mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
librenms-librenms/mibs/WHISP-APS-MIB
laf b3f368da07 More work for initial Cambium support
2015-04-06 23:05:13 +01:00

4158 lines
119 KiB
Plaintext
Raw Blame History

--
-- whisp-aps-mib.mib
-- GENERATED FROM ui_db.xml
--
-- *******************************************************************************************************
-- Copyright 2005-2013 (c), Cambium Networks
-- Cambium Networks Confidential Proprietary
-- *******************************************************************************************************
--
-- Canopy Access Point and Backhaul Timing Master specific MIB definitions.
--
-- ********************************************************************************************************
WHISP-APS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32, IpAddress, NOTIFICATION-TYPE, TimeTicks, Unsigned32
FROM SNMPv2-SMI
DisplayString, PhysAddress, MacAddress
FROM SNMPv2-TC
OBJECT-GROUP
FROM SNMPv2-CONF
WhispLUID, WhispMACAddress, EventString
FROM WHISP-TCV2-MIB
whispModules, whispBox, whispAps
FROM WHISP-GLOBAL-REG-MIB
whispBoxEsn, whispBoxRFPhysicalRadioEntry
FROM WHISP-BOX-MIBV2-MIB
;
whispApsMibModule MODULE-IDENTITY
LAST-UPDATED "200304150000Z"
ORGANIZATION "Cambium Networks"
CONTACT-INFO
"Canopy Technical Support
email: technical-support@canopywireless.com"
DESCRIPTION
"This module contains MIB definitions for APs."
::= {whispModules 12}
-- -------------------------------------------------------------------------
-- Top Level Registrations
whispApsConfig OBJECT IDENTIFIER ::= {whispAps 1}
whispApsLink OBJECT IDENTIFIER ::= {whispAps 2}
whispApsLinkTestConfig OBJECT IDENTIFIER ::= {whispApsLink 1}
whispApsLinkTestResult OBJECT IDENTIFIER ::= {whispApsLink 2}
whispApsGPS OBJECT IDENTIFIER ::= {whispAps 3}
whispApsEvent OBJECT IDENTIFIER ::= {whispAps 5}
whispApsRegEvent OBJECT IDENTIFIER ::= {whispApsEvent 1}
whispGPSEvent OBJECT IDENTIFIER ::= {whispApsEvent 2}
whispApsDfsEvent OBJECT IDENTIFIER ::= {whispApsEvent 3}
whispApRegulatoryEvent OBJECT IDENTIFIER ::= {whispApsEvent 4}
whispApRFOverloadEvent OBJECT IDENTIFIER ::= {whispApsEvent 5}
whispApsGroups OBJECT IDENTIFIER ::= {whispAps 6}
whispApsStatus OBJECT IDENTIFIER ::= {whispAps 7}
whispApsDNS OBJECT IDENTIFIER ::= {whispAps 9}
whispApsControls OBJECT IDENTIFIER ::= {whispAps 11}
whispApsRFConfig OBJECT IDENTIFIER ::= {whispAps 10}
-- -------------------------------------------------------------------------
gpsInput OBJECT-TYPE
SYNTAX INTEGER {
generateSyncSignal(0),
syncToReceivedSignalTimingPort(1),
syncToReceivedSignalPowerPort(2)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The variable is deprecated. See gpsInput in whispBoxConfig."
::={whispApsConfig 1}
rfFreqCarrier OBJECT-TYPE
SYNTAX INTEGER {
wired(0)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The variable is deprecated. Please see radioFreqCarrier."
::={whispApsConfig 2}
apLinkSpeed OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The variable is deprecated."
::={whispApsConfig 3}
dwnLnkData OBJECT-TYPE
SYNTAX INTEGER (1..99)
UNITS "%"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This attribute is deprecated. Please see radioDownlinkPercent."
::={whispApsConfig 4}
highPriorityUpLnkPct OBJECT-TYPE
SYNTAX INTEGER (0..99)
UNITS "%"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Percentage of uplink slots for high priority data."
::={whispApsConfig 5}
numUAckSlots OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Total number of upstream ack slots."
::={whispApsConfig 6}
uAcksReservHigh OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Total number of upstream high priority ack slots"
::={whispApsConfig 7}
numDAckSlots OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Total number of downstream ack slots."
::={whispApsConfig 8}
dAcksReservHigh OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Total number of high priority downstream ack slots."
::={whispApsConfig 9}
numCtlSlots OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This OID is deprecated, please use numCtlSlotsHW."
::={whispApsConfig 10}
numCtlSlotsReserveHigh OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Total number of High priority upstream control (contention) slots."
::={whispApsConfig 11}
upLnkDataRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "Kilobits/sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sustained uplink bandwidth cap."
::={whispApsConfig 12}
upLnkLimit OBJECT-TYPE
SYNTAX INTEGER
UNITS "Kilobits/sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Burst uplink bandwidth cap."
::={whispApsConfig 13}
dwnLnkDataRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "Kilobits/sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sustained downlink bandwidth cap."
::={whispApsConfig 14}
dwnLnkLimit OBJECT-TYPE
SYNTAX INTEGER
UNITS "Kilobits/sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Burst downlink bandwidth cap."
::={whispApsConfig 15}
sectorID OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Advertise sector number for an AP.
Not supported for PMP450."
::={whispApsConfig 16}
maxRange OBJECT-TYPE
SYNTAX INTEGER
UNITS "miles"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This attribute is deprecated. Please see radioMaxRange."
::={whispApsConfig 17}
airLinkSecurity OBJECT-TYPE
SYNTAX INTEGER {
standard(0),
desEnhanced(1),
desEnhancedAndAuthentication(2),
authenticationIfAvailable(3)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Air Link Security.
desEnhancedAndAuthentication(2) and authenticationIfAvailable(3)
are only for APAS."
::={whispApsConfig 18}
berMode OBJECT-TYPE
SYNTAX INTEGER {
berStream(0),
noBerStream(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"AP backgroup BER mode."
::={whispApsConfig 19}
asIP1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Configure with whispApsDNS.authServer1."
::={whispApsConfig 20}
asIP2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Configure with whispApsDNS.authServer2."
::={whispApsConfig 21}
asIP3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Configure with whispApsDNS.authServer3."
::={whispApsConfig 22}
lanIpAp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LAN IP."
::={whispApsConfig 23}
lanMaskAp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LAN subnet mask."
::={whispApsConfig 24}
defaultGwAp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default gateway"
::={whispApsConfig 25}
privateIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Private IP."
::={whispApsConfig 26}
gpsTrap OBJECT-TYPE
SYNTAX INTEGER {
gpsTrapDisabled(0),
gpsTrapEnabled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Variable to enable/disable GPS sync/out-sync traps."
::={whispApsConfig 27}
regTrap OBJECT-TYPE
SYNTAX INTEGER {
regTrapDisabled(0),
regTrapEnabled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Variable to enable/disable registration complete/lost traps."
::={whispApsConfig 28}
txSpreading OBJECT-TYPE
SYNTAX INTEGER {
txSpreadingDisabled(0),
txSpreadingEnabled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Variable to enable/disable Transmit Frame Spreading. This option is for FSK only."
::={whispApsConfig 29}
apBeaconInfo OBJECT-TYPE
SYNTAX INTEGER {
enableApBeaconInfo(0),
disableApBeaconInfo(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Variable to enable/disable displaying AP beacon info through AP eval."
::={whispApsConfig 30}
authMode OBJECT-TYPE
SYNTAX INTEGER {
authenticationDisabled(0),
authenticationRequiredBam(1),
authenticationRequiredAP(3),
authenticationRequiredAAA(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Variable to enable/disable authentication. The authentication optional mode
is for APs only. This variable can only be set when authentication feature
is enabled. Setting it to 1 will use a BAM server for authentication of SMs. Setting
it to 2 will make use of the Authentication Key on the AP for authenticating SMs. The
keys must match on SM and AP in order for the SM to be authenticated in this mode."
::={whispApsConfig 31}
authKeyAp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication key. It should be 32 character long. Can be used on MultiPoint AP if AP Authentication mode is selected.
Otherwise, it is used on Backhauls."
::={whispApsConfig 32}
encryptionMode OBJECT-TYPE
SYNTAX INTEGER {
encryptionDisabled(0),
encryptionEnabled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Variable to enable/disable encryption."
::={whispApsConfig 33}
ntpServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Configure with whispApsDNS.ntpServer1, whispApsDNS.ntpServer2, and whispApsDNS.ntpServer3."
::={whispApsConfig 34}
broadcastRetryCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Broadcast Repeat Count : Range 0 -- 2. For APs."
::={whispApsConfig 35}
encryptDwBroadcast OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable Encrypted Downlink Broadcast. For FSK APs."
::={whispApsConfig 36}
updateAppAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Update Application Address."
::={whispApsConfig 37}
dfsConfig OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios."
::={whispApsConfig 38}
vlanEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable VLAN."
::={whispApsConfig 39}
configSource OBJECT-TYPE
SYNTAX INTEGER {
bam(0),
sm(1),
bamsm(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To configure CIR, MIR and VLAN through SM or BAM."
::={whispApsConfig 40}
apRateAdapt OBJECT-TYPE
SYNTAX INTEGER {
onex(0),
onextwox(1),
onextwoxthreex(2)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To enable or disable double rate."
::={whispApsConfig 41}
numCtlSlotsHW OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This attribute is deprecated. Please see radioControlSlots."
::={whispApsConfig 42}
displayAPEval OBJECT-TYPE
SYNTAX INTEGER {
enable(0),
disable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enable, it allows display of AP Eval Data at the SM."
::={whispApsConfig 43}
smIsolation OBJECT-TYPE
SYNTAX INTEGER {
smIsolationDisable(0),
smIsolationDrop(1),
smIsolationFwd(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"(0) -- Disable SM Isolation.
(1) -- Enable SM Isolation by blocking SM destined packets.
(2) -- Enable SM Isolation by forwarding SM packets upstream."
::={whispApsConfig 44}
ipAccessFilterEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable IP access filtering to Management functions.
