mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
Files
97e36f02d60e4ec4764f483c164bf17fa8b3319c
librenms-librenms/mibs/ENTERASYS-SERVICE-LEVEL-REPORTING-MIB
Adam Amstrong 6b9d05653c move Enterasys mibs to mib root 
git-svn-id: http://www.observium.org/svn/observer/trunk@1569 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-31 12:40:45 +00:00

1637 lines
57 KiB
Plaintext
Raw Blame History

ENTERASYS-SERVICE-LEVEL-REPORTING-MIB DEFINITIONS ::= BEGIN
-- enterasys-service-level-reporting-mib.txt
--
-- Part Number:
--
--
-- This module provides authoritative definitions for Enterasys
-- Networks' Service Level Reporting MIB.
--
-- This module will be extended, as needed.
-- Enterasys Networks reserves the right to make changes in this
-- specification and other information contained in this document
-- without prior notice. The reader should consult Enterasys Networks
-- to determine whether any such changes have been made.
--
-- In no event shall Enterasys Networks be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Enterasys
-- Networks has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Enterasys Networks grants vendors, end-users, and other interested
-- parties a non-exclusive license to use this Specification in
-- connection with the management of Enterasys Networks products.
-- Copyright Aug, 2003 Enterasys Networks, Inc.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32
FROM SNMPv2-SMI
RowStatus, StorageType, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
etsysModules
FROM ENTERASYS-MIB-NAMES;
etsysServiceLevelReportingMIB MODULE-IDENTITY
LAST-UPDATED "200311061515Z" -- Thu Nov 6 15:15 GMT 2003
ORGANIZATION "Enterasys Networks Inc."
CONTACT-INFO
"Postal: Enterasys Networks
50 Minuteman Rd.
Andover, MA 01810-1008
USA
Phone: +1 978 684 1000
E-mail: support@enterasys.com
WWW: http://www.enterasys.com"
DESCRIPTION
"This memo defines a portion of the Management Information Base
(MIB) for use with network management protocols in TCP/IP-based
internets. In particular, it specifies the objects used for
managing the results of the service level metrics measurements."
REVISION "200311061515Z" -- Thu Nov 6 15:15 GMT 2003
DESCRIPTION "Corrected the postal code in the CONTACT-INFO clause."
REVISION "200310241902Z" -- Fri Oct 24 19:02 GMT 2003
DESCRIPTION "Changed the name of the bit at position zero in the
EtsysSrvcLvlStandardMetrics textual convention from
'none' to 'reserved' and added a comment for it in
the description clause."
REVISION "200310222332Z" -- Wed Oct 22 23:32 GMT 2003
DESCRIPTION "Initial version of this MIB module."
::= { etsysModules 39 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
EtsysSrvcLvlOwnerString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An OwnerString. The string length is limited to 32 octets."
SYNTAX OCTET STRING (SIZE (0..32))
TimeUnit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A enumerated list of time units."
SYNTAX INTEGER {
year(1),
month(2),
week(3),
day(4),
hour(5),
second(6),
millisecond(7),
microsecond(8),
nanosecond(9)
}
EtsysSrvcLvlStandardMetrics ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Each standard metric is identified below. In order to allow for
several metrics to be calculated in a single measure, there is a
need to describe in a bit string the metrics to be measured.
This textual convention defines a BITS construct that gathers in
a bit string a sequence of bits. The bit order corresponds to the
order of the metric identifiers in the registry.
The first bit (most significant bit) of the string has the index
0. The index 1 corresponds to the first metric of the registry
(instantaneousUnidirectionalConnectivity ).
Example:
One-way-Delay(6) is identified as 6. One-way-Packet-Loss(12) is
as 12. A network measure performing both One-way-Delay(6) and
One-way-Packet-Loss(12) will be described as '0000001000001000'b,
'208'B.
Below is a list of defined metrics:
reserved (0)
Setting this reserved bit has no effect.
instantUnidirectionConnectivity (1)
The identifier for the Type-P-Instantaneous-Unidirectional-
Connectivity metric.
REFERENCE RFC2678, section 2.
instantBidirectionConnectivity (2)
The identifier for the Type-P-Instantaneous-Bidirectional-
Connectivity metric.
REFERENCE RFC2678, section 3.
intervalUnidirectionConnectivity (3)
The identifier for the Type-P-Interval-Unidirectional-
Connectivity metric.
REFERENCE RFC2678, section 4.
intervalBidirectionConnectivity (4)
The identifier for the Type-P-Interval-Bidirectional-
Connectivity metric.
REFERENCE RFC2678, section 5.
intervalTemporalConnectivity (5)
The identifier for the Type-P1-P2-Interval-Temporal-
Connectivity metric.
REFERENCE RFC2678, section 6.
oneWayDelay (6)
The identifier for the Type-P-One-way-Delay metric.
REFERENCE RFC2679, section 3.
oneWayDelayPoissonStream (7)
The identifier for the Type-P-One-way-Delay-Poisson-Stream
metric.
REFERENCE RFC2679, section 4.
oneWayDelayPercentile (8)
The identifier for the Type-P-One-way-Delay-Percentile
metric.
REFERENCE RFC2679, section 5.1.
oneWayDelayMedian (9)
The identifier for the Type-P-One-way-Delay-Median metric.
REFERENCE RFC2679, section 5.2.
oneWayDelayMinimum (10)
The identifier for the Type-P-One-way-Delay-Minimum metric.
REFERENCE RFC2679, section 5.3.
oneWayDelayInversePercentile (11)
The identifier for the Type-P-One-way-Delay-Inverse-
Percentile metric.
REFERENCE RFC2679, section 5.4.
oneWayPacketLoss (12)
The identifier for the Type-P-One-way-Packet-Loss metric.
REFERENCE RFC2680, section 2.
oneWayPacketLossPoissonStream (13)
The identifier for the Type-P-One-way-Packet-Loss-Poisson-
Stream metric.
REFERENCE RFC2680, section 3.
oneWayPacketLossAverage (14)
The identifier for the Type-P-One-way-Packet-Loss-Average
metric.
REFERENCE RFC2680, section 4.
roundtripDelay (15)
The identifier for the Type-P-Round-trip-Delay metric.
REFERENCE section 2 of the rfc2681.
roundtripDelayPoissonStream (16)
The identifier for the Type-P-Round-trip-Delay-Poisson-Stream
metric.
