTFTPStart to tftpGet(2) initiates a file
|
|
transfer to the agent (download); tftpPut(3) initiates
|
|
a file transfer to the server (upload)."
|
|
::= { sysTFTPGroup 1 }
|
|
|
|
sysTFTPIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP Address of the TFTP server."
|
|
::= { sysTFTPGroup 2 }
|
|
|
|
sysTFTPFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The file name of the file to retrieve (tftpGet), or the
|
|
name of the file to create (tftpPut). "
|
|
::= { sysTFTPGroup 3 }
|
|
|
|
|
|
sysTFTPFileType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
configuration(1),
|
|
imageCode(2)
|
|
-- bootCode(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of file image to upload/download. The file
|
|
type indicates to the agent what kind of file it is
|
|
receiving. configuration(1) indicates an update of the
|
|
system configuration. imageCode(2) indicates a code upgrade of
|
|
the operational proms. bootCode(3) indicates a code
|
|
upgrade of the boot proms."
|
|
::= { sysTFTPGroup 4 }
|
|
|
|
|
|
sysTFTPResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
clear(1), --not initialized
|
|
xferInProgress(2),
|
|
okay(3),
|
|
otherTFTPError(4),
|
|
fileNotFound(5), -- check for valid file name
|
|
accessError(6),
|
|
diskFull(7), -- server disk is full
|
|
illegalTFTPOperation(8),
|
|
invalidTFTPTransactionID(9),
|
|
fileExists(10), -- file already exists
|
|
noSuchUser(11), -- no such user
|
|
noResources(12), -- no resources to start
|
|
noResponse(13), -- check valid server IP address
|
|
flashError(14), -- flash programming error
|
|
configMismatch(15), -- configuration mismatch
|
|
configChecksumError(16) -- configuration checksum error
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The result of the last TFTP operation."
|
|
::= { sysTFTPGroup 5 }
|
|
|
|
|
|
-- SECTION 7: SNMP Group
|
|
--
|
|
-- The objects in this groups allow a management station control of the
|
|
-- SNMP elements of the system.
|
|
--
|
|
|
|
sysSNMPGetCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..30))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The system get community string."
|
|
::= { sysSNMPGroup 1 }
|
|
|
|
sysSNMPSetCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..30))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The system set community string."
|
|
::= { sysSNMPGroup 2 }
|
|
|
|
sysSNMPEnableTraps OBJECT-TYPE
|
|
SYNTAX EnableIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is permitted
|
|
to generate traps. This object provides global trap
|
|
enable status, as specific traps may be enabled or disabled
|
|
on an individual basis."
|
|
::= { sysSNMPGroup 3 }
|
|
|
|
sysSNMPTrapIPReceiverTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SysSNMPTrapIPReceiverEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing of network management stations that are
|
|
to receive traps generated by the system."
|
|
::= { sysSNMPGroup 4 }
|
|
|
|
sysSNMPTrapIPReceiverEntry OBJECT-TYPE
|
|
SYNTAX SysSNMPTrapIPReceiverEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A destination address and community string to a particular
|
|
IP trap server. Entries are created by supplying a valid IP
|
|
address of the trap server."
|
|
INDEX { trapIPRcvrAddress }
|
|
::= { sysSNMPTrapIPReceiverTable 1 }
|
|
|
|
SysSNMPTrapIPReceiverEntry ::= SEQUENCE {
|
|
trapIPRcvrAddress
|
|
IpAddress,
|
|
trapIPRcvrStatus
|
|
StatusIndicator,
|
|
trapIPRcvrCommunity
|
|
DisplayString
|
|
}
|
|
|
|
trapIPRcvrAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP network address of the network management entity
|
|
which will receive traps."
|
|
::= { sysSNMPTrapIPReceiverEntry 1 }
|
|
|
|
trapIPRcvrStatus OBJECT-TYPE
|
|
SYNTAX StatusIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this object to the value invalid(2) has the effect
|
|
of invalidating the corresponding entry in the
|
|
sysSNMPReceiverTrapTable. On a read, the value of valid(2)
|
|
is returned. Entries are added into the table by specifying
|
|
a previously unknown trapRcvrNetAddress, along with the
|
|
corresponding trapRcvrCommunity."