(0) - IP access will be allowed from all addresses.
(1) - IP access will be controlled using allowedIPAccess1-3 entries."
::={whispApsConfig 45}
allowedIPAccess1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow access to AP Management from this IP.
0 is default setting to allow from all IPs."
::={whispApsConfig 46}
allowedIPAccess2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow access to AP Management from this IP.
0 is default setting to allow from all IPs."
::={whispApsConfig 47}
allowedIPAccess3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow access to AP Management from this IP.
0 is default setting to allow from all IPs."
::={whispApsConfig 48}
tslBridging OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1 = We are performing Translation Bridging 0 = We are not."
::={whispApsConfig 49}
untranslatedArp OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1 = We are sending untranslated ARP response. 0 = We are not."
::={whispApsConfig 50}
limitFreqBand900 OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1 = We are limiting the freq band of 900 radios. 0 = We are not."
::={whispApsConfig 51}
txPwrLevel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Deprecated, use 'transmitterOP' instead."
::={whispApsConfig 52}
rfFreqCaralt1 OBJECT-TYPE
SYNTAX INTEGER {
none(0)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"First DFS Alternate RF Frequency. (Only available for DFS radios) Used
as a backup frequency when Radar is detected on DFS enabled Radios.
The frequencies are:
5.4 radios:(5475,5485,5490 OFDM only),5495,5500,5505,5510,5515,5520,5525,
5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595,
5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665,
5670,5675,5680,5685,5690,5695,5700,5705,(5710,5715 OFDM Only).
(5.7 Platform 10 (SAL) radios with non-connectorized antennas do not support DFS)
5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805.
5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775,
5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840.
0: None."
::={whispApsConfig 53}
rfFreqCaralt2 OBJECT-TYPE
SYNTAX INTEGER {
none(0)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Second DFS Alternate RF Frequency. (Only available for DFS radios) Used
as a backup frequency when Radar is detected on DFS enabled Radios.
The frequencies are:
5.4 radios:(5475,5485,5490 OFDM only),5495,5500,5505,5510,5515,5520,5525,
5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595,
5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665,
5670,5675,5680,5685,5690,5695,5700,5705,(5710,5715 OFDM Only).
(5.7 Platform 10 (SAL) radios with non-connectorized antennas do not support DFS)
5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805.
5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775,
5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840.
0: None."
::={whispApsConfig 54}
scheduleWhitening OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1 = Schedule Whitening allowed. 0 = Schedule Whitening not allowed. This option is for FSK only"
::={whispApsConfig 55}
remoteSpectrumAnalysisDuration OBJECT-TYPE
SYNTAX INTEGER (10..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value in seconds for a remote spectrum analysis on an SM. Range is 10-1000 seconds."
::={whispApsConfig 56}
-- Perform Remote Spectrum Analysis on an LUID
remoteSpectrumAnalyzerLUID OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get will return always return 0.
Set will start Remote Spectrum Analyzer on specified LUID.
*Warning* This will cause the SM to disconnect from the AP!
You will lose the session for the specified duration!
If general error was returned then the LUID does not have an active session, or the
SM does not support Remote Spectrum Analysis."
::={whispApsConfig 57}
-- Allows BHS re-registration every 24 hours
bhReReg OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh."
::={whispApsConfig 58}
dlnkBcastCIR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Downlink Broadcast CIR (kbps)"
::={whispApsConfig 59}
verifyGPSChecksum OBJECT-TYPE
SYNTAX INTEGER {
doNotVerifyGPSMessageChecksum(0),
verifyGPSMessageChecksum(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable verification of GPS message checksums."
::={whispApsConfig 60}
apVlanOverride OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this option will cause an AP to retain its VLAN settings when turning it into an SM. It will be mostly helpful for
running spectrum analysis on the AP. Since doing that requires the AP to be turned into an SM, enabling this option will
allow you to keep the AP's VLAN configuration in place while the AP is running as an SM."
::={whispApsConfig 61}
dhcpRelayAgentEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
fullRelay(1),
option82Only(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or Disable MultiPoint AP acting as DHCP Relay Agent for all SMs and Clients underneath it.
(0) - Relay Agent disabled - SM/CPE devices will perform DHCP normally
(1) - Relay Agent enabled - AP will intercept DHCP DISCOVER message from SM and CPE, insert Option 82 containing SM's MAC address, and forward request to specified DHCP server."
::={whispApsConfig 62}
dhcpRelayAgentSrvrIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Configure with whispApsDNS.dhcprServer."
::={whispApsConfig 63}
colorCodeRescanTimer OBJECT-TYPE
SYNTAX INTEGER (0..43200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time in minutes for the subscriber to begin the idle timer. This timer
will begin as soon as a session is started.
This only fires if the device is in session with a non-primary color code.
A value of zero (0) disables this timer
(MultiPoint system Only)"
::={whispApsConfig 64}
colorCodeRescanIdleTimer OBJECT-TYPE
SYNTAX INTEGER (0..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time in minutes for the subscriber to check for an idle state. If an period has pass where no unicast RF traffic has occured (idle),
then the subscriber will begin to rescan.
This timer will wait until the timer set in colorCodeRescanTimer has expired before beginning.
This timer only fires if the device is in session with a non-primary color code.
A value of zero (0) mean to rescan without waiting for idle.
(MultiPoint system Only)"
::={whispApsConfig 65}
authKeyOptionAP OBJECT-TYPE
SYNTAX INTEGER {
useDefault(0),
useKeySet(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This option is for Multipoint APs only. This option will only be used if Authentication Mode is set
to AP Pre-Shared Key.
0 - Use default key.
1 - Use set key."
::={whispApsConfig 66}
asIP4 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Configure with whispApsDNS.authServer4."
::={whispApsConfig 67}
asIP5 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Configure with whispApsDNS.authServer5."
::={whispApsConfig 68}
onlyAllowVer95OrAbove OBJECT-TYPE
SYNTAX INTEGER {
onlyAllowVer95OrAboveDisabled(0),
onlyAllowVer95OrAboveEnabled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Only allow subscribers that are running version 9.5 or above. Any radio that has a version below 9.5 will not be
allowed to register."
::={whispApsConfig 69}
apRxDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is used for engineering debug and needs to be removed or moved to eng MIB before releasing the MIB."
::={whispApsConfig 70}
qinqEthType OBJECT-TYPE
SYNTAX INTEGER {
x88a8(0),
x8100(1),
x9100(2),
x9200(3),
x9300(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EtherType for QinQ (802.1ad) outer tag (S-Tag). 0x88a8 by default."
::={whispApsConfig 71}
fskSMTxPwrCntl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable AP control of SM TX power. For FSK AP radios capable of Transmit Power
Control."
::={whispApsConfig 72}
fskSMRcvTargetLvl OBJECT-TYPE
SYNTAX INTEGER (-80..-40)
UNITS "dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm)."
::={whispApsConfig 73}
authSharedSecret1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Server 1 Shared Secret."
::={whispApsConfig 74}
authSharedSecret2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Server 2 Shared Secret."
::={whispApsConfig 75}
authSharedSecret3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Server 3 Shared Secret."
::={whispApsConfig 76}
whispUsrAuthSharedSecret1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Use whispApsConfig.authSharedSecret1."
::={whispApsConfig 79}
whispUsrAuthSharedSecret2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Use whispApsConfig.authSharedSecret2."
::={whispApsConfig 80}
whispUsrAuthSharedSecret3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Use whispApsConfig.authSharedSecret3."
::={whispApsConfig 81}
whispUsrAcctSvr1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Use whispApsDNS.authServer1."
::={whispApsConfig 82}
whispUsrAcctSvr2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Use whispApsDNS.authServer2."
::={whispApsConfig 83}
whispUsrAcctSvr3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Use whispApsDNS.authServer3."
::={whispApsConfig 84}
whispUsrAuthPhase1 OBJECT-TYPE
SYNTAX INTEGER {
md5(0)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select method for User Authentication"
::={whispApsConfig 85}
whispWebUseAuthServer OBJECT-TYPE
SYNTAX INTEGER {
useRADIUSAccountingSvr(0),
useRADIUSAuthenticationSvr(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Use whispApsDNS.authServer[1-3]."
::={whispApsConfig 86}
dropSession OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SM/BHS MAC Address to drop session from the AP/BHM."
::={whispApsConfig 87}
uGPSPower OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or Disable power supply to Universal GPS module (UGPS capable APs only, when GPS_output_enable is NOT set)."
::={whispApsConfig 88}
timeZone OBJECT-TYPE
SYNTAX INTEGER (0..124)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the timezone offset for the radio. This change takes affect dynamically.
