mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
02b3530f38
git-svn-id: http://www.observium.org/svn/observer/trunk@1575 61d68cd4-352d-0410-923a-c4978735b2b8
1678 lines
39 KiB
Plaintext
1678 lines
39 KiB
Plaintext
CTRON-BDG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- ctron-bdg-mib.txt
|
|
-- Part Number: 2170561-01
|
|
-- Revision: 1.01.01
|
|
-- Date: June 22, 1996
|
|
|
|
-- Cabletron Systems, Inc.
|
|
-- 35 Industrial Way, P.O. Box 5005
|
|
-- Rochester, NH 03867-0505
|
|
-- (603) 332-9400
|
|
-- support@ctron.com
|
|
|
|
-- This module provides authoritative definitions for Cabletron's
|
|
-- enterprise-specific common MIB.
|
|
--
|
|
-- This module will be extended, as required.
|
|
--
|
|
|
|
-- Cabletron Systems reserves the right to make changes in
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Cabletron Systems
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Cabletron Systems be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Cabletron
|
|
-- Systems has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
--
|
|
-- Cabletron grants vendors, end-users, and other interested parties
|
|
-- a non-exclusive license to use this Specification in connection
|
|
-- with the management of Cabletron products.
|
|
|
|
-- Copyright August 95 Cabletron Systems
|
|
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE FROM RFC-1212
|
|
bridge, layerMgmt
|
|
FROM IRM-OIDS
|
|
Counter FROM RFC1155-SMI;
|
|
|
|
|
|
bridgeRev1 OBJECT IDENTIFIER ::= { bridge 1 }
|
|
bdgdevice OBJECT IDENTIFIER ::= { bridgeRev1 1 }
|
|
|
|
bdgPort OBJECT IDENTIFIER ::= { bridgeRev1 2 }
|
|
|
|
filterDB OBJECT IDENTIFIER ::= { bridgeRev1 3 }
|
|
|
|
trapTypes OBJECT IDENTIFIER ::= { bridgeRev1 4 }
|
|
|
|
bdgTables OBJECT IDENTIFIER ::= { bridgeRev1 5 }
|
|
|
|
acqDB OBJECT IDENTIFIER ::= { filterDB 1 }
|
|
|
|
permDB OBJECT IDENTIFIER ::= { filterDB 2 }
|
|
|
|
specialDB OBJECT IDENTIFIER ::= { filterDB 3 }
|
|
|
|
acqStats OBJECT IDENTIFIER ::= { acqDB 1 }
|
|
|
|
acqOptions OBJECT IDENTIFIER ::= { acqDB 2 }
|
|
|
|
permStats OBJECT IDENTIFIER ::= { permDB 1 }
|
|
|
|
permOptions OBJECT IDENTIFIER ::= { permDB 2 }
|
|
|
|
specStats OBJECT IDENTIFIER ::= { specialDB 1 }
|
|
|
|
specFilters OBJECT IDENTIFIER ::= { specialDB 2 }
|
|
|
|
|
|
-- Device Object Definitions
|
|
--
|
|
-- This section defines the objects under the Device node.
|
|
--
|
|
-- Instance Identifiers for Device Objects
|
|
--
|
|
-- There is only one instance of a Device object, thus the Instance
|
|
-- Identifier is 0.
|
|
--
|
|
-- Device Objects
|
|
|
|
|
|
bdgdeviceDisableBdg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disableBridge (0),
|
|
enableBridge (1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates if the bridge will be disabled."
|
|
::= { bdgdevice 1 }
|
|
|
|
|
|
bdgdeviceRestoreSettings OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
restoreSettings (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Restore the following settings to their default values:
|
|
Bridge Name to ETHERNET_BRIDGE,
|
|
Location to LOCAL,
|
|
Port 1 Name to PORT_1,
|
|
Port 2 Name to PORT_2,
|
|
Port 1 Network Name to LAN_1,
|
|
Port 2 Network Name to LAN_2,
|
|
Ageing Time for Acquired Database to 300 seconds,
|
|
Erase the acquired database,
|
|
Erase the permanent database,
|
|
Place sixteen default multicast addresses into
|
|
the permanent and acquired databases,
|
|
Type of Spanning Tree to 802.1,
|
|
Type of Filtering to IEEE 802.1,
|
|
Bridge Max Age to 20 seconds,
|
|
Bridge Forward Delay to 15 seconds,
|
|
Bridge Hello Time to 2 seconds,
|
|
Bridge Priority to 8000,
|
|
Port 1 Priority to 80,
|
|
Port 2 Priority to 80,
|
|
Port 1 Path Cost to 100,
|
|
Port 2 Path Cost to 100,
|
|
Restart the bridge."