|
|
::= { sysSNMPTrapIPReceiverEntry 2 }
|
|
|
|
trapIPRcvrCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The community string to use for traps sent to this trap
|
|
receiver."
|
|
::= { sysSNMPTrapIPReceiverEntry 3 }
|
|
|
|
sysMgmtRingNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique ring number assigned to the system's managment
|
|
entity. This ring will not appear as a source-route hop
|
|
as it is seen only in frames destined to or sourced from
|
|
the system management entity."
|
|
::= { sysConfig 20 }
|
|
|
|
--
|
|
-- The NetBIOS Group
|
|
--
|
|
-- This group contains NetBIOS information on a system wide basis.
|
|
|
|
netbiosNameTableAgingTimer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The non-zero timeout period in seconds for aging out
|
|
dynamically learned Netbios names. The default value
|
|
is 300 seconds."
|
|
::= { netbiosGroup 1 }
|
|
|
|
netbiosNameQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time period in hundreds of milliseconds in which
|
|
NetBIOS name queries are allowed to be bridged. A value of
|
|
0 disables briding NetBIOS name queries. The default value
|
|
is 5 (a half second)."
|
|
::= { netbiosGroup 2 }
|
|
|
|
netbiosNameTableFlush OBJECT-TYPE
|
|
SYNTAX BitField
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If set, indicates that the NetBIOS name table should be
|
|
flushed. Flushing the table removes all of the dynamically
|
|
learned entries from the NetBIOS name table. When read,
|
|
this object always returns a value of clear."
|
|
::= { netbiosGroup 3 }
|
|
|
|
netbiosNameTableEntry OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NetbiosNameEntry
|
|
ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A NetBIOS name table. This table is a list of the NetBIOS
|
|
names learned or configured on the switch."
|
|
::= { netbiosGroup 4 }
|
|
|
|
netbiosNameEntry OBJECT-TYPE
|
|
SYNTAX NetbiosNameEntry
|
|
ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A NetBIOS name table entry. Entries may be deleted by
|
|
setting the status object to invalid (2). Entries are added
|
|
by specifying the name, station and ring or card/port as
|
|
appropriate."
|
|
INDEX { netbiosNameName }
|
|
::= { netbiosNameTableEntry 1 }
|
|
|
|
NetbiosNameEntry ::= SEQUENCE {
|
|
netbiosNameName
|
|
DisplayString,
|
|
netbiosNameStatus
|
|
StatusIndicator,
|
|
netbiosNameStationAddress
|
|
PhysAddress,
|
|
netbiosNameVirtualRingNumber
|
|
INTEGER,
|
|
netbiosNameCardNumber
|
|
INTEGER,
|
|
netbiosNamePortNumber
|
|
INTEGER,
|
|
netbiosNamePortType
|
|
INTEGER,
|
|
netbiosNameAge
|
|
TimeTicks,
|
|
netbiosNameProxies
|
|
Counter,
|
|
netbiosNameSuppressedQueries
|
|
Counter
|
|
}
|
|
|
|
netbiosNameName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(15))
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The NetBIOS name."
|
|
::= { netbiosNameEntry 1 }
|
|
|
|
netbiosNameStatus OBJECT-TYPE
|
|
SYNTAX StatusIndicator
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The status of the NetBIOS name entry. Setting this object to
|
|
invalid (2) causes the entry to be deleted from the name
|
|
table. The value should always be read as valid(1)."
|
|
::= { netbiosNameEntry 2 }
|
|
|
|
netbiosNameStationAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress (SIZE(6))
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The address of the station from which this name was
|
|
learned or configured. This object must be specified when
|
|
adding an entry into the table."