The available timezones are:
0 : (UTC) UTC - Coordinated Universal Time
1 : (UTC) GMT - Greenwich Mean Time
2 : (UTC) WET - Western European Time
3 : (UTC-12) BIT - Baker Island Time
4 : (UTC-11) SST - Samoa Standard Time
5 : (UTC-10) CKT - Cook Island Time
6 : (UTC-10) HAST - Hawaii-Aleutian Standard Time
7 : (UTC-10) HST - Hawaii Standard Time
8 : (UTC-10) TAHT - Tahiti Time
9 : (UTC-09:30) MIT - Marquesas Islands Time
10 : (UTC-09) AKST - Alaska Standard Time
11 : (UTC-09) GIT - Gambier Island Time
12 : (UTC-09) HADT - Hawaii-Aleutian Daylight Time
13 : (UTC-08) AKDT - Alaska Daylight Time
14 : (UTC-08) CIST - Clipperton Island Standard Time
15 : (UTC-08) PST - Pacific Standard Time (North America)
16 : (UTC-07) MST - Mountain Standard Time (North America)
17 : (UTC-07) PDT - Pacific Daylight Time (North America)
18 : (UTC-06) CST - Central Standard Time (North America)
19 : (UTC-06) EAST - Easter Island Standard Time
20 : (UTC-06) GALT - Galapagos Time
21 : (UTC-06) MDT - Mountain Daylight Time (North America)
22 : (UTC-05) CDT - Central Daylight Time (North America)
23 : (UTC-05) COT - Colombia Time
24 : (UTC-05) ECT - Ecuador Time
25 : (UTC-05) EST - Eastern Standard Time (North America)
26 : (UTC-04:30) VET - Venezuelan Standard Time
27 : (UTC-04) AST - Atlantic Standard Time
28 : (UTC-04) BOT - Bolivia Time
29 : (UTC-04) CLT - Chile Standard Time
30 : (UTC-04) COST - Colombia Summer Time
31 : (UTC-04) ECT - Eastern Caribbean Time (does not recognise DST)
32 : (UTC-04) EDT - Eastern Daylight Time (North America)
33 : (UTC-04) FKT - Falkland Islands Time
34 : (UTC-04) GYT - Guyana Time
35 : (UTC-03:30) NST - Newfoundland Standard Time
36 : (UTC-03:30) NT - Newfoundland Time
37 : (UTC-03) ADT - Atlantic Daylight Time
38 : (UTC-03) ART - Argentina Time
39 : (UTC-03) BRT - Brasilia Time
40 : (UTC-03) CLST - Chile Summer Time
41 : (UTC-03) FKST - Falkland Islands Summer Time
42 : (UTC-03) GFT - French Guiana Time
43 : (UTC-03) UYT - Uruguay Standard Time
44 : (UTC-02:30) NDT - Newfoundland Daylight Time
45 : (UTC-02) GST - South Georgia and the South Sandwich Islands
46 : (UTC-02) UYST - Uruguay Summer Time
47 : (UTC-01) AZOST - Azores Standard Time
48 : (UTC-01) CVT - Cape Verde Time
49 : (UTC+01) BST - British Summer Time (British Standard Time from Feb 1968 to Oct 1971)
50 : (UTC+01) CET - Central European Time
51 : (UTC+01) DFT - AIX specific equivalent of Central European Time
52 : (UTC+01) IST - Irish Summer Time
53 : (UTC+01) WAT - West Africa Time
54 : (UTC+01) WEDT - Western European Daylight Time
55 : (UTC+01) WEST - Western European Summer Time
56 : (UTC+02) CAT - Central Africa Time
57 : (UTC+02) CEDT - Central European Daylight Time
58 : (UTC+02) CEST - Central European Summer Time
59 : (UTC+02) EET - Eastern European Time
60 : (UTC+02) IST - Israel Standard Time
61 : (UTC+02) SAST - South African Standard Time
62 : (UTC+03) AST - Arab Standard Time (Kuwait, Riyadh)
63 : (UTC+03) AST - Arabic Standard Time (Baghdad)
64 : (UTC+03) EAT - East Africa Time
65 : (UTC+03) EEDT - Eastern European Daylight Time
66 : (UTC+03) EEST - Eastern European Summer Time
67 : (UTC+03) MSK - Moscow Standard Time
68 : (UTC+03:30) IRST - Iran Standard Time
69 : (UTC+04) AMT - Armenia Time
70 : (UTC+04) AST - Arabian Standard Time (Abu Dhabi, Muscat)
71 : (UTC+04) AZT - Azerbaijan Time
72 : (UTC+04) GET - Georgia Standard Time
73 : (UTC+04) MSD - Moscow Summer Time
74 : (UTC+04) MUT - Mauritius Time
75 : (UTC+04) RET - Reunion Time
76 : (UTC+04) SAMT - Samara Time
77 : (UTC+04) SCT - Seychelles Time
78 : (UTC+04:30) AFT - Afghanistan Time
79 : (UTC+05) AMST - Armenia Summer Time
80 : (UTC+05) HMT - Heard and McDonald Islands Time
81 : (UTC+05) PKT - Pakistan Standard Time
82 : (UTC+05) YEKT - Yekaterinburg Time
83 : (UTC+05:30) IST - Indian Standard Time
84 : (UTC+05:30) SLT - Sri Lanka Time
85 : (UTC+05:45) NPT - Nepal Time
86 : (UTC+06) BIOT - British Indian Ocean Time
87 : (UTC+06) BST - Bangladesh Standard Time
88 : (UTC+06) BTT - Bhutan Time
89 : (UTC+06) OMST - Omsk Time
90 : (UTC+06:30) CCT - Cocos Islands Time
91 : (UTC+06:30) MST - Myanmar Standard Time
92 : (UTC+07) CXT - Christmas Island Time
93 : (UTC+07) ICT - Indochina Time
94 : (UTC+07) KRAT - Krasnoyarsk Time
95 : (UTC+07) THA - Thailand Standard Time
96 : (UTC+08) ACT - ASEAN Common Time
97 : (UTC+08) AWST - Australian Western Standard Time
98 : (UTC+08) BDT - Brunei Time
99 : (UTC+08) CST - China Standard Time
100 : (UTC+08) HKT - Hong Kong Time
101 : (UTC+08) IRKT - Irkutsk Time
102 : (UTC+08) MST - Malaysian Standard Time
103 : (UTC+08) PST - Philippine Standard Time
104 : (UTC+08) SST - Singapore Standard Time
105 : (UTC+09) AWDT - Australian Western Daylight Time
106 : (UTC+09) JST - Japan Standard Time
107 : (UTC+09) KST - Korea Standard Time
108 : (UTC+09) YAKT - Yakutsk Time
109 : (UTC+09:30) ACST - Australian Central Standard Time
110 : (UTC+10) AEST - Australian Eastern Standard Time
111 : (UTC+10) ChST - Chamorro Standard Time
112 : (UTC+10) VLAT - Vladivostok Time
113 : (UTC+10:30) ACDT - Australian Central Daylight Time
114 : (UTC+10:30) LHST - Lord Howe Standard Time
115 : (UTC+11) AEDT - Australian Eastern Daylight Time
116 : (UTC+11) MAGT - Magadan Time
117 : (UTC+11) SBT - Solomon Islands Time
118 : (UTC+11:30) NFT - Norfolk Time[1]
119 : (UTC+12) FJT - Fiji Time
120 : (UTC+12) GILT - Gilbert Island Time
121 : (UTC+12) PETT - Kamchatka Time
122 : (UTC+12:45) CHAST - Chatham Standard Time
123 : (UTC+13) PHOT - Phoenix Island Time
124 : (UTC+14) LINT - Line Islands Time"
::={whispApsConfig 89}
ofdmSMRcvTargetLvl OBJECT-TYPE
SYNTAX INTEGER (-80..-40)
UNITS "dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). As of release 12.1, on MIMO systems this is a combined power level value."
::={whispApsConfig 90}
radiusPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port used to connect to the RADIUS server. Default is 1812."
::={whispApsConfig 91}
radiusAcctPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port used to for RADIUS Accounting. Default is 1813."
::={whispApsConfig 92}
lastSesStatsReset OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the timestamp of last reset of session stats or None otherwise."
::={whispApsConfig 93}
resetSesStats OBJECT-TYPE
SYNTAX INTEGER {
noReset(0),
reset(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Resets the session stats if true."
::={whispApsConfig 94}
rfOLTrap OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable SNMP Trap for when RF Overload exceeds configured Threshold level."
::={whispApsConfig 95}
rfOLThreshold OBJECT-TYPE
SYNTAX INTEGER (1..100)
UNITS "%"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Percent of packet overload in the RF Downlink where SNMP is generated and sent to Network Manager."
::={whispApsConfig 96}
rfOLEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Throughput RF Overload Monitoring monitoring."
::={whispApsConfig 97}
actionListFilename OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the file that contains the Action List for Auto update commands from CNUT"
::={whispApsConfig 98}
enableAutoupdate OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/Disables auto-update of the SM's under an AP"
::={whispApsConfig 99}
accountingSmReAuthInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select Interval for Reauthentication of SM"
::={whispApsConfig 100}
syslogDomainNameAppend OBJECT-TYPE
SYNTAX INTEGER {
disableDomain(0),
appendDomain(1)}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This attribute is deprecated. Use syslogDomainNameAppend in whispBoxAttributesGroup"
::={whispApsConfig 101}
syslogServerAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This attribute is deprecated. Use syslogServerAddr in whispBoxAttributesGroup"
::={whispApsConfig 102}
syslogServerPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute is deprecated. Use syslogServerPort in whispBoxAttributesGroup"
::={whispApsConfig 103}
syslogXmitAP OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/Disables transmission of Syslogs from AP/BHM"
::={whispApsConfig 104}
syslogXmitSMs OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/Disables transmission of Syslogs from connected SMs/BHS. This can be over-ridden by the setting on individual SMs/ the BHS."
::={whispApsConfig 105}
accountingInterimUpdateInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select Interval for Interim Updates"
::={whispApsConfig 106}
gpsOutputEn OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or Disable GPS sync output enable."
::={whispApsConfig 107}
radioMode OBJECT-TYPE
SYNTAX INTEGER {
combo(0),
comboDualChan(1),
mimoOnly(2),
fskOnly(3)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This OID is obsolete."
::={whispApsConfig 206}
rfTelnetAccess OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows/prohibits uplink Telnet access (SM->AP)."
::={whispApsConfig 207}
upLnkMaxBurstDataRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "Kilobits/sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum burst uplink rate."
::={whispApsConfig 208}
dwnLnkMaxBurstDataRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "Kilobits/sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum burst downlink rate."
::={whispApsConfig 209}
rfPPPoEPADIForwarding OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables forwarding of PPPoE PADI packets from AP to SM."
::={whispApsConfig 210}
allowedIPAccessNMLength1 OBJECT-TYPE
SYNTAX INTEGER (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
::={whispApsConfig 211}
allowedIPAccessNMLength2 OBJECT-TYPE
SYNTAX INTEGER (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
::={whispApsConfig 212}
allowedIPAccessNMLength3 OBJECT-TYPE
SYNTAX INTEGER (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
::={whispApsConfig 213}
bridgeFloodUnknownsEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable bridge flooding unknown unicast packets.
(0) - Bridge will not forward unknown unicast packets.
(1) - Bridge will flood unknown unicast packets."