|
|
::= { bdgdevice 2 }
|
|
|
|
|
|
bdgdeviceBdgName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The user-defined name (up to 32 characters long) of the bridge.
|
|
The default bridge name is ETHERNET_BRIDGE."
|
|
::= { bdgdevice 4 }
|
|
|
|
|
|
bdgdeviceNumPorts OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ports present on the bridge."
|
|
::= { bdgdevice 5 }
|
|
|
|
|
|
bdgdeviceType OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of bridge, NB25E, IRBM, or NB20E."
|
|
::= { bdgdevice 6 }
|
|
|
|
|
|
bdgdeviceVersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The release version of the firmware installed in the bridge."
|
|
::= { bdgdevice 7 }
|
|
|
|
|
|
bdgdeviceLocation OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The user-defined name to indicate the location of the bridge on
|
|
the network. The default location name is LOCAL."
|
|
::= { bdgdevice 8 }
|
|
|
|
|
|
bdgdeviceStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of the bridge, ON-LINE, STAND BY or DISABLED."
|
|
::= { bdgdevice 9 }
|
|
|
|
|
|
bdgdeviceRestartBdg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
restartBridge (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Force the bridge to undergo a software reset."
|
|
::= { bdgdevice 10 }
|
|
|
|
|
|
bdgdeviceFrFwd OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames forwarded by the bridge."
|
|
::= { bdgdevice 11 }
|
|
|
|
|
|
bdgdeviceFrRx OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames received by the bridge."
|
|
::= { bdgdevice 12 }
|
|
|
|
|
|
bdgdeviceFrFlt OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames filtered by the bridge."
|
|
::= { bdgdevice 13 }
|
|
|
|
|
|
bdgdeviceErr OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of network errors that have occurred."
|
|
::= { bdgdevice 14 }
|
|
|
|
|
|
bdgdeviceSwitchSetting OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current switch settings read from the bridge
|
|
hardware."
|
|
::= { bdgdevice 15 }
|
|
|
|
|
|
bdgdeviceNumRestarts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times the bridge has been powered up or restarted."
|
|
::= { bdgdevice 16 }
|
|
|
|
|
|
bdgdeviceTypeFiltering OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ieee8021 (0),
|
|
specialDB (1),
|
|
both (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of filtering to be performed by the bridge. The default
|
|
is IEEE 802.1."
|
|
::= { bdgdevice 17 }
|
|
|
|
|
|
bdgdeviceSTAProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ieee8021 (0),
|
|
dec (1),
|
|
none (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The spanning tree algorithm under which the bridge is operating.
|
|
The selections are as follows:
|
|
- IEEE 802.1 compliant spanning tree algorithm
|
|
environment (802.1)
|
|
- DEC LAN Bridge 100 environment (DEC)
|
|
- Without the spanning tree algorithm enabled (NONE)
|
|
The default is 802.1."
|
|
::= { bdgdevice 18 }
|
|
|
|
|
|
bdgdeviceBridgeID OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique identifier of the bridge. The first two bytes of the
|
|
identifier are the bridge priority and the last six bytes are the
|
|
Ethernet address."
|
|
::= { bdgdevice 19 }
|
|
|
|
|
|
bdgdeviceTopChgCnt OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times the bridge's Topology Change Flag has been
|
|
changed since the bridge was powered up or initialized."
|
|
::= { bdgdevice 20 }
|
|
|
|
|
|
bdgdeviceRootCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The cost of the path to the root from this bridge."
|
|
::= { bdgdevice 21 }
|
|
|
|
|
|
bdgdeviceRootPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port identifier for the port which offers the lowest cost
|
|
path to the root, i.e. that port for which the sum of the values
|
|
of the designated cost and path cost parameters held for the port
|
|
is lowest."
|
|
::= { bdgdevice 22 }
|
|
|
|
|
|
bdgdeviceHelloTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time interval between the transmission of Configuration
|
|
BPDU's by a bridge which is attempting to become the root or is
|
|
the root."