|
|
::= { netbiosNameEntry 3 }
|
|
|
|
netbiosNameVirtualRingNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The virtual ring number from which the entry was learned or
|
|
configured. If the switch is operating is a mode where
|
|
virtual rings are invalid, then this number will be 0. This
|
|
object must be specified when adding an entry in the table
|
|
if appropriate."
|
|
::= { netbiosNameEntry 4 }
|
|
|
|
netbiosNameCardNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The card number from which the entry was learned or
|
|
configured. If the switch is operating is a mode where
|
|
virtual rings are valid, then this number will be 0. This
|
|
object must be specified when adding an entry in the table
|
|
if appropriate."
|
|
::= { netbiosNameEntry 5 }
|
|
|
|
netbiosNamePortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The port number from which the entry was learned or
|
|
configured. If the switch is operating is a mode where
|
|
virtual rings are valid, then this number will be 0. This
|
|
object must be specified when adding an entry in the table
|
|
if appropriate."
|
|
::= { netbiosNameEntry 6 }
|
|
|
|
netbiosNamePortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
token-ring(2),
|
|
fddi(3),
|
|
ethernet(4),
|
|
atm(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The type of port from which the entry was learned or
|
|
configured."
|
|
::= { netbiosNameEntry 7 }
|
|
|
|
netbiosNameAge OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The amount of time (in hundredths of a second) before
|
|
this entry is aged, or the elapsed time since the
|
|
entry was learned or configured."
|
|
::= { netbiosNameEntry 8 }
|
|
|
|
netbiosNameProxies OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of times that the switch has proxied for
|
|
this station."
|
|
::= { netbiosNameEntry 9 }
|
|
|
|
netbiosNameSuppressedQueries OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of NetBIOS name queries from this station
|
|
which were suppressed by the switch due to the configured
|
|
name query interval (netbiosNameQueryInterval)"
|
|
::= { netbiosNameEntry 10 }
|
|
|
|
cnnetbiosNameTableEntry OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CnnetbiosNameEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A NetBIOS name table with VLAN information. This table is
|
|
a list of the NetBIOS
|
|
names learned or configured on the switch."
|
|
::= { netbiosGroup 5 }
|
|
|
|
cnnetbiosNameEntry OBJECT-TYPE
|
|
SYNTAX CnnetbiosNameEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A NetBIOS name table entry. Entries may be deleted by
|
|
setting the status object to invalid (2). Entries are added
|
|
by specifying the name, station, ring or card/port, vlan
|
|
id as appropriate."
|
|
INDEX { cnnetbiosNameVlanId, cnnetbiosNameName }
|
|
::= { cnnetbiosNameTableEntry 1 }
|
|
|
|
CnnetbiosNameEntry ::= SEQUENCE {
|
|
cnnetbiosNameName
|
|
DisplayString,
|
|
cnnetbiosNameStatus
|
|
StatusIndicator,
|
|
cnnetbiosNameStationAddress
|
|
PhysAddress,
|
|
cnnetbiosNameVirtualRingNumber
|
|
INTEGER,
|
|
cnnetbiosNameCardNumber
|
|
INTEGER,
|
|
cnnetbiosNamePortNumber
|
|
INTEGER,
|
|
cnnetbiosNameVlanId
|
|
VlanId,
|
|
cnnetbiosNamePortType
|
|
INTEGER,
|
|
cnnetbiosNameAge
|
|
TimeTicks,
|
|
cnnetbiosNameProxies
|
|
Counter,
|
|
cnnetbiosNameSuppressedQueries
|
|
Counter
|
|
}
|
|
|
|
cnnetbiosNameName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(15))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The NetBIOS name."
|
|
::= { cnnetbiosNameEntry 1 }
|
|
|
|
cnnetbiosNameStatus OBJECT-TYPE
|
|
SYNTAX StatusIndicator
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of the NetBIOS name entry. Setting this object to
|
|
invalid (2) causes the entry to be deleted from the name
|
|
table. The value should always be read as valid(1)."