::={whispApsConfig 214}
berModSelect OBJECT-TYPE
SYNTAX INTEGER {
qpsk(0),
qam-16(1),
qam-64(2),
qam-256(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The modulation the AP generates BER at. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM."
::={whispApsConfig 215}
remoteSpectrumAnalyzerScanBandwidth OBJECT-TYPE
SYNTAX INTEGER {
bandwidth5MHz(0),
bandwidth10MHz(1),
bandwidth20MHz(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Scanning Bandwidth used for the Remote Spectrum Analyzer. Only available on PMP 450."
::={whispApsConfig 216}
multicastVCDataRate OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
rate1X(4),
rate2X(5),
rate4X(7),
rate6X(8),
rate8X(9)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The data rate that is used for the Multicast VC. 8X is for engineering only."
::={whispApsConfig 217}
dlnkMcastCIR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Downlink Multicast CIR (kbps)"
::={whispApsConfig 218}
multicastRetryCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multicast Repeat Count : Range 0 - 2. For APs."
::={whispApsConfig 219}
apConfigAdjacentChanSupport OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable or disable adjacent channel support."
::={whispApsConfig 220}
whispRegStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This shows the registration status of a link."
::={whispApsLink 4}
-- Link test configuration
linkTestLUID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LUID selection for Link Test. Valid range: 2-255"
::={whispApsLinkTestConfig 1}
linkTestDuration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Duration for the Link Test. Valid range: 2-10 seconds"
::={whispApsLinkTestConfig 2}
-- Link test action
linkTestAction OBJECT-TYPE
SYNTAX INTEGER {
stopped(0),
start(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting value 1 will initiate link test. Note that trying to set 0 will not stop the test.
In fact it will return an error message. The value of 0 just indicates the idle state
meaning no test is running or the current test is done.
That's why the word stopped is used and not the action verb stop."
::={whispApsLinkTestConfig 3}
linkTestPktLength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Packet length for Link Test. Valid range: 64-1714 bytes"
::={whispApsLinkTestConfig 4}
linkTestMode OBJECT-TYPE
SYNTAX INTEGER {
rflinktest(0),
linktestwithbridging(1),
linktestwithbridgingandmir(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Link Test Mode
0 = RF Link Test (traffic doesn't go through bridge, highest throughput)
1 = Link Test with Bridging
2 = Link Test with Bridging and MIR"
::={whispApsLinkTestConfig 5}
linkTestSNRCalculation OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Signal to Noise Ratio (SNR) calculations during a Link Test.
Enabling(1) will calulate SNR on all receiving packets.
Due to load on CPU, will slightly degrade packet per second capabilities.
Only applicable to GenII OFDM products and up."
::={whispApsLinkTestConfig 6}
linkTestWithDualPath OBJECT-TYPE
SYNTAX INTEGER {
lowpriorityvconly(0),
highandlowpriorityvcs(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Link Test with:
0 = Low Priority VC only
1 = High and Low Priority VCs"
::={whispApsLinkTestConfig 7}
-- Link test configuration
linkTestNumPkt OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of packets to send. Valid range: 0-64 where 0 will
flood the link for the duration of the test."
::={whispApsLinkTestConfig 8}
-- Link test results
testLUID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LUID number of selected unit."
::={whispApsLinkTestResult 1}
linkTestStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status for Link Test."
::={whispApsLinkTestResult 2}
linkTestError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error status of Link Test:
(1) Failed to recieve handshake from remote device
(2) No session is currently active. Please try again after session established.
(3) Received a bad transaction ID. Please try again.
(4) We werent able to send the test request to the remote device.
(5) We didnt receive any results from the remote device."
::={whispApsLinkTestResult 3}
testDuration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of link test."
::={whispApsLinkTestResult 4}
downLinkRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Down Link Rate."
::={whispApsLinkTestResult 5}
upLinkRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Up Link Rate."
::={whispApsLinkTestResult 6}
downLinkEff OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Down Link Efficiency."
::={whispApsLinkTestResult 7}
maxDwnLinkIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For link test results, the maximum possible downlink efficiency percentage (always 100%)."
::={whispApsLinkTestResult 8}
actDwnLinkIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual down link index."
::={whispApsLinkTestResult 9}
expDwnFragCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Expected Fragment Count."
::={whispApsLinkTestResult 10}
actDwnFragCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Fragment Count"
::={whispApsLinkTestResult 11}
upLinkEff OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Up link efficiency."
::={whispApsLinkTestResult 12}
expUpFragCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink expected Fragment Count."
::={whispApsLinkTestResult 13}
actUpFragCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual uplink Fragment Count."
::={whispApsLinkTestResult 14}
maxUpLinkIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For link test results, the maximum possible uplink efficiency percentage (always 100%)."
::={whispApsLinkTestResult 15}
actUpLinkIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual Up link index."
::={whispApsLinkTestResult 16}
fragments1xDwnLinkVertical OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on down link at 1X (QPSK).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 17}
fragments2xDwnLinkVertical OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on down link at 2X (16-QAM).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 18}
fragments3xDwnLinkVertical OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on down link at 3X (64-QAM).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 19}
fragments4xDwnLinkVertical OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on down link at 4X (256-QAM).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 20}
fragments1xUpLinkVertical OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on up link at 1X (QPSK).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 21}
fragments2xUpLinkVertical OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on up link at 2X (16-QAM).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 22}
fragments3xUpLinkVertical OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on up link at 3X (64-QAM).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 23}
fragments4xUpLinkVertical OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on up link at 4X (256-QAM).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 24}
bitErrorsCorrected1xDwnLinkVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on down link at 1X (QPSK).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 25}
bitErrorsCorrected2xDwnLinkVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on down link at 2X (16-QAM).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 26}
bitErrorsCorrected3xDwnLinkVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on down link at 3X (64-QAM).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 27}
bitErrorsCorrected4xDwnLinkVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on down link at 4X (256-QAM).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 28}
bitErrorsCorrected1xUpLinkVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on up link at 1X (QPSK).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 29}
bitErrorsCorrected2xUpLinkVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on up link at 2X (16-QAM).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 30}
bitErrorsCorrected3xUpLinkVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on up link at 3X (64-QAM).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 31}
bitErrorsCorrected4xUpLinkVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on up link at 4X (256-QAM).
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 32}
signalToNoiseRatioDownLinkVertical OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Estimated Signal to Noise Ratio in dB for the down link.
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 33}
signalToNoiseRatioUpLinkVertical OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Estimated Signal to Noise Ratio in dB for the up link.
For Gen II OFDM and forward.
For MIMO this is the vertical path."
::={whispApsLinkTestResult 34}
fragments1xDwnLinkHorizontal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on down link at 1X (QPSK).
For MIMO only.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 35}
fragments2xDwnLinkHorizontal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on down link at 2X (16-QAM).
For MIMO only.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 36}
fragments3xDwnLinkHorizontal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on down link at 3X (64-QAM).
For MIMO only.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 37}
fragments4xDwnLinkHorizontal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on down link at 4X (256-QAM).
For MIMO only.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 38}
fragments1xUpLinkHorizontal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on up link at 1X (QPSK).
For MIMO only.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 39}
fragments2xUpLinkHorizontal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on up link at 2X (16-QAM).
For MIMO only.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 40}
fragments3xUpLinkHorizontal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on up link at 3X (64-QAM).
For MIMO only.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 41}
fragments4xUpLinkHorizontal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of fragments received on up link at 4X (256-QAM).
For MIMO only.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 42}
bitErrorsCorrected1xDwnLinkHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on down link at 1X (QPSK).
For MIMO and forward.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 43}
bitErrorsCorrected2xDwnLinkHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on down link at 2X (16-QAM).
For MIMO and forward.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 44}
bitErrorsCorrected3xDwnLinkHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on down link at 3X (64-QAM).
For MIMO and forward.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 45}
bitErrorsCorrected4xDwnLinkHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on down link at 4X (256-QAM).
For MIMO and forward.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 46}
bitErrorsCorrected1xUpLinkHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on up link at 1X (QPSK).
For MIMO and forward.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 47}
bitErrorsCorrected2xUpLinkHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on up link at 2X (16-QAM).
For MIMO and forward.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 48}
bitErrorsCorrected3xUpLinkHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of bit errors corrected on average per fragment on up link at 3X (64-QAM).
For MIMO and forward.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 49}
bitErrorsCorrected4xUpLinkHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bit errors corrected on average per fragment on up link at 4X (256-QAM).
For MIMO and forward.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 50}
signalToNoiseRatioDownLinkHorizontal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Estimated Signal to Noise Ratio in dB for the down link.
For MIMO and forward.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 51}
signalToNoiseRatioUpLinkHorizontal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Estimated Signal to Noise Ratio in dB for the up link.
For Gen II OFDM and forward.
For MIMO this is the horizontal path."
::={whispApsLinkTestResult 52}
whispGPSStats OBJECT-TYPE
SYNTAX INTEGER {
gpsSynchronized(1),
gpsLostSync(2),
generatingSync(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This shows whether the AP is synchrinized
to the GPS timer."
::={whispApsGPS 1}
gpsSyncSource OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source of GPS Sync Pulse."
::={whispApsGPS 2}
gpsSyncStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Live value of Sync Status."
::={whispApsGPS 3}
gpsTrackingMode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS tracking mode."
::={whispApsGPS 4}
gpsTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS time."
::={whispApsGPS 5}
gpsDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS date."
::={whispApsGPS 6}
gpsSatellitesTracked OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of satellites GPS is tracking."
::={whispApsGPS 7}
gpsSatellitesVisible OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of satellites the GPS sees"
::={whispApsGPS 8}
gpsHeight OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS height."
::={whispApsGPS 9}
gpsAntennaConnection OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Antenna Connection status."
::={whispApsGPS 10}
gpsLatitude OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS Latitude."
::={whispApsGPS 11}
gpsLongitude OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS Longitude."
::={whispApsGPS 12}
gpsInvalidMsg OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of invalid messages."
::={whispApsGPS 13}
gpsRestartCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of GPS unit restarts."