|
|
::= { bdgdevice 23 }
|
|
|
|
|
|
bdgdeviceBdgMaxAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the Max Age parameter when the bridge is the root
|
|
or is attempting to become the root. A time of 6 to 40 seconds is
|
|
allowed. The default is 20 seconds."
|
|
::= { bdgdevice 24 }
|
|
|
|
|
|
bdgdeviceBdgFwdDly OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the forward delay parameter when the bridge is the
|
|
root or is attempting to become the root. A time of 4 to 30
|
|
seconds is allowed."
|
|
::= { bdgdevice 25 }
|
|
|
|
|
|
bdgdeviceTimeTopChg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time in seconds that has elapsed since the bridge's Topology
|
|
Change Flag last recorded the value of a topology change."
|
|
::= { bdgdevice 26 }
|
|
|
|
|
|
bdgdeviceTopChg OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noTopologyChangeInProgress (0),
|
|
topologyChangeInProgress (1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates if a bridge topology change is in progress."
|
|
::= { bdgdevice 27 }
|
|
|
|
|
|
bdgdeviceDesigRoot OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique identifier of the bridge recorded as the root."
|
|
::= { bdgdevice 28 }
|
|
|
|
|
|
bdgdeviceMaxAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum age of received protocol information before it is
|
|
discarded."
|
|
::= { bdgdevice 29 }
|
|
|
|
|
|
bdgdeviceHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The minimum time period elapsing between the transmission of
|
|
configuration BPDU's through a given bridge port."
|
|
::= { bdgdevice 30 }
|
|
|
|
|
|
bdgdeviceFwdDly OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time spent in the listening state while moving from the
|
|
blocking state to the learning state, or the time spent in the
|
|
learning state while moving from the listening state to the
|
|
forwarding state."
|
|
::= { bdgdevice 31 }
|
|
|
|
|
|
bdgdeviceBdgHello OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the Hello Time parameter when the bridge is the
|
|
root or is attempting to become the root. A time of 1 to 10
|
|
seconds is allowed. The default is 2 seconds."
|
|
::= { bdgdevice 32 }
|
|
|
|
|
|
bdgdeviceBdgPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The part of the bridge address that contains the identifier used
|
|
in the spanning tree for priority comparisons. Allowed range is 0
|
|
through FFFF. The default is 8000."
|
|
::= { bdgdevice 33 }
|
|
|
|
|
|
bdgdeviceResetCounts OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
resetCounts (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reset all counters to zero."
|
|
::= { bdgdevice 34 }
|
|
|
|
|
|
bdgdeviceUptime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time, in seconds, that has elapsed since the bridge was last
|
|
reset or initialized."
|
|
::= { bdgdevice 35 }
|
|
|
|
|
|
bdgdeviceTrapType OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the object identifier of the first VarBinding in the
|
|
last trap generated by the bridge."
|
|
::= { bdgdevice 36 }
|
|
|
|
|
|
-- Port Object Definitions
|
|
--
|
|
-- This section defines the objects under the Port node.
|
|
--
|
|
-- Instance Identifiers for Port Objects
|
|
--
|
|
-- The Instance Identifier for port objects is the number of the port on
|
|
-- the bridge. Valid instance identifiers for the ports on the IRBM,
|
|
-- NB25E, and NB20E bridges are 1 and 2.
|
|
--
|
|
-- Port Objects
|
|
|
|
|
|
bdgPortAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Ethernet address of the port."
|
|
::= { bdgPort 1 }
|
|
|
|
bdgPortName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The user-defined name assigned to the port. The default port 1
|
|
name is PORT_1 and the default Port 2 name is PORT_2."
|
|
::= { bdgPort 2 }
|
|
|
|
bdgPortType OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IEEE specification the port meets, e.g. 802.3."
|
|
::= { bdgPort 3 }
|
|
|
|
bdgPortStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status in which the port is operating. The status messages
|
|
for Ports 1 and 2 are:
|
|
|
|
OFF - The port is off, due to a failed network interface
|
|
chip associated with that port.
|
|
|
|
OK/SQE ON - The port is communicating with the network
|
|
and the transceiver making the connection to the network
|
|
has SQE enabled.