REFERENCE RFC2681, section 4.
roundtripDelayPercentile (17)
The identifier for the Type-P-Round-trip-Delay-Percentile
metric.
REFERENCE RFC2681, section 4.1.
roundtripDelayMedian (18)
The identifier for the Type-P-Round-trip-Delay-Median metric.
REFERENCE RFC2681, section 4.2.
roundtripDelayMinimum (19)
The identifier for the Type-P-Round-trip-Delay-Minimum
metric.
REFERENCE RFC2681, section 4.3.
roundtripDelayInversePercentile (20)
The identifier for the Type-P-Round-trip-Inverse-Percentile
metric.
REFERENCE RFC2681, section 4.4.
oneWayLossDistanceStream (21)
The identifier for the Type-P-One-Way-Loss-Distance-Stream
metric.
REFERENCE RFC3357, section 5.4.1.
oneWayLossPeriodStream (22)
The identifier for the Type-P-One-Way-Loss-Period-Stream
metric.
REFERENCE RFC3357, section 5.4.2.
oneWayLossNoticeableRate (23)
The identifier for the Type-P-One-Way-Loss-Noticeable-Rate
metric.
REFERENCE RFC3357, section 6.1.
oneWayLossPeriodTotal (24)
The identifier for the Type-P-One-Way-Loss-Period-Total
metric.
REFERENCE RFC3357, section 6.2.
oneWayLossPeriodLengths (25)
The identifier for the Type-P-One-Way-Loss-Period-Lengths
metric.
REFERENCE RFC3357, section 6.3.
oneWayInterLossPeriodLengths (26)
The identifier for the Type-P-One-Way-Inter-Loss-Period-
Lengths metric.
REFERENCE RFC3357, section 6.4.
oneWayIpdv (27)
The identifier for the Type-P-One-way-ipdv metric.
REFERENCE RFC3393, section 2.
oneWayIpdvPoissonStream (28)
The identifier for the Type-P-One-way-ipdv-Poisson-stream
metric.
REFERENCE RFC3393, section 3.
oneWayIpdvPercentile (29)
The identifier for the Type-P-One-way-ipdv-percentile metric.
REFERENCE RFC3393, section 4.3.
oneWayIpdvInversePercentile (30)
The identifier for the Type-P-One-way-ipdv-inverse-percentile
metric.
REFERENCE RFC3393, section 4.4.
oneWayIpdvJitter (31)
The identifier for the Type-P-One-way-ipdv-jitter metric.
REFERENCE RFC3393, section 4.5.
oneWayPeakToPeakIpdv (32)
The identifier for the Type-P-One-way-peak-to-peak-ipdv
metric.
REFERENCE RFC3393, section 4.6.
oneWayDelayPeriodicStream (33)
The identifier for the Type-P-One-way-Delay-Periodic-Stream
metric.
REFERENCE RFC3432, section 4.
roundtripDelayAverage (34)
The identifier for the Type-P-Round-trip-Delay-Average
metric.
roundtripPacketLoss (35)
The identifier for the Type-P-Round-trip-Packet-Loss metric.
roundtripPacketLossAverage (36)
The identifier for the Type-P-Round-trip-Packet-Loss-Average
metric.
roundtripIpdv (37)
The identifier for the Type-P-Round-trip-ipdv metric."
SYNTAX BITS {
reserved (0),
instantUnidirectionConnectivity (1),
instantBidirectionConnectivity (2),
intervalUnidirectionConnectivity (3),
intervalBidirectionConnectivity (4),
intervalTemporalConnectivity (5),
oneWayDelay (6),
oneWayDelayPoissonStream (7),
oneWayDelayPercentile (8),
oneWayDelayMedian (9),
oneWayDelayMinimum (10),
oneWayDelayInversePercentile (11),
oneWayPacketLoss (12),
oneWayPacketLossPoissonStream (13),
oneWayPacketLossAverage (14),
roundtripDelay (15),
roundtripDelayPoissonStream (16),
roundtripDelayPercentile (17),
roundtripDelayMedian (18),
roundtripDelayMinimum (19),
roundtripDelayInversePercentile (20),
oneWayLossDistanceStream (21),
oneWayLossPeriodStream (22),
oneWayLossNoticeableRate (23),
oneWayLossPeriodTotal (24),
oneWayLossPeriodLengths (25),
oneWayInterLossPeriodLengths (26),
oneWayIpdv (27),
oneWayIpdvPoissonStream (28),
oneWayIpdvPercentile (29),
oneWayIpdvInversePercentile (30),
oneWayIpdvJitter (31),
oneWayPeakToPeakIpdv (32),
oneWayDelayPeriodicStream (33),
roundtripDelayAverage (34),
roundtripPacketLoss (35),
roundtripPacketLossAverage (36),
roundtripIpdv (37)
}
GMTTimeStamp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value at which a specific occurrence happened. The specific
occurrence must be defined in the description of any object
defined using this type.
field octets contents range
----- ------ -------- -----
1 1-4 second since 1 Jan 2000 0H00* 0..2^31 - 1
2 5-8 fractional part of the second* 0..2^32 - 1
* the value is in network-byte order
The timestamp format is directly inspired from the NTP timestamp
format.
It differs because it counts the second since 1 Jan 2000 0H00
instead of 1 Jan 1900 0H00. The most significant bit of the part
that represents the second is reserved. It will wrap in year 2068
(The NTP timestamp will wrap in year 2036).
This bit is set to indicate if the fractional part of the second
contains a precision field and a synchronization field.
When this bit is not set the resolution is maximal.
The maximal resolution is close to 250 picoseconds.
The precision of the timestamp is provided in
etsysSrvcLvlSystemClockResolution."
SYNTAX OCTET STRING (SIZE (8))
TypeP ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention is a display string used to describe the
protocol encapsulation list of a packet, and is used as the value
of the SYNTAX clause for the type of the Src and Dst of a
measure. The RFC2895 specifies a macro named PROTOCOL-IDENTIFIER
for the definition of protocol identifiers, while its companion
document, the RFC2896 defines a set of protocol identifiers.
TypeP is defined as a display string. It consists of a list of
dot separated protocol names. Each protocol name has been
previously defined using the macro PROTOCOL-IDENTIFIER of the RFC
2895.