::={whispApsGPS 14}
gpsReInitCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS ReInit counts. The number of times we have done a complete re-initialization of the GPS device."
::={whispApsGPS 15}
gpsReceiverInfo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string contains information on GPS receiver."
::={whispApsGPS 16}
gpsFreeRun OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is deprecated.
Setting this value to false will set AutoSync.
Setting this value to true will set AutoSync plus Free Run."
::={whispApsGPS 17}
autoSyncStatus OBJECT-TYPE
SYNTAX INTEGER {
noSync(0),
onBoardGPSSync(1),
timingPortUGPSSync(2),
onBoardGPSAndTimingPortUGPSSync(3),
powrPortSync(4),
onBoardGPSAndPowrPortSync(5),
timingPortUGPSAndPowrPortSync(6),
onBoardGPSAndTimingPortUGPSAndPowrPortSync(7)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Live value of Sync Status.
Following values represent what sources have sync.
(0) No Sync
(1) On-board GPS Sync
(2) Timing Port/UGPS Sync
(3) On-board GPS and Timing Port/UGPS Sync
(4) Power Port Sync
(5) On-board GPS and Power Port Sync
(6) Timing Port/UGPS and Power Port Sync
(7) On-board GPS, Timing Port/UGPS and Power Port Sync"
::={whispApsGPS 18}
-- Registration Events
whispRegComplete NOTIFICATION-TYPE
OBJECTS {
linkLUID,
linkPhysAddress}
STATUS current
DESCRIPTION
"Signals registration complete."
::={whispApsRegEvent 1}
whispRegLost NOTIFICATION-TYPE
OBJECTS {
linkLUID,
linkPhysAddress}
STATUS current
DESCRIPTION
"Signals registration lost."
::={whispApsRegEvent 2}
whispRegFailure NOTIFICATION-TYPE
OBJECTS {
regFailESN,
regGrantReason}
STATUS current
DESCRIPTION
"Signals a registration failure has occured."
::={whispApsRegEvent 3}
whispDefKeyUsed NOTIFICATION-TYPE
OBJECTS {
linkLUID,
linkPhysAddress}
STATUS current
DESCRIPTION
"Signals Default Key used for encryptiont."
::={whispApsRegEvent 4}
-- GPS Events
whispGPSInSync NOTIFICATION-TYPE
OBJECTS {
whispGPSStats,
whispBoxEsn}
STATUS current
DESCRIPTION
"Signals a transition from not-synchronized to synchronized."
::={whispGPSEvent 1}
whispGPSOutSync NOTIFICATION-TYPE
OBJECTS {
gpsStatus,
whispBoxEsn}
STATUS current
DESCRIPTION
"Signals a transition from synchronized to not-synchronized."
::={whispGPSEvent 2}
-- DFS events
whispRadarDetected NOTIFICATION-TYPE
OBJECTS {
dfsStatus,
whispBoxEsn}
STATUS current
DESCRIPTION
"Radar detected transmit stopped."
::={whispApsDfsEvent 1}
whispRadarEnd NOTIFICATION-TYPE
OBJECTS {
dfsStatus,
whispBoxEsn}
STATUS current
DESCRIPTION
"Radar ended back to normal transmit."
::={whispApsDfsEvent 2}
-- Regulatory Failure due to Invalid Channel set for the region.
regulatoryApCheckInvalidChanFailed NOTIFICATION-TYPE
OBJECTS {
regulatoryStatus,
whispBoxEsn}
STATUS current
DESCRIPTION
"Regulatory Check failed for the unit due to a invalid channel for the configured region.
regulatoryStatus - Text description for the failure.
physAddress - the MAC address of the unit."
::={whispApRegulatoryEvent 1}
-- Regulatory Failure due to no region set
regulatoryCheckFailedNoRegionAp NOTIFICATION-TYPE
OBJECTS {
whispBoxEsn}
STATUS current
DESCRIPTION
"Regulatory Check failed because a valid region has not be configured.
physAddress - the MAC address of the unit."
::={whispApRegulatoryEvent 2}
-- Regulatory Failure due to Invalid Channel Bandwidth set for the region.
regulatoryApCheckInvalidChBwFailed NOTIFICATION-TYPE
OBJECTS {
regulatoryStatus,
whispBoxEsn}
STATUS current
DESCRIPTION
"Regulatory Check failed due to an invalid channel bandwidth for the configured region.
regulatoryStatus - Text description for the failure.
physAddress - the MAC address of the unit."
::={whispApRegulatoryEvent 3}
-- RF link overload detection in the Downlink Direction.
rfLinkOverloadCondition NOTIFICATION-TYPE
OBJECTS {
rfOutDiscardRate,
whispBoxEsn}
STATUS current
DESCRIPTION
"AP has exceeded the preset discard percentage in the RF Downlink Direction.
rfOutDiscardRate - Current discard Rate.
physAddress - the MAC address of the unit."
::={whispApRFOverloadEvent 1}
whispLinkTestGroup OBJECT-GROUP
OBJECTS {
linkTestLUID,
linkTestDuration,
linkTestAction,
linkTestPktLength,
testLUID,
linkTestStatus,
linkTestError,
testDuration,
downLinkRate,
upLinkRate,
downLinkEff,
maxDwnLinkIndex,
actDwnLinkIndex,
expDwnFragCount,
actDwnFragCount,
upLinkEff,
expUpFragCount,
actUpFragCount,
maxUpLinkIndex,
actUpLinkIndex,
fragments1xDwnLinkVertical,
fragments2xDwnLinkVertical,
fragments3xDwnLinkVertical,
fragments4xDwnLinkVertical,
fragments1xUpLinkVertical,
fragments2xUpLinkVertical,
fragments3xUpLinkVertical,
fragments4xUpLinkVertical,
fragments1xDwnLinkHorizontal,
fragments2xDwnLinkHorizontal,
fragments3xDwnLinkHorizontal,
fragments4xDwnLinkHorizontal,
fragments1xUpLinkHorizontal,
fragments2xUpLinkHorizontal,
fragments3xUpLinkHorizontal,
fragments4xUpLinkHorizontal,
bitErrorsCorrected1xDwnLinkVertical,
bitErrorsCorrected2xDwnLinkVertical,
bitErrorsCorrected3xDwnLinkVertical,
bitErrorsCorrected4xDwnLinkVertical,
bitErrorsCorrected1xUpLinkVertical,
bitErrorsCorrected2xUpLinkVertical,
bitErrorsCorrected3xUpLinkVertical,
bitErrorsCorrected4xUpLinkVertical,
signalToNoiseRatioDownLinkVertical,
signalToNoiseRatioUpLinkVertical,
bitErrorsCorrected1xDwnLinkHorizontal,
bitErrorsCorrected2xDwnLinkHorizontal,
bitErrorsCorrected3xDwnLinkHorizontal,
bitErrorsCorrected4xDwnLinkHorizontal,
bitErrorsCorrected1xUpLinkHorizontal,
bitErrorsCorrected2xUpLinkHorizontal,
bitErrorsCorrected3xUpLinkHorizontal,
bitErrorsCorrected4xUpLinkHorizontal,
signalToNoiseRatioDownLinkHorizontal,
signalToNoiseRatioUpLinkHorizontal,
linkTestSNRCalculation,
linkTestWithDualPath,
linkTestMode,
linkTestNumPkt}
STATUS current
DESCRIPTION
"WHiSP APs link test group."
::= {whispApsGroups 1}
whispApsConfigGroup OBJECT-GROUP
OBJECTS {
gpsInput,
rfFreqCarrier,
dwnLnkData,
highPriorityUpLnkPct,
numUAckSlots,
uAcksReservHigh,
numDAckSlots,
dAcksReservHigh,
numCtlSlots,
numCtlSlotsReserveHigh,
upLnkMaxBurstDataRate,
upLnkDataRate,
upLnkLimit,
dwnLnkMaxBurstDataRate,
dwnLnkDataRate,
dwnLnkLimit,
sectorID,
maxRange,
asIP1,
asIP2,
asIP3,
asIP4,
asIP5,
lanIpAp,
lanMaskAp,
defaultGwAp,
privateIp,
gpsTrap,
regTrap,
txSpreading,
apBeaconInfo,
authMode,
authKeyAp,
authKeyOptionAP,
encryptionMode,
ntpServerIp,
multicastRetryCount,
encryptDwBroadcast,
updateAppAddress,
dfsConfig,
vlanEnable,
configSource,
apRateAdapt,
numCtlSlotsHW,
displayAPEval,
smIsolation,
bridgeFloodUnknownsEnable,
ipAccessFilterEnable,
allowedIPAccess1,
allowedIPAccess2,
allowedIPAccess3,
allowedIPAccessNMLength1,
allowedIPAccessNMLength2,
allowedIPAccessNMLength3,
rfTelnetAccess,
rfPPPoEPADIForwarding,
tslBridging,
untranslatedArp,
limitFreqBand900,
txPwrLevel,
rfFreqCaralt1,
rfFreqCaralt2,
scheduleWhitening,
remoteSpectrumAnalysisDuration,
remoteSpectrumAnalyzerLUID,
bhReReg,
dlnkBcastCIR,
dlnkMcastCIR,
verifyGPSChecksum,
qinqEthType,
multicastVCDataRate,
colorCodeRescanTimer,
colorCodeRescanIdleTimer,
fskSMTxPwrCntl,
fskSMRcvTargetLvl,
berModSelect,
lastSesStatsReset,
resetSesStats,
syslogDomainNameAppend,
syslogServerAddr,
syslogServerPort,
syslogXmitAP,
syslogXmitSMs,
uGPSPower,
gpsOutputEn,
radioMode,
authSharedSecret1,
authSharedSecret2,
authSharedSecret3,
radiusPort,
radiusAcctPort,
rfOLEnable,
rfOLTrap,
rfOLThreshold,
remoteSpectrumAnalyzerScanBandwidth,
apConfigAdjacentChanSupport,
ofdmSMRcvTargetLvl,
apRxDelay,
apVlanOverride,
dhcpRelayAgentEnable,
dhcpRelayAgentSrvrIP,
onlyAllowVer95OrAbove,
whispWebUseAuthServer,
whispUsrAuthSharedSecret1,
whispUsrAuthSharedSecret2,
whispUsrAuthSharedSecret3,
whispUsrAcctSvr1,
whispUsrAcctSvr2,
whispUsrAcctSvr3,
whispUsrAuthPhase1,
accountingInterimUpdateInterval,
accountingSmReAuthInterval,
dropSession,
timeZone,
actionListFilename,
enableAutoupdate}
STATUS current
DESCRIPTION
"WHiSP APs configuration group."