|
|
|
|
OK/SQE OFF - The port is communicating with the network
|
|
and the transceiver making the connection to the network
|
|
has SQE disabled.
|
|
|
|
CARRIER LOST - Communication with the network has not
|
|
been established or has been lost."
|
|
::= { bdgPort 4 }
|
|
|
|
bdgPortNetName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The user-defined name assigned to a network segment connected to
|
|
the port. The default network name for Port 1 is LAN_1 and the
|
|
default network name for Port 2 is LAN_2."
|
|
::= { bdgPort 5 }
|
|
|
|
bdgPortFrRx OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames received at the specified port."
|
|
::= { bdgPort 6 }
|
|
|
|
bdgPortDisInb OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of valid frames that were received at the port
|
|
but then discarded by the bridge in the forwarding process."
|
|
::= { bdgPort 7 }
|
|
|
|
bdgPortFwdOutb OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames forwarded successfully to the appropriate
|
|
port."
|
|
::= { bdgPort 8 }
|
|
|
|
bdgPortDisLOB OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets that were discarded by the bridge because
|
|
of a lack of buffer space to maintain the data."
|
|
::= { bdgPort 9 }
|
|
|
|
bdgPortDisTDE OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames that were intended for forwarding but were
|
|
discarded when the maximum time period set for transmission was
|
|
exceeded before forwarding was possible."
|
|
::= { bdgPort 10 }
|
|
|
|
bdgPortDisErr OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames that could not be transmitted because the
|
|
frame was too large for the attached network (1526 bytes,
|
|
including preamble, for 802.3 networks)."
|
|
::= { bdgPort 11 }
|
|
|
|
bdgPortColl OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of collisions that have occurred on the network at
|
|
the specified port."
|
|
::= { bdgPort 12 }
|
|
|
|
bdgPortTxAbrt OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of transmissions that have been aborted due to
|
|
excessive collisions (over 16 attempts to transmit the same
|
|
packet)."
|
|
::= { bdgPort 13 }
|
|
|
|
bdgPortOowColl OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of collisions out of the standard collision window
|
|
(51.2 uS). This indicates a network problem."
|
|
::= { bdgPort 14 }
|
|
|
|
bdgPortCRCErr OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets detected with Cyclical Redundancy Check
|
|
failures."
|
|
::= { bdgPort 15 }
|
|
|
|
bdgPortFrAlErr OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of errors due to misaligned packets."
|
|
::= { bdgPort 16 }
|
|
|
|
bdgPortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The part of the port identifier which is used with the spanning
|
|
tree algorithm when determining which port in a LAN segment has
|
|
priority. The default is 80."
|
|
::= { bdgPort 17 }
|
|
|
|
bdgPortState OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current state of the port, DISABLED, LISTENING, LEARNING,
|
|
FORWARDING or BLOCKING."
|
|
::= { bdgPort 18 }
|
|
|
|
bdgPortPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The contributory cost of the applicable port to the overall cost
|
|
of the path when the specified port is the root port. Allowable
|
|
range is 1 to 65535. The default is 100."
|
|
::= { bdgPort 19 }
|
|
|
|
bdgPortDesigCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The cost of the path of this port to the root bridge on the
|
|
network."
|
|
::= { bdgPort 20 }
|
|
|
|
bdgPortDesigBrdg OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The network address of the bridge that is assumed to be the root
|
|
bridge on the network."
|
|
::= { bdgPort 21 }
|
|
|
|
bdgPortDesigPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port identifier of the bridge port believed to be the
|
|
designated port for the LAN associated with the port."
|
|
::= { bdgPort 22 }
|
|
|
|
bdgPortTopChgAck OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noTopologyChangeIsOccurring (0),
|
|
topologyChangeIsOccurring (1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the topology change acknowledgement flag in the
|
|
next configuration BPDU to be transmitted on the associated port."
|
|
::= { bdgPort 23 }
|
|
|
|
bdgPortDesigRoot OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique bridge identifier of the bridge that is assumed to be
|
|
the root bridge on the network."
|
|
::= { bdgPort 24 }
|
|
|
|
bdgPortRuntPackets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets received at the indicated bdgPort that were
|
|
less than the IEEE 802.3 minimum Ethernet frame size of 64 bytes."
|
|
::= { bdgPort 25 }
|
|
|
|
bdgPortOversizePackets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets received at the indicated port that were
|
|
greater than the IEEE 802.3 maximum Ethernet frame size of 1518
|
|
bytes."