Examples:
The RFC2896 defines the protocol identifiers 'ether2', 'ip',
'ipip4', 'udp', 'tcp', 'telnet'...
The TypeP of the source address corresponding to telnet is the
string 'ip.tcp.telnet'.
The TypeP of the source address corresponding to UDP packets sent
in an IP tunnel is the string 'ip.ipip4.udp'.
Note:
A performance measure is active, so generally a TypeP value does
not describe the link layer (i.e. ether2...). Valid Internet
packets are sent from Src to Dst. Then the choice of the link
layer relies on the Internet stack."
SYNTAX OCTET STRING (SIZE (0..512))
TypePaddress ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"This textual convention is a Display string used to describe the
parameters of the protocol encapsulation list of a packet,
basically the address.
TypePaddress is defined as a display string. It consists in a
list of space separated parameter list. Each parameter in the
list corresponds to a parameter of a PROTOCOL-IDENTIFIER of the
TypeP.
Example:
The TypeP 'ip.ipip4' has 2 parameters. A valid TypePaddress value
is '192.168.1.1 128.2.6.7'."
SYNTAX OCTET STRING (SIZE (0..512))
-- -------------------------------------------------------------
-- MIB Objects
-- -------------------------------------------------------------
etsysSrvcLvlConfigObjects OBJECT IDENTIFIER
::= { etsysServiceLevelReportingMIB 1 }
etsysSrvcLvlSystem OBJECT IDENTIFIER
::= { etsysSrvcLvlConfigObjects 1 }
etsysSrvcLvlOwners OBJECT IDENTIFIER
::= { etsysSrvcLvlConfigObjects 2 }
etsysSrvcLvlHistory OBJECT IDENTIFIER
::= { etsysSrvcLvlConfigObjects 3 }
etsysSrvcLvlMeasure OBJECT IDENTIFIER
::= { etsysSrvcLvlConfigObjects 4 }
-- -------------------------------------------------------------
-- etsysSrvcLvlSystem Group
-- -------------------------------------------------------------
etsysSrvcLvlSystemTime OBJECT-TYPE
SYNTAX GMTTimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current time of the system."
::= { etsysSrvcLvlSystem 1 }
etsysSrvcLvlSystemClockResolution OBJECT-TYPE
SYNTAX Integer32
UNITS "picoseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"etsysSrvcLvlSystemClockResolution provides the precision of the
clock used for the measures . The unit is the picosecond. For
example, the clock on an old Unix host might advance only once
every msec, and thus have a resolution of 1 msec. So its
resolution is 1,000,000,000 picosecond and the value of
etsysSrvcLvlSystemClockResolution is 1000000000."
::= { etsysSrvcLvlSystem 2 }
etsysSrvcLvlMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysSrvcLvlMetricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is mandatory. It describes the current
implementation. Each defined metric must be described
in the table.
etsysSrvcLvlMetricTable content is read only."
::= { etsysSrvcLvlSystem 3 }
etsysSrvcLvlMetricEntry OBJECT-TYPE
SYNTAX EtsysSrvcLvlMetricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry describes the static capabilities of a metric
implementation."
INDEX { etsysSrvcLvlMetricIndex }
::= { etsysSrvcLvlMetricTable 1 }
EtsysSrvcLvlMetricEntry ::=
SEQUENCE {
etsysSrvcLvlMetricIndex INTEGER,
etsysSrvcLvlMetricCapabilities INTEGER,
etsysSrvcLvlMetricType INTEGER,
etsysSrvcLvlMetricUnit INTEGER,
etsysSrvcLvlMetricDescription SnmpAdminString
}
etsysSrvcLvlMetricIndex OBJECT-TYPE
SYNTAX INTEGER {
instantUnidirectionConnectivity (1),
instantBidirectionConnectivity (2),
intervalUnidirectionConnectivity (3),
intervalBidirectionConnectivity (4),
intervalTemporalConnectivity (5),
oneWayDelay (6),
oneWayDelayPoissonStream (7),
oneWayDelayPercentile (8),
oneWayDelayMedian (9),
oneWayDelayMinimum (10),
oneWayDelayInversePercentile (11),
oneWayPacketLoss (12),
oneWayPacketLossPoissonStream (13),
oneWayPacketLossAverage (14),
roundtripDelay (15),
roundtripDelayPoissonStream (16),
roundtripDelayPercentile (17),
roundtripDelayMedian (18),
roundtripDelayMinimum (19),
roundtripDelayInversePercentile (20),
oneWayLossDistanceStream (21),
oneWayLossPeriodStream (22),
oneWayLossNoticeableRate (23),
oneWayLossPeriodTotal (24),
oneWayLossPeriodLengths (25),
oneWayInterLossPeriodLengths (26),
oneWayIpdv (27),
oneWayIpdvPoissonStream (28),
oneWayIpdvPercentile (29),
oneWayIpdvInversePercentile (30),
oneWayIpdvJitter (31),
oneWayPeakToPeakIpdv (32),
oneWayDelayPeriodicStream (33),
roundtripDelayAverage (34),
roundtripPacketLoss (35),
roundtripPacketLossAverage (36),
roundtripIpdv (37)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"etsysSrvcLvlMetricIndex defines an unambiguous index for each
standardized metric. It identifies a metric. Its value is
defined above. This value is the same in any implementation
of the ENTERASYS-SERVICE-LEVEL-REPORTING-MIB. See
EtsysSrvcLvlStandardMetrics for description of the metrics.
Example:
onewayPacketLossAverage is defined as the 14.
Consequently the index of the metric onewayPacketLossAverage in
the EtsysSrvcLvlMetricTable will always be '14'"
::= { etsysSrvcLvlMetricEntry 1 }
etsysSrvcLvlMetricCapabilities OBJECT-TYPE
SYNTAX INTEGER {
notImplemented(0),
implemented(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of notImplemented implies the metric is not implemented.
A value of implemented implies the metric is implemented."
DEFVAL { implemented }
::= { etsysSrvcLvlMetricEntry 2 }
etsysSrvcLvlMetricType OBJECT-TYPE
SYNTAX INTEGER {
network(0),
aggregated(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the metric type, whether it is network or aggregated"
DEFVAL { aggregated }
::= { etsysSrvcLvlMetricEntry 3 }
etsysSrvcLvlMetricUnit OBJECT-TYPE
SYNTAX INTEGER {
noUnit(0),
second(1),
millisecond(2),
microsecond(3),
nanosecond(4),
percentage(5),
packet(6),
byte(7),
kilobyte(8),
megabyte(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unit used in the current entity for the results of the
measurement of this metric."