|
|
::= { cnnetbiosNameEntry 2 }
|
|
|
|
cnnetbiosNameStationAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress (SIZE(6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The address of the station from which this name was
|
|
learned or configured. This object must be specified when
|
|
adding an entry into the table."
|
|
::= { cnnetbiosNameEntry 3 }
|
|
|
|
cnnetbiosNameVirtualRingNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The virtual ring number from which the entry was learned or
|
|
configured. If the switch is operating is a mode where
|
|
virtual rings are invalid, then this number will be 0. This
|
|
object must be specified when adding an entry in the table
|
|
if appropriate."
|
|
::= { cnnetbiosNameEntry 4 }
|
|
|
|
cnnetbiosNameCardNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The card number from which the entry was learned or
|
|
configured. If the switch is operating is a mode where
|
|
virtual rings are valid, then this number will be 0. This
|
|
object must be specified when adding an entry in the table
|
|
if appropriate."
|
|
::= { cnnetbiosNameEntry 5 }
|
|
|
|
cnnetbiosNamePortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port number from which the entry was learned or
|
|
configured. If the switch is operating is a mode where
|
|
virtual rings are valid, then this number will be 0. This
|
|
object must be specified when adding an entry in the table
|
|
if appropriate."
|
|
::= { cnnetbiosNameEntry 6 }
|
|
|
|
cnnetbiosNameVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The 802.1q vid for the VLan from which the entry was
|
|
learned or configured. This object must be specified
|
|
when adding an entry in the table if appropriate."
|
|
::= { cnnetbiosNameEntry 7 }
|
|
|
|
cnnetbiosNamePortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
token-ring(2),
|
|
fddi(3),
|
|
ethernet(4),
|
|
atm(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of port from which the entry was learned or
|
|
configured."
|
|
::= { cnnetbiosNameEntry 8 }
|
|
|
|
cnnetbiosNameAge OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of time (in hundredths of a second) before
|
|
this entry is aged, or the elapsed time since the
|
|
entry was learned or configured."
|
|
::= { cnnetbiosNameEntry 9 }
|
|
|
|
cnnetbiosNameProxies OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times that the switch has proxied for
|
|
this station."
|
|
::= { cnnetbiosNameEntry 10 }
|
|
|
|
cnnetbiosNameSuppressedQueries OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of NetBIOS name queries from this station
|
|
which were suppressed by the switch due to the configured
|
|
name query interval (netbiosNameQueryInterval)"
|
|
::= { cnnetbiosNameEntry 11 }
|
|
|
|
|
|
--
|
|
-- The LAN Network Manager (LNM) Group
|
|
--
|
|
-- This group contains LAN Network Manager information on a system wide basis.
|
|
|
|
lnmOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
other(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This object reflects the actual
|
|
state of LNM which may differ
|
|
from that of the lnmAdminStatus
|
|
object. This can occur when
|
|
the LNM task has failed but the
|
|
the corresponding lnmAdminStatus
|
|
is 'up'."
|
|
::= { lnmGroup 1 }
|
|
|
|
lnmAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The desired state of the LNM on
|
|
the switch as prescribed by the
|
|
operator. The actions of the agent
|
|
will, if at all possible, eventually
|
|
result in the desired state being
|
|
reflected in the lnmOperStatus."
|
|
DEFVAL { down }
|
|
::= { lnmGroup 2 }
|
|
|
|
lnmBridgeGroupDisplayMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
aggregate(1),
|
|
separate(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates how LNM should display
|
|
spanning tree groups. If set to aggregate,
|
|
LNM displays all spanning tree groups as
|
|
one internal management ring.
|
|
If set to separate, LNM displays
|
|
each spanning tree group as a separate
|
|
internal management ring."
|
|
DEFVAL { aggregate }
|
|
::= { lnmGroup 3 }
|
|
|
|
lnmLinkPassword OBJECT-TYPE
|
|
SYNTAX EnableIndicator
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the use of the default LNM management
|
|
password or the first 6 to 8 characters of the
|
|
system password."
|
|
::= { lnmGroup 4 }
|
|
END
|