::= {whispApsGroups 2}
whispApsLinkTableGroup OBJECT-GROUP
OBJECTS {
linkLUID,
linkDescr,
linkPhysAddress,
linkManagementIP,
linkFragmentsReceived1XVertical,
linkFragmentsReceived2XVertical,
linkFragmentsReceived3XVertical,
linkFragmentsReceived4XVertical,
signalToNoiseRatioVertical,
linkFragmentsReceived1XHorizontal,
linkFragmentsReceived2XHorizontal,
linkFragmentsReceived3XHorizontal,
linkFragmentsReceived4XHorizontal,
signalToNoiseRatioHorizontal,
linkSignalStrengthRatio,
linkRadioDbmHorizontal,
linkRadioDbmVertical,
maxSMTxPwr,
productType,
linkAdaptRateLowPri,
linkAdaptRateHighPri,
autoUpdateStatus,
linkMtu,
linkSpeed,
linkOperStatus,
linkInOctets,
linkInUcastPkts,
linkInNUcastPkts,
linkInDiscards,
linkInError,
linkInUnknownProtos,
linkOutOctets,
linkOutUcastPkts,
linkOutNUcastPkts,
linkOutDiscards,
linkOutError,
linkOutQLen,
linkSessState,
linkESN,
linkRSSI,
linkAveJitter,
linkLastJitter,
linkAirDelay,
linkRegCount,
linkReRegCount,
linkTimeOut,
linkLastRSSI,
sessionCount,
softwareVersion,
softwareBootVersion,
fpgaVersion,
linkSiteName,
avgPowerLevel,
lastPowerLevel,
sesDownLinkRate,
sesDownLinkLimit,
sesUpLinkRate,
sesUpLinkLimit,
adaptRate,
sesLoUpCIR,
sesLoDownCIR,
sesHiUpCIR,
sesHiDownCIR,
platformVer,
smSessionTmr,
smSessionSeqNumMismatch,
dataVCNum,
hiPriQEn,
dataVCNumHiQ,
linkInOctetsHiQ,
linkInUcastPktsHiQ,
linkInNUcastPktsHiQ,
linkInDiscardsHiQ,
linkInErrorHiQ,
linkInUnknownProtosHiQ,
linkOutOctetsHiQ,
linkOutUcastPktsHiQ,
linkOutNUcastPktsHiQ,
linkOutDiscardsHiQ,
linkOutErrorHiQ,
vcQOverflow,
vcQOverflowHiQ,
p7p8HiPriQEn,
p7p8HiPriQ,
linkAirDelayns,
linkQualityAPData,
radiusReplyMsg,
radiusFramedIPAddress,
radiusFramedIPNetmask,
radiusDefaultGateway}
STATUS current
DESCRIPTION
"WHiSP APs Link Table group."
::= {whispApsGroups 3}
whispApsNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
whispRegComplete,
whispRegLost,
whispRegFailure,
whispDefKeyUsed,
whispGPSInSync,
whispGPSOutSync,
whispRadarDetected,
whispRadarEnd,
regulatoryApCheckInvalidChanFailed,
regulatoryCheckFailedNoRegionAp,
regulatoryApCheckInvalidChBwFailed,
rfLinkOverloadCondition}
STATUS current
DESCRIPTION
"WHiSP APs notification group."
::= {whispApsGroups 4}
whispApsFailedRegTableGroup OBJECT-GROUP
OBJECTS {
regGrantReason,
regFailESN,
regFailTime,
regFailSeqNum,
regFailReasonText}
STATUS current
DESCRIPTION
"WHiSP APs Failed Registration Table group."
::= {whispApsGroups 5}
-- Access Point status page
regCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of registered SMs."
::={whispApsStatus 1}
gpsStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GPS status."
::={whispApsStatus 2}
radioSlicingAp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The variable is deprecated."
::={whispApsStatus 3}
radioTxGainAp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio transmit gain setting."
::={whispApsStatus 4}
dataSlotDwn OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of data slot down."
::={whispApsStatus 5}
dataSlotUp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of data slot up."
::={whispApsStatus 6}
dataSlotUpHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of high priority data slot up."
::={whispApsStatus 7}
upLnkAckSlot OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink ack slots."
::={whispApsStatus 8}
upLnkAckSlotHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hige priority uplink ack slots."
::={whispApsStatus 9}
dwnLnkAckSlot OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downlink ack slots."
::={whispApsStatus 10}
dwnLnkAckSlotHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hige priority downlink ack slots."
::={whispApsStatus 11}
numCtrSlot OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of control slots."
::={whispApsStatus 12}
numCtrSlotHi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High priority control slot."
::={whispApsStatus 13}
dfsStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dynamic frequency shifting status."
::={whispApsStatus 14}
dfsStatusPrimary OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dynamic frequency shifting status for Primary Channel."
::={whispApsStatus 15}
dfsStatusAlt1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dynamic frequency shifting status for Alternate Channel 1"
::={whispApsStatus 16}
dfsStatusAlt2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dynamic frequency shifting status for Alternate Channel 2"
::={whispApsStatus 17}
maxRegSMCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of unique Subscriber Modules registered with this AP at once"
::={whispApsStatus 18}
systemTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the system time of the unit"
::={whispApsStatus 19}
lastNTPTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays the last NTP time acquired by the AP"
::={whispApsStatus 20}
regulatoryStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of the regulatory check on the AP."
::={whispApsStatus 21}
dhcpRlyAgntStat-reqRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DHCP Requests received by the DHCP Relay."
::={whispApsStatus 22}
dhcpRlyAgntStat-reqRelayed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DHCP Requests relayed by the DHCP Relay."
::={whispApsStatus 23}
dhcpRlyAgntStat-reqDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DHCP Requests discarded by the DHCP Relay."
::={whispApsStatus 24}
dhcpRlyAgntStat-respRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DHCP Replies received by the DHCP Relay."
::={whispApsStatus 25}
dhcpRlyAgntStat-respRelayed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DHCP Replies relayed by the DHCP Relay."
::={whispApsStatus 26}
dhcpRlyAgntStat-respDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DHCP Replies discarded by the DHCP Relay."
::={whispApsStatus 27}
dhcpRlyAgntStat-untrustedDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of untrusted messages discarded by the DHCP Relay."
::={whispApsStatus 28}
dhcpRlyAgntStat-maxHopDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of messages discarded by the DHCP Relay due to exceeded max hop."
::={whispApsStatus 29}
dhcpRlyAgntStat-pktTooBig OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of messages forwarded without relay information by the DHCP Relay due to relay information exceeding max message size."
::={whispApsStatus 30}
dhcpRlyAgntStat-invalidGiaddrDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of messages discarded by the DHCP Relay due to invalid giaddr in packet."
::={whispApsStatus 31}
regFailureCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number or Registration Grant Failures."
::={whispApsStatus 32}
ntpLogSNMP OBJECT-TYPE
SYNTAX EventString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NTP Log"
::={whispApsStatus 33}
uGPSPowerStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current UGPS Power Status (UGPS capable APs only)."
::={whispApsStatus 34}
rfOutDiscardRate OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of OutDiscards on the RF link (RF Overload %) in the last minute."
::={whispApsStatus 35}
autoUpdateGlobalStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the Auto-Update Command"
::={whispApsStatus 36}
currentRadioFreqCarrier OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Radio Frequency Carrier"
::={whispApsStatus 37}
ntpDomainNameAppend OBJECT-TYPE
SYNTAX INTEGER {
disableDomain(0),
appendDomain(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select whether to append the configured management domain name to
the configured trap names. For example, if dnsMgmtDomainName is
set to 'example.com', ntpServer is set to 'ntp', and ntpDomainNameAppend
is set to appendDomain, the ntpServer name used would be 'ntp.example.com'."
::={whispApsDNS 1}
ntpServer1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP Server 1 Address.
Format is either an IP address or DNS name."
::={whispApsDNS 2}
ntpServer2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP Server 2 Address.
Format is either an IP address or DNS name."
::={whispApsDNS 3}
ntpServer3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP Server 3 Address.
Format is either an IP address or DNS name."
::={whispApsDNS 4}
dhcprDomainNameAppend OBJECT-TYPE
SYNTAX INTEGER {
disableDomain(0),
appendDomain(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select whether to append the configured management domain name to
the configured trap names. For example, if dnsMgmtDomainName is
set to 'example.com', dhcprServer is set to 'dhcpr', and dhcprDomainNameAppend
is set to appendDomain, the dhcprServer name used would be 'dhcpr.example.com'."
::={whispApsDNS 5}
dhcprServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Server IP which will be used for forwarding DHCP messages
by the DHCP Relay Agent in the MultiPoint AP.
- Format is either an IP address or DNS name.
- Default is 255.255.255.255 (broadcast)."
::={whispApsDNS 6}
authDomainNameAppend OBJECT-TYPE
SYNTAX INTEGER {
disableDNSDomain(0),
enableDNSDomain(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select whether to append the configured management domain name to
the configured trap names. For example, if dnsMgmtDomainName is
set to 'example.com', authServer1 is set to 'auth1', and authDomainNameAppend
is set to appendDomain, the authServer1 name used would be 'auth1.example.com'."
::={whispApsDNS 7}
authServer1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Server 1.
Format is either an IP address or DNS name."
::={whispApsDNS 8}
authServer2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Server 2.
Format is either an IP address or DNS name."