::= { etsysSrvcLvlMetricEntry 4 }
etsysSrvcLvlMetricDescription OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the metric implementation following
the exact name of this metric in the registry. For example:
oneWayDelay: text ."
::= { etsysSrvcLvlMetricEntry 5 }
-- -------------------------------------------------------------
-- etsysSrvcLvlOwners Group
-- -------------------------------------------------------------
--
-- The etsysSrvcLvlOwners objects are responsible for managing
-- the owners access to the measurements.
--
etsysSrvcLvlOwnersTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysSrvcLvlOwnersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A management entity wishing to create and activate remote
EtsysSrvcLvl measurements in an agent must previously be
registered in the etsysSrvcLvlOwnersTable.
etsysSrvcLvlOwnersTable content is read-create. It contains at
least the owner 'monitor'."
::= { etsysSrvcLvlOwners 1 }
etsysSrvcLvlOwnersEntry OBJECT-TYPE
SYNTAX EtsysSrvcLvlOwnersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The description of the resources granted to an SNMP application.
For example, an instance of etsysSrvcLvlOwnersOwner with an
EtsysSrvcLvlOwnerString 'acme', which represents the 14th owner
created in etsysSrvcLvlOwnersTable would be named
etsysSrvcLvlOwnersEntryOwner.14.
Notes:
The etsysSrvcLvlOwnersIndex value is a local index managed
directly by the agent. The management application must poll to
get the next available index value.
It is not used in anyway in other tables."
INDEX { etsysSrvcLvlOwnersIndex }
::= { etsysSrvcLvlOwnersTable 1 }
EtsysSrvcLvlOwnersEntry ::= SEQUENCE {
etsysSrvcLvlOwnersIndex Integer32,
etsysSrvcLvlOwnersOwner EtsysSrvcLvlOwnerString,
etsysSrvcLvlOwnersGrantedMetrics EtsysSrvcLvlStandardMetrics,
etsysSrvcLvlOwnersQuota Integer32,
etsysSrvcLvlOwnersIpAddressType InetAddressType,
etsysSrvcLvlOwnersIpAddress InetAddress,
etsysSrvcLvlOwnersEmail SnmpAdminString,
etsysSrvcLvlOwnersSMS SnmpAdminString,
etsysSrvcLvlOwnersStatus RowStatus
}
etsysSrvcLvlOwnersIndex OBJECT-TYPE
SYNTAX Integer32 (1.. 65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary index that identifies an entry in the owners
table."
::= { etsysSrvcLvlOwnersEntry 1 }
etsysSrvcLvlOwnersOwner OBJECT-TYPE
SYNTAX EtsysSrvcLvlOwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The owner described by this entry."
::= { etsysSrvcLvlOwnersEntry 2 }
etsysSrvcLvlOwnersGrantedMetrics OBJECT-TYPE
SYNTAX EtsysSrvcLvlStandardMetrics
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines the metrics granted to an owner for which measurements
can be performed."
::= { etsysSrvcLvlOwnersEntry 3 }
etsysSrvcLvlOwnersQuota OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of records that this owner may have in the
history table."
::= { etsysSrvcLvlOwnersEntry 4 }
etsysSrvcLvlOwnersIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address type of the management entity corresponding to
this owner.
InetAddressType is restricted to ipv4(1),ipv6(2)and dns(16)."
::= { etsysSrvcLvlOwnersEntry 5 }
etsysSrvcLvlOwnersIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (1..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the management entity corresponding to this
owner."
::= { etsysSrvcLvlOwnersEntry 6 }
etsysSrvcLvlOwnersEmail OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The email address of the management entity corresponding to this
owner."
::= { etsysSrvcLvlOwnersEntry 7 }
etsysSrvcLvlOwnersSMS OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The SMS phone number of the management entity corresponding to
this owner."
::= { etsysSrvcLvlOwnersEntry 8 }
etsysSrvcLvlOwnersStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry."
::= { etsysSrvcLvlOwnersEntry 9 }
-- -------------------------------------------------------------
-- etsysSrvcLvlHistory Group
-- -------------------------------------------------------------
-- -------------------------------------------------------------
-- etsysSrvcLvlHistoryTable
-- -------------------------------------------------------------
etsysSrvcLvlHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysSrvcLvlHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing the measurement results."
::= { etsysSrvcLvlHistory 1 }
etsysSrvcLvlHistoryEntry OBJECT-TYPE
SYNTAX EtsysSrvcLvlHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An etsysSrvcLvlHistoryEntry entry is one of the results of a
measure identified by etsysSrvcLvlHistoryMeasureOwner,
etsysSrvcLvlHistoryMeasureIndex, etsysSrvcLvlHistoryMetricIndex
and etsysSrvcLvlHistoryIndex.
In the index :
+ etsysSrvcLvlHistoryMeasureOwner identifies the owner of the
measure
+ etsysSrvcLvlHistoryMeasureIndex identifies the measure in the
owner namespace
+ etsysSrvcLvlHistoryMetricIndex identifies the metric measured
by the measure. The metric is described in the corresponding
entry of the n etsysSrvcLvlMetricTable
+ etsysSrvcLvlHistoryIndex is the local index of the result on
the history table."
INDEX { etsysSrvcLvlHistoryMeasureOwner,
etsysSrvcLvlHistoryMeasureIndex, etsysSrvcLvlHistoryMetricIndex,
etsysSrvcLvlHistoryIndex }
::= { etsysSrvcLvlHistoryTable 1 }
EtsysSrvcLvlHistoryEntry ::=
SEQUENCE {
etsysSrvcLvlHistoryMeasureOwner EtsysSrvcLvlOwnerString,
etsysSrvcLvlHistoryMeasureIndex Integer32,
etsysSrvcLvlHistoryMetricIndex Integer32,
etsysSrvcLvlHistoryIndex Integer32,
etsysSrvcLvlHistorySequence Integer32,
etsysSrvcLvlHistoryTimestamp GMTTimeStamp,
etsysSrvcLvlHistoryValue Integer32
}
etsysSrvcLvlHistoryMeasureOwner OBJECT-TYPE
SYNTAX EtsysSrvcLvlOwnerString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The owner of the measure that produced this result."