|
|
::= { bdgPort 26 }
|
|
|
|
bdgPortFrFilt OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames received at the indicated port that were
|
|
filtered by the bridge."
|
|
::= { bdgPort 27 }
|
|
|
|
|
|
-- Acquired Database Statistical Object Definitions
|
|
--
|
|
-- This section defines the objects under the Acquired Database
|
|
-- Statistics node.
|
|
--
|
|
-- Instance Identifiers for Acquired Database Statistical Objects
|
|
--
|
|
-- There is only one instance of an Acquired Database Statistical object,
|
|
-- thus the Instance Identifier is 0.
|
|
--
|
|
-- Acquired Database Statistical Objects
|
|
|
|
|
|
acqTotalEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of entries in the acquired database."
|
|
::= { acqStats 1 }
|
|
|
|
acqMaxEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum number of entries allowed in the acquired database."
|
|
::= { acqStats 2 }
|
|
|
|
acqStaticEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of addresses added to the Acquired database by the
|
|
user or network manager."
|
|
::= { acqStats 3 }
|
|
|
|
acqStaticAgeTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The length of time allowed for a static entry in the Acquired
|
|
database to be inactive before it is dropped from the database.
|
|
This time is fixed at zero."
|
|
::= { acqStats 4 }
|
|
|
|
acqDynEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of entries that have been accumulated in the Acquired
|
|
database through the bridge's learning process."
|
|
::= { acqStats 5 }
|
|
|
|
acqDynAgeTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The length of time allowed for a dynamic entry in the acquired
|
|
database to be inactive before it is dropped from the database. A
|
|
time from 10 - 1,000,000 seconds is allowed. The default is 300
|
|
seconds."
|
|
::= { acqStats 6 }
|
|
|
|
acqEraseDatabase OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
eraseAcquiredDatabase (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set to zero to erase all entries in the acquired database."
|
|
::= { acqStats 7 }
|
|
|
|
|
|
-- Acquired Database Option Object Definitions
|
|
--
|
|
-- This section defines the objects under the Acquired Database
|
|
-- Option node.
|
|
--
|
|
-- Instance Identifiers for Acquired Database Option Objects
|
|
--
|
|
-- The instance identifier for the acquired database option objects is
|
|
-- the 6-byte Ethernet address of the device to be added, deleted or
|
|
-- displayed to/from the acquired database.
|
|
--
|
|
-- Acquired Database Option Objects
|
|
|
|
|
|
acqCreate00 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAcquiredEntryFilterPort1FilterPort2 (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Add an entry to the acquired database to filter packets entering
|
|
ports 1 and 2 if those packets are destined for the specified
|
|
address."
|
|
::= { acqOptions 1 }
|
|
|
|
acqCreate20 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAcquiredEntryForwardPort1FilterPort2 (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Add an entry to the acquired database to forward packets
|
|
entering port1 to port2 and filter packets entering port2 if
|
|
those packets are destined for the specified address."
|
|
::= { acqOptions 2 }
|
|
|
|
acqCreate01 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAcquiredEntryFilterPort1ForwardPort2 (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Add an entry to the acquired database to filter packets entering
|
|
port 1 and forward packets entering port 2 to port 1 if those
|
|
packets are destined for the specified address."
|
|
::= { acqOptions 3 }
|
|
|
|
acqCreate21 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAcquiredEntryForwardPort1ForwardPort2 (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Add an entry to the acquired database to forward packets
|
|
entering port 1 to port 2 and to forward packets entering port 2
|
|
to port 1 if those packets are destined for the specified
|
|
address."
|
|
::= { acqOptions 4 }
|
|
|
|
acqDelete OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deleteAcquiredEntry (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Delete an entry from the acquired database."
|
|
::= { acqOptions 5 }
|
|
|
|
acqDispType OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Display the entry type, STATIC or DYNAMIC."
|
|
::= { acqOptions 6 }
|
|
|
|
acqDispOutp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
filter (0),
|
|
relay (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The outbound port for packets entering port 1."
|
|
::= { acqOptions 7 }
|
|
|
|
acqDispOutp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
filter (0),
|
|
relay (1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The outbound port for packets entering port 2."