::={whispApsDNS 9}
authServer3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Server 3.
Format is either an IP address or DNS name."
::={whispApsDNS 10}
authServer4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Server 4.
Format is either an IP address or DNS name."
::={whispApsDNS 11}
authServer5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Server 5.
Format is either an IP address or DNS name."
::={whispApsDNS 12}
acctDomainNameAppend OBJECT-TYPE
SYNTAX INTEGER {
disableDomain(0),
appendDomain(1)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Obsoleted. Use whispApsDNS.authDomainNameAppend."
::={whispApsDNS 13}
clearLinkTableStats OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to a nonzero value will clear the link table stats."
::={whispApsControls 1}
whispApsRFConfigRadios OBJECT-TYPE
SYNTAX SEQUENCE OF WhispApsRFConfigRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Radio configuration table."
::= {whispApsRFConfig 1}
whispApsRFConfigRadioEntry OBJECT-TYPE
SYNTAX WhispApsRFConfigRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Radio configuration entry."
AUGMENTS {whispBoxRFPhysicalRadioEntry}
::= {whispApsRFConfigRadios 1}
WhispApsRFConfigRadioEntry ::= SEQUENCE{
radioFreqCarrier INTEGER,
radioDownlinkPercent INTEGER,
radioMaxRange INTEGER,
radioControlSlots INTEGER,
radioTransmitOutputPower INTEGER,
radioColorCode INTEGER
}
radioFreqCarrier OBJECT-TYPE
SYNTAX INTEGER {
wired(0)}
UNITS "kHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RF Frequency. Please see the whispBoxRFPhysicalRadioFrequencies SNMP table for a list of available
frequencies.
0: wired."
::={whispApsRFConfigRadioEntry 1}
radioDownlinkPercent OBJECT-TYPE
SYNTAX INTEGER (1..99)
UNITS "%"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the percentage of frame data space allocated for downlink."
::={whispApsRFConfigRadioEntry 2}
radioMaxRange OBJECT-TYPE
SYNTAX INTEGER
UNITS "miles"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Access point max range."
::={whispApsRFConfigRadioEntry 3}
radioControlSlots OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total number of control slots for HW Scheduling Point-to-Mulitpoint mode (Not applicable for PtoP radios).
For PMP450 the minimum is 1 control slot, others minimum is zero.
Maximum control slots is 15."
::={whispApsRFConfigRadioEntry 4}
radioTransmitOutputPower OBJECT-TYPE
SYNTAX INTEGER
UNITS "dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmitter output power."
::={whispApsRFConfigRadioEntry 5}
radioColorCode OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Color code."
::={whispApsRFConfigRadioEntry 6}
whispLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF WhispLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of link test results"
::= {whispAps 4}
whispLinkEntry OBJECT-TYPE
SYNTAX WhispLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of link test results"
INDEX {linkLUID}
::= {whispLinkTable 1}
WhispLinkEntry ::= SEQUENCE{
linkLUID INTEGER,
linkDescr DisplayString,
linkPhysAddress PhysAddress,
linkMtu INTEGER,
linkSpeed Gauge32,
linkOperStatus INTEGER,
linkInOctets Counter32,
linkInUcastPkts Counter32,
linkInNUcastPkts Counter32,
linkInDiscards Counter32,
linkInError Counter32,
linkInUnknownProtos Counter32,
linkOutOctets Counter32,
linkOutUcastPkts Counter32,
linkOutNUcastPkts Counter32,
linkOutDiscards Counter32,
linkOutError Counter32,
linkOutQLen Gauge32,
linkSessState INTEGER,
linkESN PhysAddress,
linkRSSI INTEGER,
linkAveJitter Gauge32,
linkLastJitter Gauge32,
linkAirDelay INTEGER,
linkRegCount INTEGER,
linkReRegCount INTEGER,
linkTimeOut INTEGER,
linkLastRSSI INTEGER,
sessionCount INTEGER,
softwareVersion DisplayString,
softwareBootVersion DisplayString,
fpgaVersion DisplayString,
linkSiteName DisplayString,
avgPowerLevel DisplayString,
lastPowerLevel DisplayString,
sesDownLinkRate INTEGER,
sesDownLinkLimit INTEGER,
sesUpLinkRate INTEGER,
sesUpLinkLimit INTEGER,
adaptRate DisplayString,
sesLoUpCIR INTEGER,
sesLoDownCIR INTEGER,
sesHiUpCIR INTEGER,
sesHiDownCIR INTEGER,
platformVer INTEGER,
smSessionTmr TimeTicks,
smSessionSeqNumMismatch Counter32,
dataVCNum INTEGER,
hiPriQEn INTEGER,
dataVCNumHiQ INTEGER,
linkInOctetsHiQ Counter32,
linkInUcastPktsHiQ Counter32,
linkInNUcastPktsHiQ Counter32,
linkInDiscardsHiQ Counter32,
linkInErrorHiQ Counter32,
linkInUnknownProtosHiQ Counter32,
linkOutOctetsHiQ Counter32,
linkOutUcastPktsHiQ Counter32,
linkOutNUcastPktsHiQ Counter32,
linkOutDiscardsHiQ Counter32,
linkOutErrorHiQ Counter32,
vcQOverflow Counter32,
vcQOverflowHiQ Counter32,
p7p8HiPriQEn INTEGER,
p7p8HiPriQ Counter32,
linkAirDelayns INTEGER,
linkQualityAPData DisplayString,
linkManagementIP IpAddress,
linkFragmentsReceived1XVertical Counter32,
linkFragmentsReceived2XVertical Counter32,
linkFragmentsReceived3XVertical Counter32,
linkFragmentsReceived4XVertical Counter32,
signalToNoiseRatioVertical INTEGER,
radiusReplyMsg DisplayString,
autoUpdateStatus INTEGER,
radiusFramedIPAddress IpAddress,
radiusFramedIPNetmask IpAddress,
radiusDefaultGateway IpAddress,
linkFragmentsReceived1XHorizontal Counter32,
linkFragmentsReceived2XHorizontal Counter32,
linkFragmentsReceived3XHorizontal Counter32,
linkFragmentsReceived4XHorizontal Counter32,
signalToNoiseRatioHorizontal INTEGER,
linkSignalStrengthRatio DisplayString,
linkRadioDbmHorizontal DisplayString,
linkRadioDbmVertical DisplayString,
maxSMTxPwr INTEGER,
productType INTEGER,
linkAdaptRateLowPri INTEGER,
linkAdaptRateHighPri INTEGER
}
linkLUID OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LUID number."
::={whispLinkEntry 1}
linkDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing information about the
unit. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface."
::={whispLinkEntry 2}
linkPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Physical Address of the unit."
::={whispLinkEntry 3}
linkMtu OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that can be sent
on the interface."
::={whispLinkEntry 4}
linkSpeed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's current bandwidth
in bits per second. For interfaces which do not
vary in bandwidth or for those where no accurate
estimation can be made, this object should contain
the nominal bandwidth."
::={whispLinkEntry 5}
linkOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3)}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable is not used."
::={whispLinkEntry 6}
linkInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the
interface, including framing characters."
::={whispLinkEntry 7}
linkInUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of subnetwork-unicast packets
delivered to a higher-layer protocol."
::={whispLinkEntry 8}
linkInNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol."
::={whispLinkEntry 9}
linkInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up
buffer space."
::={whispLinkEntry 10}
linkInError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol."
::={whispLinkEntry 11}
linkInUnknownProtos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol."
::={whispLinkEntry 12}
linkOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the
interface, including framing characters."
::={whispLinkEntry 13}
linkOutUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent."
::={whispLinkEntry 14}
linkOutNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent."
::={whispLinkEntry 15}
linkOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space."
::={whispLinkEntry 16}
linkOutError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets that could not be
transmitted because of errors."
::={whispLinkEntry 17}
linkOutQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets in output packet queue."
::={whispLinkEntry 18}
linkSessState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
inSession(1),
clearing(2),
reRegDnRst(3),
authChal(4),
registering(5),
notInUse(6)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current operational state of an interface.
0 = Idle
1 = In Session
2 = Clearing
3 = Re-registration downlink reset
4 = Authentication Challenge
5 = Registering
6 = Not in use"
::={whispLinkEntry 19}
linkESN OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link Electronic serial number. It is MAC address."
::={whispLinkEntry 20}
linkRSSI OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average RSSI reading of all packets received from an SM. Applicable to FSK radios only."
::={whispLinkEntry 21}
linkAveJitter OBJECT-TYPE
SYNTAX Gauge32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average Jitter reading of all packets received from an SM. Applicable to FSK radios only."
::={whispLinkEntry 22}
linkLastJitter OBJECT-TYPE
SYNTAX Gauge32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last jitter value. Applicable to FSK radios only."
::={whispLinkEntry 23}
linkAirDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current round trip air delay in bits measured between the AP and SM."
::={whispLinkEntry 24}
linkRegCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an SM has registered to an AP."
::={whispLinkEntry 25}
linkReRegCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an SM has tried to register with the AP while it still has
an active session with the AP."
::={whispLinkEntry 26}
linkTimeOut OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link time out."
::={whispLinkEntry 27}
linkLastRSSI OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last RSSI reading of all packets received from an SM. Applicable to FSK radios only."
::={whispLinkEntry 28}
sessionCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"How many times has this mac been in/out of session."
::={whispLinkEntry 29}
softwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The software version of registered SM."
::={whispLinkEntry 30}
softwareBootVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The software boot version of registered SM."
::={whispLinkEntry 31}
fpgaVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FPGA version of registered SM."
::={whispLinkEntry 32}
linkSiteName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The site name of the registered SM."
::={whispLinkEntry 33}
avgPowerLevel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average power level of registered SM.
For systems that support power control, this value can read 'NA' when the AP adjusts the transmit power of a SM
until new packets are received from the SM with it transmitting at its new power level.
For MIMO this is the combined receive power."
::={whispLinkEntry 34}
lastPowerLevel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last power level of registered SM.
For MIMO radios this is the combined receive power."