::= { etsysSrvcLvlHistoryEntry 1 }
etsysSrvcLvlHistoryMeasureIndex OBJECT-TYPE
SYNTAX Integer32 (1.. 65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The index (in owner's namespace) of the measure that produced
this result."
::= { etsysSrvcLvlHistoryEntry 2 }
etsysSrvcLvlHistoryMetricIndex OBJECT-TYPE
SYNTAX Integer32 (1.. 65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" etsysSrvcLvlHistoryMetricIndex identifies the metric measured
by the measure. The metric is described in the corresponding
entry of the etsysSrvcLvlMetricTable."
::= { etsysSrvcLvlHistoryEntry 3 }
etsysSrvcLvlHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1.. 65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A local index that identifies a result in the history table."
::= { etsysSrvcLvlHistoryEntry 4 }
etsysSrvcLvlHistorySequence OBJECT-TYPE
SYNTAX Integer32 (0.. 65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"etsysSrvcLvlHistorySequence is the sequence index of the
measurement results for a metric.
Network metrics:
It's the sequence index of a measurement packet. Typically, it
identifies the order of the packet in the stream of packets sends
by the source.
Aggregated metrics:
It is the sequence index of the computed aggregated metric
result."
::= { etsysSrvcLvlHistoryEntry 5 }
etsysSrvcLvlHistoryTimestamp OBJECT-TYPE
SYNTAX GMTTimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp when the measurement occurred."
::= { etsysSrvcLvlHistoryEntry 6 }
etsysSrvcLvlHistoryValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The observed value of the measurement."
::= { etsysSrvcLvlHistoryEntry 7 }
-- -------------------------------------------------------------
-- etsysSrvcLvlMeasure Group
-- -------------------------------------------------------------
-- -------------------------------------------------------------
-- etsysSrvcLvlNetMeasureTable
-- -------------------------------------------------------------
etsysSrvcLvlNetMeasureTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysSrvcLvlNetMeasureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is a measurement that performs network measures and
provides results.
It performs several metric measurements per packet exchange. Each
step of a measure produces a singleton result per metric. The
time of the measurement and the value of the metric are saved in
the etsysSrvcLvlHistoryTable."
::= { etsysSrvcLvlMeasure 1 }
etsysSrvcLvlNetMeasureEntry OBJECT-TYPE
SYNTAX EtsysSrvcLvlNetMeasureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The EtsysSrvcLvlNetMeasureTable is mandatory.
The etsysSrvcLvlNetMeasureMetrics is set to a list of metrics
to be computed from the same raw packet exchange. Each step of
measurement delivers a singleton per chosen metric. Results are
timestamped and saved in the etsysSrvcLvlHistoryTable.
The etsysSrvcLvlNetMeasureTable typical usage consists in
providing network measure indices in order to allow aggregated
measures to perform aggregation on the results of network
measures."
INDEX { etsysSrvcLvlNetMeasureOwner, etsysSrvcLvlNetMeasureIndex }
::= { etsysSrvcLvlNetMeasureTable 1 }
EtsysSrvcLvlNetMeasureEntry ::= SEQUENCE {
etsysSrvcLvlNetMeasureOwner EtsysSrvcLvlOwnerString,
etsysSrvcLvlNetMeasureIndex Integer32,
etsysSrvcLvlNetMeasureName SnmpAdminString,
etsysSrvcLvlNetMeasureMetrics EtsysSrvcLvlStandardMetrics,
etsysSrvcLvlNetMeasureBeginTime GMTTimeStamp,
etsysSrvcLvlNetMeasureDurationUnit TimeUnit,
etsysSrvcLvlNetMeasureDuration Integer32,
etsysSrvcLvlNetMeasureHistorySize Integer32,
etsysSrvcLvlNetMeasureFailureMgmtMode INTEGER,
etsysSrvcLvlNetMeasureResultsMgmt INTEGER,
etsysSrvcLvlNetMeasureSrcTypeP TypeP,
etsysSrvcLvlNetMeasureSrc TypePaddress,
etsysSrvcLvlNetMeasureDstTypeP TypeP,
etsysSrvcLvlNetMeasureDst TypePaddress,
etsysSrvcLvlNetMeasureTxMode INTEGER,
etsysSrvcLvlNetMeasureTxPacketRateUnit TimeUnit,
etsysSrvcLvlNetMeasureTxPacketRate Integer32,
etsysSrvcLvlNetMeasureDevtnOrBurstSize Integer32,
etsysSrvcLvlNetMeasureMedOrIntBurstSize Integer32,
etsysSrvcLvlNetMeasureLossTimeout Integer32,
etsysSrvcLvlNetMeasureL3PacketSize Integer32,
etsysSrvcLvlNetMeasureDataPattern OCTET STRING,
etsysSrvcLvlNetMeasureMap SnmpAdminString,
etsysSrvcLvlNetMeasureSingletons Integer32,
etsysSrvcLvlNetMeasureOperState INTEGER
}
etsysSrvcLvlNetMeasureOwner OBJECT-TYPE
SYNTAX EtsysSrvcLvlOwnerString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The owner of the network measurement."
::= { etsysSrvcLvlNetMeasureEntry 1 }
etsysSrvcLvlNetMeasureIndex OBJECT-TYPE
SYNTAX Integer32 (1.. 65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index (in owner's namespace) of the network measure. "
::= { etsysSrvcLvlNetMeasureEntry 2 }
etsysSrvcLvlNetMeasureName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the metric instance. It illustrates the specificity
of the metric and includes the metric and the TypeP.
Example:
IP-TCP-HTTP-One-way-Delay: free text "
::= { etsysSrvcLvlNetMeasureEntry 3 }
etsysSrvcLvlNetMeasureMetrics OBJECT-TYPE
SYNTAX EtsysSrvcLvlStandardMetrics
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the metrics to compute within this measure. ONLY network
metrics of the same type are allowed in this field.
A measure may be configured for the result of different metric
singletons to be archived in the etsysSrvcLvlHistoryTable. The
etsysSrvcLvlMetricIndex of the created result has the value of
the bit index of the corresponding etsysSrvcLvlMeasureMetrics as
explained above in the etsysSrvcLvlMetricIndex definition.