|
|
::= { acqOptions 8 }
|
|
|
|
acqSrcAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The source address of this acquired database entry, i.e. the
|
|
instance."
|
|
::= { acqOptions 9 }
|
|
|
|
-- Permanent Database Statistical Object Definitions
|
|
--
|
|
-- This section defines the objects under the Permanent Database
|
|
-- Statistics node.
|
|
--
|
|
-- Instance Identifiers for Permanent Database Statistical Objects
|
|
--
|
|
-- There is only one instance of an Permanent Database Statistical
|
|
-- object, thus the Instance Identifier is 0.
|
|
--
|
|
-- Permanent Database Statistical Objects
|
|
|
|
|
|
permMaxEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum number of entries allowed in the permanent database."
|
|
::= { permStats 1 }
|
|
|
|
permCurrEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of entries currently recorded in the bridge's
|
|
permanent database."
|
|
::= { permStats 2 }
|
|
|
|
permEraseDatabase OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
erasePermanentDatabase (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Erase all entries in the permanent database."
|
|
::= { permStats 3 }
|
|
|
|
-- Permanent Database Option Object Definitions
|
|
--
|
|
-- This section defines the objects under the Permanent Database
|
|
-- Option node.
|
|
--
|
|
-- Instance Identifiers for Permanent Database Option Objects
|
|
--
|
|
-- The instance identifier for the permanent database option objects is
|
|
-- the 6-byte Ethernet address of the device to be added, deleted or
|
|
-- displayed to/from the permanent database.
|
|
--
|
|
-- Permanent Database Option Objects
|
|
|
|
permCreate00 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createPermanentEntryFilterPort1FilterPort2 (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Add an entry to the permanent database to filter packets
|
|
entering ports 1 and 2 if those packets are destined for the
|
|
specified address."
|
|
::= { permOptions 1 }
|
|
|
|
permCreate20 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createPermanentEntryForwardPort1FilterPort2 (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Add an entry to the permanent database to forward packets
|
|
entering port 1 and filter packets entering port 2 if those
|
|
packets are destined for the specified address."
|
|
::= { permOptions 2 }
|
|
|
|
permCreate01 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createPermanentEntryFilterPort1ForwardPort2 (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Add an entry to the permanent database to filter packets
|
|
entering port 1 and forward packets entering port 2 if those
|
|
packets are destined for the specified address."
|
|
::= { permOptions 3 }
|
|
|
|
permCreate21 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createPermanentEntryForwardPort1ForwardPort2 (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Add an entry to the permanent database to forward packets
|
|
entering ports 1 and 2 if those packets are destined for the
|
|
specified address."
|
|
::= { permOptions 4 }
|
|
|
|
permDelete OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deletePermanentEntry (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Delete an entry from the permanent database."
|
|
::= { permOptions 5 }
|
|
|
|
permDispType OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Display the entry type, STATIC or DYNAMIC."
|
|
::= { permOptions 6 }
|
|
|
|
permDispOutp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
filter (0),
|
|
relay (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The outbound port for packets entering port 1."
|
|
::= { permOptions 7 }
|
|
|
|
permDispOutp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
filter (0),
|
|
relay (1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The outbound port for packets entering port 2."
|
|
::= { permOptions 8 }
|
|
|
|
permSrcAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The source address in this permanent database entry, i.e. the
|
|
instance."
|
|
::= { permOptions 9 }
|
|
|
|
-- Special Database Statistical Object Definitions
|
|
--
|
|
-- This section defines the objects under the Special Database
|
|
-- Statistical node.
|
|
--
|
|
-- Instance Identifiers for Special Database Statistical Objects
|
|
--
|
|
-- There is only one instance of a Special Database Statistical object,
|
|
-- thus the Instance Identifier is 0.
|
|
--
|
|
-- Special Database Statistical Objects
|
|
|
|
specNumEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of filters in the special database."
|
|
::= { specStats 1 }
|
|
|
|
specMaxEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum number of filters the special database can contain."
|
|
::= { specStats 2 }
|
|
|
|
specNextFilterNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of the next available filter that can be added to the
|
|
special database."
|
|
::= { specStats 3 }
|
|
|
|
-- Special Database Filter Object Definitions
|
|
--
|
|
-- This section defines the objects under the Special Database
|
|
-- Filter node.