::={whispLinkEntry 35}
sesDownLinkRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Down link rate."
::={whispLinkEntry 36}
sesDownLinkLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Down link limit."
::={whispLinkEntry 37}
sesUpLinkRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink rate."
::={whispLinkEntry 38}
sesUpLinkLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink limit."
::={whispLinkEntry 39}
adaptRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Adapt rate of registered SM."
::={whispLinkEntry 40}
sesLoUpCIR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Low priority up link CIR."
::={whispLinkEntry 41}
sesLoDownCIR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Low priority down link CIR."
::={whispLinkEntry 42}
sesHiUpCIR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High priority up link CIR."
::={whispLinkEntry 43}
sesHiDownCIR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High priority down link CIR."
::={whispLinkEntry 44}
platformVer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Platform Version."
::={whispLinkEntry 45}
smSessionTmr OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SM session uptime"
::={whispLinkEntry 46}
smSessionSeqNumMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of how many sequence number mismatch between the AP/BHM and the SM/BHS during the authentication
challenge and authentication response messages. This status is only valid in a system where encryption is
enabled and no authentication server is configured."
::={whispLinkEntry 47}
dataVCNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The normal priority Data VC number in use for this link."
::={whispLinkEntry 48}
hiPriQEn OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns whether High Priority channel is enabled. On P7/P8 devices will return 0 always. Use p7p8HiPriQEn OID for P7/P8 radios."
::={whispLinkEntry 49}
dataVCNumHiQ OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high priority Data VC number in use for this link, if any. If 0, no High Priority channel is in place."
::={whispLinkEntry 50}
linkInOctetsHiQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on High Priority Queue, including framing characters."
::={whispLinkEntry 51}
linkInUcastPktsHiQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of subnetwork-unicast packets on High Priority Queue
delivered to a higher-layer protocol."
::={whispLinkEntry 52}
linkInNUcastPktsHiQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets on High Priority Queue
delivered to a higher-layer protocol."
::={whispLinkEntry 53}
linkInDiscardsHiQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets on High Priority Queue which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up
buffer space."
::={whispLinkEntry 54}
linkInErrorHiQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets on High Priority Queue that contained
errors preventing them from being deliverable to a
higher-layer protocol."
::={whispLinkEntry 55}
linkInUnknownProtosHiQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received on High Priority Queue via the interface
which were discarded because of an unknown or
unsupported protocol."
::={whispLinkEntry 56}
linkOutOctetsHiQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets on High Priority Queue transmitted out of the
interface, including framing characters."
::={whispLinkEntry 57}
linkOutUcastPktsHiQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets on High Priority Queue that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent."
::={whispLinkEntry 58}
linkOutNUcastPktsHiQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets on High Priority Queue that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent."
::={whispLinkEntry 59}
linkOutDiscardsHiQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets on High Priority Queue which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space."
::={whispLinkEntry 60}
linkOutErrorHiQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets on High Priority Queue that could not be
transmitted because of errors."
::={whispLinkEntry 61}
vcQOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets dropped due to Queue overflow on VC."
::={whispLinkEntry 62}
vcQOverflowHiQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets dropped due to Queue overflow on High Priority VC, if enabled."
::={whispLinkEntry 63}
p7p8HiPriQEn OBJECT-TYPE
SYNTAX INTEGER {
disabled-or-NA(0),
enabled(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns whether P7/P8 hi priority channel is enabled. On non-P7/P8 devices will return 0 always."
::={whispLinkEntry 64}
p7p8HiPriQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hi Priority Queue statistics for P7 or P8 radios, if enabled. If not enabled, or not a P7 or P8, will return 0."
::={whispLinkEntry 65}
linkAirDelayns OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current round trip air delay in nanoseconds measured between the AP and SM."
::={whispLinkEntry 66}
linkQualityAPData OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current link quality of the SM's data from the AP.
This is relative to the current modulation rate (1X, 2X, 3X, etc)."
::={whispLinkEntry 67}
linkManagementIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Management IP Address of the unit. 0 indicates SM is not publically addressable."
::={whispLinkEntry 69}
linkFragmentsReceived1XVertical OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 1x (QPSK) modulation.
For GenII OFDM and forward.
For MIMO this is the vertical path."
::={whispLinkEntry 70}
linkFragmentsReceived2XVertical OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 2x (16-QAM) modulation.
For GenII OFDM and forward.
For MIMO this is the vertical path."
::={whispLinkEntry 71}
linkFragmentsReceived3XVertical OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 3x (64-QAM) modulation.
For GenII OFDM and forward.
For MIMO this is the vertical path."
::={whispLinkEntry 72}
linkFragmentsReceived4XVertical OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 4x (256-QAM) modulation.
For GenII OFDM and forward.
For MIMO this is the vertical path."
::={whispLinkEntry 73}
signalToNoiseRatioVertical OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Estimate of the receive signal to noise ratio in dB.
For GenII OFDM and forward.
For MIMO this is the vertical path."
::={whispLinkEntry 74}
radiusReplyMsg OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RADIUS Reply-Msg populated for the SM.
This is only valid when using a backen AAA server."
::={whispLinkEntry 75}
autoUpdateStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status of the auto update process"
::={whispLinkEntry 76}
radiusFramedIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Attribute indicates the IP address to be configured for the SM management interface."
::={whispLinkEntry 77}
radiusFramedIPNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Attribute indicates the netmask to be configured for the SM management interface."
::={whispLinkEntry 78}
radiusDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This Attribute indicates the default gateway to be configured for the SM management interface."
::={whispLinkEntry 79}
linkFragmentsReceived1XHorizontal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 1x (QPSK) modulation.
For MIMO only.
For MIMO this is the horizontal path."
::={whispLinkEntry 80}
linkFragmentsReceived2XHorizontal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 2x (16-QAM) modulation.
For MIMO only.
For MIMO this is the horizontal path."
::={whispLinkEntry 81}
linkFragmentsReceived3XHorizontal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 3x (64-QAM) modulation.
For MIMO only.
For MIMO this is the horizontal path."
::={whispLinkEntry 82}
linkFragmentsReceived4XHorizontal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engineering use only.
Number of fragments received in 4x (256-QAM) modulation.
For MIMO only.
For MIMO this is the horizontal path."
::={whispLinkEntry 83}
signalToNoiseRatioHorizontal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Estimate of the receive signal to noise ratio in dB.
MIMO radios only.
For MIMO this is the horizontal path."
::={whispLinkEntry 84}
linkSignalStrengthRatio OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) -
power received by the horizontal antenna input (dB).
MIMO radios only."
::={whispLinkEntry 86}
linkRadioDbmHorizontal OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive power level of the horizontal antenna in dBm.
MIMO radios only."
::={whispLinkEntry 87}
linkRadioDbmVertical OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive power level of the vertical antenna in dBm.
MIMO radios only."
::={whispLinkEntry 88}
maxSMTxPwr OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns whether SM is transmitting at its configured max power level."
::={whispLinkEntry 89}
productType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
pmp450MIMOOFDM(1),
pmp430SISOOFDM(2),
pmp450SISOOFDM(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns which type of product the SM is.
PMP450 APs only."
::={whispLinkEntry 90}
linkAdaptRateLowPri OBJECT-TYPE
SYNTAX INTEGER {
noSession(0),
rate1X(1),
rate2X(2),
rete3X(3),
rate4X(4),
rate6X(6),
rate8X(8)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current transmitting rate of the low priority VC.
0 : SM is not in session
1 : 1X QPSK SISO
2 : 2X 16-QAM SISO or QPSK MIMO
3 : 3X 64-QAM SISO
4 : 4X 256-QAM SISO or 16-QAM MIMO
6 : 6X 64-QAM MIMO
8 : 8X 256-QAM MIMO"
::={whispLinkEntry 91}
linkAdaptRateHighPri OBJECT-TYPE
SYNTAX INTEGER {
noHighPriorityChannel(-1),
noSession(0),
rate1X(1),
rate2X(2),
rete3X(3),
rate4X(4),
rate6X(6),
rate8X(8)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current transmitting rate of the high priority VC.
-1 : High Priority Channel not configured
0 : SM is not in session
1 : 1X QPSK SISO
2 : 2X 16-QAM SISO or QPSK MIMO
3 : 3X 64-QAM SISO
4 : 4X 256-QAM SISO or 16-QAM MIMO
6 : 6X 64-QAM MIMO
8 : 8X 256-QAM MIMO"
::={whispLinkEntry 92}
whispFailedRegTable OBJECT-TYPE
SYNTAX SEQUENCE OF WhispFailedRegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of link test results"
::= {whispAps 8}
whispFailedRegEntry OBJECT-TYPE
SYNTAX WhispFailedRegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of Failed ESNs"
INDEX {regFailSeqNum}
::= {whispFailedRegTable 1}
WhispFailedRegEntry ::= SEQUENCE{
regFailSeqNum Counter32,
regFailESN PhysAddress,
regGrantReason INTEGER,
regFailTime TimeTicks,
regFailReasonText DisplayString
}
regGrantReason OBJECT-TYPE
SYNTAX INTEGER {
reggnt-valid(0),
reggnt-outofrange(1),
reggnt-nolUIDS(2),
reggnt-rerange(3),
reggnt-authfail(4),
reggnt-encryptfail(5),
reggnt-poweradjust(6),
reggnt-novcs(7),
reggnt-failvcreserve(8),
reggnt-failvcactive(9),
reggnt-failhivcdata(10),
reggnt-failsmlimit(11),
reggnt-fail95orabove(12)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The registration failure reason"
::={whispFailedRegEntry 1}
regFailESN OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ESN that failed to register"
::={whispFailedRegEntry 2}
regFailTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ticks that occurred when the ESN failed to register"
::={whispFailedRegEntry 3}
regFailSeqNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence when the register failure was given."
::={whispFailedRegEntry 4}
regFailReasonText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The text description of the failure."
::={whispFailedRegEntry 5}
END
Reference in New Issue View Git Blame Copy Permalink