Example:
A measure asking for One-way-Delay(6) and One-way-Packet-Loss(12)
generated a flow of singletons which are logged in the
etsysSrvcLvlHistoryTable. The singletons created for the
One-way-Delay measure have a value of etsysSrvcLvlMetricIndex of
6 while the created singletons for the One-way-Packet-Loss
measure have a value of etsysSrvcLvlMetricIndex of 12.
One measure may perform simultaneously
either several network metrics
either several aggregated metrics"
-- { one-way-Delay, one-way-Packet-Loss }
::= { etsysSrvcLvlNetMeasureEntry 4 }
etsysSrvcLvlNetMeasureBeginTime OBJECT-TYPE
SYNTAX GMTTimeStamp
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the time at which the measurement begins."
::= { etsysSrvcLvlNetMeasureEntry 5 }
etsysSrvcLvlNetMeasureDurationUnit OBJECT-TYPE
SYNTAX TimeUnit
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the measurement duration unit."
DEFVAL { second }
::= { etsysSrvcLvlNetMeasureEntry 6 }
etsysSrvcLvlNetMeasureDuration OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the measurement duration."
::= { etsysSrvcLvlNetMeasureEntry 7 }
etsysSrvcLvlNetMeasureHistorySize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of results saved for each metric of
this measure.
Overflow condition will be managed by the object
etsysSrvcLvlNetMeasureResultsMgmt."
::= { etsysSrvcLvlNetMeasureEntry 8 }
etsysSrvcLvlNetMeasureFailureMgmtMode OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
manual(2),
discarded(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines whether this row is discarded on failure.
'auto'
the failure is handled automatically depending on the
implementation.
'manual'
the entry should be discarded manually.
'discarded'
the entry is discarded all the time."
DEFVAL { auto }
::= { etsysSrvcLvlNetMeasureEntry 9 }
etsysSrvcLvlNetMeasureResultsMgmt OBJECT-TYPE
SYNTAX INTEGER {
wrap(1),
suspend(2),
delete(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Action to take when the log is full. The user may choose
to either wrap, in which case the agent writes over existing
records. The user may choose to suspend writing to the log in the
event that he wishes to archive the data. The delete action
causes the agent to begin to write in the log, and assumes the
data has been cleared.
This object indicates the way the measurement results are managed
when the owner quota has been exceeded:
'wrap'
continue the measurement and erase the older entries in the
history.
'suspend'
stop the measure and keep the results in the history.
'delete'
remove the results from the history."
::= { etsysSrvcLvlNetMeasureEntry 10 }
etsysSrvcLvlNetMeasureSrcTypeP OBJECT-TYPE
SYNTAX TypeP
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the type P of the source address of the packets sent by
the measure."
DEFVAL { "ip" }
::= { etsysSrvcLvlNetMeasureEntry 11 }
etsysSrvcLvlNetMeasureSrc OBJECT-TYPE
SYNTAX TypePaddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the address of the source of the measure.
It is represented as a list of parameters corresponding to those
of the PROTOCOL IDENTIFIER sets in
etsysSrvcLvlNetMeasureSrcTypeP."
::= { etsysSrvcLvlNetMeasureEntry 12}
etsysSrvcLvlNetMeasureDstTypeP OBJECT-TYPE
SYNTAX TypeP
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the type P of the destination address of the packets
sent by the measure."
DEFVAL { "ip" }
::= { etsysSrvcLvlNetMeasureEntry 13 }
etsysSrvcLvlNetMeasureDst OBJECT-TYPE
SYNTAX TypePaddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the address of the destination of the measure.
It is represented as a list of parameters corresponding to those
of the PROTOCOL IDENTIFIER set in
etsysSrvcLvlNetMeasureDstTypeP."
::= { etsysSrvcLvlNetMeasureEntry 14 }
etsysSrvcLvlNetMeasureTxMode OBJECT-TYPE
SYNTAX INTEGER {
other(0),
periodic(1),
poisson(2),
multiburst(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit mode used to send the packets:
'other'
The rule used to send the packets is unknown.
'periodic'
Packets are sent periodically at
etsysSrvcLvlNetMeasureTxPacketRate rate.
'poisson'
Packets are sent using a Poisson law, the median is the value
of etsysSrvcLvlNetMeasureMedOrIntBurstSize, the deviation is
etsysSrvcLvlNetMeasureDevtnOrBurstSize.
'multiburst'
Packets are sent bursty at etsysSrvcLvlNetMeasureTxPacketRate.
The size of the burst is made of
etsysSrvcLvlNetMeasureDevtnOrBurstSize packets."
::= { etsysSrvcLvlNetMeasureEntry 15 }
etsysSrvcLvlNetMeasureTxPacketRateUnit OBJECT-TYPE
SYNTAX TimeUnit
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet rate unit used to send the packets."
::= { etsysSrvcLvlNetMeasureEntry 16 }
etsysSrvcLvlNetMeasureTxPacketRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate the packets are sent."
::= { etsysSrvcLvlNetMeasureEntry 17 }
etsysSrvcLvlNetMeasureDevtnOrBurstSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the average number of packets per seconds sent using a
poisson law."
::= { etsysSrvcLvlNetMeasureEntry 18 }
etsysSrvcLvlNetMeasureMedOrIntBurstSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"According to the transmit mode, this value indicates the average
number of packets per seconds sent using a poisson law, or the
number of packets to wait between consecutive bursts."
::= { etsysSrvcLvlNetMeasureEntry 19 }
etsysSrvcLvlNetMeasureLossTimeout OBJECT-TYPE
SYNTAX Integer32
UNITS "Milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the delay after which the packet is considered lost
by the sink."
::= { etsysSrvcLvlNetMeasureEntry 20 }
etsysSrvcLvlNetMeasureL3PacketSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the size of the packets counted at the IP network
layer in regards to the TypeP definition.
Example: For a TypeP 'ip ipip4' the L3 size will be the size of
the packet at ipip4 level."
::= { etsysSrvcLvlNetMeasureEntry 21 }
etsysSrvcLvlNetMeasureDataPattern OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The pattern used to fill the payload of the packet."
::= { etsysSrvcLvlNetMeasureEntry 22 }
etsysSrvcLvlNetMeasureMap OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An administrative name of a network management map to which
the measure belongs."