|
|
--
|
|
-- Instance Identifiers for Special Database Filter Objects
|
|
--
|
|
-- The instance identifier of the special database filter objects
|
|
-- is the filter number, values from 1 through 10 are allowed.
|
|
--
|
|
-- Special Database Filter Objects
|
|
|
|
specEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disableFilter (0),
|
|
enableFilter (1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enable or disable the filter."
|
|
::= { specFilters 1 }
|
|
|
|
specPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
filter (0),
|
|
relay (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set port 1 to filter or forward packets."
|
|
::= { specFilters 2 }
|
|
|
|
specPort2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
filter (0),
|
|
relay (1)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set port 2 to filter or forward packets."
|
|
::= { specFilters 3 }
|
|
|
|
specDestAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set the special database to filter packets with a specific
|
|
destination address."
|
|
::= { specFilters 4 }
|
|
|
|
specSrcAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set the special database to filter packets with a specific
|
|
source address."
|
|
::= { specFilters 5 }
|
|
|
|
specType OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set the special database to filter packets with a specific type
|
|
field."
|
|
::= { specFilters 6 }
|
|
|
|
specDataField OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set the special database to filter packets based on the first
|
|
sixteen bytes of data in the packet."
|
|
::= { specFilters 7 }
|
|
|
|
specDeleteFilter OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deleteFilter (0)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Delete a filter from the special database."
|
|
::= { specFilters 8 }
|
|
|
|
|
|
-- TRAP TYPES OBJECT DEFINITIONS
|
|
--
|
|
-- This section describes the trap types that the bridge can generate. These
|
|
-- are not objects, but Object Identifiers used to indicate the specific trap.
|
|
-- They are taken from the object space and are thus documented here.
|
|
--
|
|
-- The SNMP trap messages are composed of two user definable areas:
|
|
-- a) the specific trap type and
|
|
-- b) the VarBindings (e.g. the interesting information)
|
|
--
|
|
-- The specific trap type is an integer that is used to determine the
|
|
-- specific trap which has occurred. The "interesting information" contains
|
|
-- a group of object identifiers and their values that provide information
|
|
-- about the trap.
|
|
--
|
|
-- Trap Decription
|
|
--
|
|
-- BridgeStatus
|
|
--
|
|
-- Specific Trap Type Code - 0x0301
|
|
--
|
|
-- When the bridge status changes, a trap will be generated. The
|
|
-- interesting information includes the current status of the bridge.
|
|
--
|
|
--
|
|
-- Trap Description
|
|
--
|
|
-- AcqDbaseFull
|
|
--
|
|
-- Specific Trap Type Code - 0x0302
|
|
--
|
|
-- When the acquired portion of the bridge's filtering database is full, a
|
|
-- trap is generated. The interesting information included with this trap
|
|
-- is the number of entries in the acquired database.
|
|
|
|
-- Formal definition of the Layer Management MIB. (e.g. PC cards )
|
|
|
|
lmcommon OBJECT IDENTIFIER ::= { layerMgmt 1 }
|
|
|
|
mAC OBJECT IDENTIFIER ::= { layerMgmt 2 }
|
|
|
|
ieee8023 OBJECT IDENTIFIER ::= { mAC 1 }
|
|
|
|
pcIF OBJECT IDENTIFIER ::= { ieee8023 1 }
|
|
|
|
pcIfRev OBJECT IDENTIFIER ::= { pcIF 1 }
|
|
|
|
|
|
|
|
pcDeviceName OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name of the PC device"
|
|
::= { pcIfRev 1 }
|
|
|
|
|
|
pcBoardType OBJECT-TYPE
|
|
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An object Identifier that indicates the type of the PC
|
|
board. This will include MAC type and Media type."
|
|
|
|
|
|
::= { pcIfRev 2 }
|
|
|
|
pcOwnerName OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The owner of this PC."
|
|
|
|
|
|
::= { pcIfRev 3 }
|
|
|
|
pcLocation OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A text description of the location of this PC."
|
|
|
|
::= { pcIfRev 4 }
|
|
|
|
pcMMACAddr OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC address of the MMAC that this PC is connected to."
|
|
|
|
|
|
::= { pcIfRev 5 }
|
|
|
|
pcMMACBoard OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The slot number of the board in the MMAC that this PC is
|
|
connected to."