DEFVAL { "" }
::= { etsysSrvcLvlNetMeasureEntry 23 }
etsysSrvcLvlNetMeasureSingletons OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports the number of singletons performed per metric by the
measure since the beginning of the measure. This parameters is
required for aggregation."
::= { etsysSrvcLvlNetMeasureEntry 24 }
etsysSrvcLvlNetMeasureOperState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
running(1),
stopped(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports the operational status of the network measure."
::= { etsysSrvcLvlNetMeasureEntry 25 }
-- -------------------------------------------------------------
-- etsysSrvcLvlAggrMeasureTable
-- -------------------------------------------------------------
etsysSrvcLvlAggrMeasureTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysSrvcLvlAggrMeasureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An aggregated measure summarizes the results of previous
network or aggregated measures. The results may be saved in the
etsysSrvcLvlHistoryTable.
Each step of the calculation for the measure produces a singleton
result per metric."
::= { etsysSrvcLvlMeasure 2 }
etsysSrvcLvlAggrMeasureEntry OBJECT-TYPE
SYNTAX EtsysSrvcLvlAggrMeasureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Typically the configuration operation sets the value of
the EtsysSrvcLvlAggrMeasureEntry.
etsysSrvcLvlAggrMeasureTable is mandatory.
The etsysSrvcLvlAggrMeasureMetrics defines the metric to compute.
The results of the measure to summarize are identified by:
+ etsysSrvcLvlAggrMeasureHistoryOwner,
+ etsysSrvcLvlAggrMeasureHistoryOwnerIndex and
+ etsysSrvcLvlAggrMeasureHistoryMetric
The aggregated task starts at etsysSrvcLvlAggrMeasureBeginTime
and ends after etsysSrvcLvlAggrMeasureDuration. An aggregated
result is performed and saved in the etsysSrvcLvlHistoryTable
for each etsysSrvcLvlAggrMeasureAggrPeriod."
INDEX { etsysSrvcLvlAggrMeasureOwner, etsysSrvcLvlAggrMeasureIndex }
::= { etsysSrvcLvlAggrMeasureTable 1 }
EtsysSrvcLvlAggrMeasureEntry ::= SEQUENCE {
etsysSrvcLvlAggrMeasureOwner EtsysSrvcLvlOwnerString,
etsysSrvcLvlAggrMeasureIndex Integer32,
etsysSrvcLvlAggrMeasureName SnmpAdminString,
etsysSrvcLvlAggrMeasureMetrics EtsysSrvcLvlStandardMetrics,
etsysSrvcLvlAggrMeasureBeginTime GMTTimeStamp,
etsysSrvcLvlAggrMeasureAggrPeriodUnit TimeUnit,
etsysSrvcLvlAggrMeasureAggrPeriod Integer32,
etsysSrvcLvlAggrMeasureDurationUnit TimeUnit,
etsysSrvcLvlAggrMeasureDuration Integer32,
etsysSrvcLvlAggrMeasureHistorySize Integer32,
etsysSrvcLvlAggrMeasureStorageType StorageType,
etsysSrvcLvlAggrMeasureHistoryOwner EtsysSrvcLvlOwnerString,
etsysSrvcLvlAggrMeasureHistoryOwnerIndex Integer32,
etsysSrvcLvlAggrMeasureHistoryMetric Integer32,
etsysSrvcLvlAggrMeasureAdminState INTEGER,
etsysSrvcLvlAggrMeasureMap SnmpAdminString,
etsysSrvcLvlAggrMeasureResultsMgmt INTEGER,
etsysSrvcLvlAggrMeasureStatus RowStatus
}
etsysSrvcLvlAggrMeasureOwner OBJECT-TYPE
SYNTAX EtsysSrvcLvlOwnerString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The owner who has configured this entry."
::= { etsysSrvcLvlAggrMeasureEntry 1 }
etsysSrvcLvlAggrMeasureIndex OBJECT-TYPE
SYNTAX Integer32 (1.. 65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index (in owner's namespace) of the measure. The value is
managed by the owner."
::= { etsysSrvcLvlAggrMeasureEntry 2 }
etsysSrvcLvlAggrMeasureName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the instance of the metric. It illustrates the
specificity of the metric and includes the metric and the typeP.
example: IP-port-HTTP-connectivity"
::= { etsysSrvcLvlAggrMeasureEntry 3 }
etsysSrvcLvlAggrMeasureMetrics OBJECT-TYPE
SYNTAX EtsysSrvcLvlStandardMetrics
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines the metrics to compute within this aggregated measure.
ONLY aggregated metrics of the same type are allowed in this
field.
A measure may be configured for the result of different metric
singletons to be archived in the etsysSrvcLvlHistoryTable. The
etsysSrvcLvlMetricIndex of the created result has the value of
the bit index of the corresponding etsysSrvcLvlAggrMeasureMetrics
as explained above in the etsysSrvcLvlMetricIndex definition.
Example:
A measure asking for One-way-Delay(6) and One-way-Packet-Loss(12)
generated a flow of singletons which are logged in the
etsysSrvcLvlHistoryTable. The singletons created for the
One-way-Delay measure have a value of etsysSrvcLvlMetricIndex of
6 while the created singletons for the One-way-Packet-Loss
measure have a value of etsysSrvcLvlMetricIndex of 12."
::= { etsysSrvcLvlAggrMeasureEntry 4 }
etsysSrvcLvlAggrMeasureBeginTime OBJECT-TYPE
SYNTAX GMTTimeStamp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the time at which the aggregated measure starts."
::= { etsysSrvcLvlAggrMeasureEntry 5 }
etsysSrvcLvlAggrMeasureAggrPeriodUnit OBJECT-TYPE
SYNTAX TimeUnit
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the unit of the aggregated measure period."
DEFVAL { second }
::= { etsysSrvcLvlAggrMeasureEntry 6 }
etsysSrvcLvlAggrMeasureAggrPeriod OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the amount of time between 2 measurement action
intervals. The action is specific to the semantic of the measure.
They are performed periodically on a sequence of results of other
measures. The period corresponds to the interval between two
successive computations of the metric. The value of
etsysSrvcLvlHistoryTimestamp result of a aggregated metric
computed corresponds to the value of the
etsysSrvcLvlHistoryTimestamp of the last metric result of the
sequence used in to compute the aggregated metric."