|
|
|
|
|
|
::= { pcIfRev 6 }
|
|
|
|
pcMMACPort OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of the port on the board of the MMAC that this
|
|
PC is connected to."
|
|
::= { pcIfRev 7 }
|
|
|
|
pcApplication OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A text description of the network application running on
|
|
this PC."
|
|
|
|
|
|
::= { pcIfRev 8 }
|
|
|
|
pcDriverRev OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The revision of the LAN card driver."
|
|
::= { pcIfRev 9 }
|
|
|
|
pcOnboardMemory OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of Kilobytes of memory (eg. a 16K board would
|
|
reply 16)"
|
|
|
|
::= { pcIfRev 10 }
|
|
|
|
pcComment OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A user-defined character string."
|
|
|
|
|
|
::= { pcIfRev 11 }
|
|
|
|
pcMACAddr OBJECT-TYPE
|
|
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC address of the PC card."
|
|
|
|
|
|
::= { pcIfRev 12 }
|
|
|
|
pcFramesXmit OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of MAC frames transmitted by this PC card."
|
|
|
|
|
|
::= { pcIfRev 13 }
|
|
|
|
pcBytesXmit OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number bytes transmitted by this PC card."
|
|
|
|
|
|
::= { pcIfRev 14 }
|
|
|
|
pcMcastXmit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of multicasted frames sent by this PC card."
|
|
|
|
::= { pcIfRev 15 }
|
|
|
|
pcBcastXmit OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of broadcast frames from this PC card."
|
|
|
|
|
|
::= { pcIfRev 16 }
|
|
|
|
pcDeferXmit OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of transmit packets that were deferred due to
|
|
busy media."
|
|
|
|
::= { pcIfRev 17 }
|
|
|
|
pcSglColl OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of transmit packet experiencing a single
|
|
collision."
|
|
|
|
::= { pcIfRev 18 }
|
|
|
|
pcMultiColl OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of transmit packets that have experienced
|
|
multiple collisions."
|
|
|
|
::= { pcIfRev 19 }
|
|
|
|
pcTotXmitErrs OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of transmit errors."
|
|
|
|
::= { pcIfRev 20 }
|
|
|
|
pcLateColls OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of transmit packets that experienced late
|
|
collisions."
|
|
|
|
|
|
::= { pcIfRev 21 }
|
|
|
|
pcXcessColls OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of transmit packets aborted due to excess
|
|
collisions."
|
|
|
|
::= { pcIfRev 22 }
|
|
|
|
pcCarrErr OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of transmit packets that experience carrier
|
|
sense errors (ie. lose carrier during transmission)."
|
|
|
|
::= { pcIfRev 23 }
|
|
|
|
pcFramesRec OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames received."
|
|
|
|
::= { pcIfRev 24 }
|
|
|
|
pcBytesRec OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of bytes received by this station."
|
|
|
|
|
|
::= { pcIfRev 25 }
|
|
|
|
pcMcastRec OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of multicasted frames received."
|
|
|
|
::= { pcIfRev 26 }
|
|
|
|
pcBcastRec OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of broadcast packets received."
|
|
|
|
::= { pcIfRev 27 }
|
|
|
|
pcTotRecErrs OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of receive errors."
|
|
|
|
::= { pcIfRev 28 }
|
|
|
|
pcTooLong OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets received that are too long (over 1518
|
|
bytes)."
|
|
|
|
::= { pcIfRev 29 }
|
|
|
|
pcTooShort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets that are too short. (under 64 bytes
|
|
long)."
|
|
|
|
::= { pcIfRev 30 }
|
|
|
|
pcAlignErrs OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of alignment errors in receive packets."
|
|
|
|
|
|
::= { pcIfRev 31 }
|
|
|
|
pcCRCErrs OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of receive packets with CRC errors."
|
|
|
|
::= { pcIfRev 32 }
|
|
|
|
pcLenErrs OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets whose length is not equal to the
|
|
number of bytes received."
|
|
|
|
::= { pcIfRev 33 }
|
|
|
|
pcIntRecErr OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of receive packets that experienced internal
|
|
errors (eg. no receive buffers)."
|
|
|
|
::= { pcIfRev 34 }
|
|
|
|
pcSqeErr OBJECT-TYPE
|
|
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of SQE errors."
|
|
|
|
::= { pcIfRev 35 }
|
|
|
|
END
|