::= { etsysSrvcLvlAggrMeasureEntry 7 }
etsysSrvcLvlAggrMeasureDurationUnit OBJECT-TYPE
SYNTAX TimeUnit
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the unit of the measure duration."
DEFVAL { second }
::= { etsysSrvcLvlAggrMeasureEntry 8 }
etsysSrvcLvlAggrMeasureDuration OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the duration of the measure."
::= { etsysSrvcLvlAggrMeasureEntry 9 }
etsysSrvcLvlAggrMeasureHistorySize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum number of results saved for each metric of
this measure. Overflow condition will be managed by the object
etsysSrvcLvlAggrMeasureResultsMgmt. "
::= { etsysSrvcLvlAggrMeasureEntry 10 }
etsysSrvcLvlAggrMeasureStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines whether this row and the corresponding
entry in the etsysSrvcLvlNetMeasureTable is kept in volatile
storage and lost upon reboot or if this row is backed up
by non-volatile or permanent storage.
Possible values are: other(1), volatile(2), nonVolatile(3),
permanent(4), readOnly(5)."
DEFVAL { volatile }
::= { etsysSrvcLvlAggrMeasureEntry 11 }
etsysSrvcLvlAggrMeasureResultsMgmt OBJECT-TYPE
SYNTAX INTEGER {
wrap(1),
suspend(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the way the history of the aggregated
measure is managed.
'wrap'
continue the measure and erase the older entries in the
history.
'suspend'
stop the measure and keep the results in the history.
"
::= { etsysSrvcLvlAggrMeasureEntry 12 }
etsysSrvcLvlAggrMeasureHistoryOwner OBJECT-TYPE
SYNTAX EtsysSrvcLvlOwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The owner of the measure to summarize. "
::= { etsysSrvcLvlAggrMeasureEntry 13 }
etsysSrvcLvlAggrMeasureHistoryOwnerIndex OBJECT-TYPE
SYNTAX Integer32 (1.. 65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index (in owner's namespace) of the measure to summarize. "
::= { etsysSrvcLvlAggrMeasureEntry 14 }
etsysSrvcLvlAggrMeasureHistoryMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric of the measure to summarize. "
::= { etsysSrvcLvlAggrMeasureEntry 15 }
etsysSrvcLvlAggrMeasureAdminState OBJECT-TYPE
SYNTAX INTEGER {
start(0),
stop(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the activity of the aggregated measure.
'start'
The aggregated measure is started.
'stop'
The aggregated measure is stopped.
"
::= { etsysSrvcLvlAggrMeasureEntry 16 }
etsysSrvcLvlAggrMeasureMap OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows for classification of the measure. It is
typically the name of an administrative map.
"
DEFVAL { "" }
::= { etsysSrvcLvlAggrMeasureEntry 17 }
etsysSrvcLvlAggrMeasureStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry. Once the entry status is set to
active, the associate entry cannot be modified.
The creation of an aggregated measure forced the creation of the
corresponding entry in etsysSrvcLvlNetMeasureTable."
::= { etsysSrvcLvlAggrMeasureEntry 18 }
-- -------------------------------------------------------------
-- Conformance Information
-- -------------------------------------------------------------
etsysSrvcLvlReportingConformance OBJECT IDENTIFIER
::= { etsysServiceLevelReportingMIB 2 }
etsysSrvcLvlReportingGroups OBJECT IDENTIFIER
::= { etsysSrvcLvlReportingConformance 1 }
etsysSrvcLvlReportingCompliances OBJECT IDENTIFIER
::= { etsysSrvcLvlReportingConformance 2 }
-- -------------------------------------------------------------
-- Units of Conformance
-- -------------------------------------------------------------
etsysSrvcLvlSystemGroup OBJECT-GROUP
OBJECTS {
etsysSrvcLvlSystemTime,
etsysSrvcLvlSystemClockResolution,
etsysSrvcLvlMetricCapabilities,
etsysSrvcLvlMetricType,
etsysSrvcLvlMetricUnit,
etsysSrvcLvlMetricDescription
}
STATUS current
DESCRIPTION
"The System Group."
::= { etsysSrvcLvlReportingGroups 1 }
etsysSrvcLvlOwnersGroup OBJECT-GROUP
OBJECTS {
etsysSrvcLvlOwnersOwner,
etsysSrvcLvlOwnersGrantedMetrics,
etsysSrvcLvlOwnersQuota,
etsysSrvcLvlOwnersIpAddressType,
etsysSrvcLvlOwnersIpAddress,
etsysSrvcLvlOwnersEmail,
etsysSrvcLvlOwnersSMS,
etsysSrvcLvlOwnersStatus
}
STATUS current
DESCRIPTION
"The Owners Group."
::= { etsysSrvcLvlReportingGroups 2 }
etsysSrvcLvlHistoryGroup OBJECT-GROUP
OBJECTS {
etsysSrvcLvlHistorySequence,
etsysSrvcLvlHistoryTimestamp,
etsysSrvcLvlHistoryValue
}
STATUS current
DESCRIPTION
"The History Group."
::= { etsysSrvcLvlReportingGroups 3 }
etsysSrvcLvlMeasureGroup OBJECT-GROUP
OBJECTS {
etsysSrvcLvlNetMeasureName,
etsysSrvcLvlNetMeasureMetrics,
etsysSrvcLvlNetMeasureBeginTime,
etsysSrvcLvlNetMeasureDurationUnit,
etsysSrvcLvlNetMeasureDuration,
etsysSrvcLvlNetMeasureHistorySize,
etsysSrvcLvlNetMeasureFailureMgmtMode,
etsysSrvcLvlNetMeasureResultsMgmt,
etsysSrvcLvlNetMeasureSrcTypeP,
etsysSrvcLvlNetMeasureSrc,
etsysSrvcLvlNetMeasureDstTypeP,
etsysSrvcLvlNetMeasureDst,
etsysSrvcLvlNetMeasureTxMode,
etsysSrvcLvlNetMeasureTxPacketRateUnit,
etsysSrvcLvlNetMeasureTxPacketRate,
etsysSrvcLvlNetMeasureDevtnOrBurstSize,
etsysSrvcLvlNetMeasureMedOrIntBurstSize,
etsysSrvcLvlNetMeasureLossTimeout,
etsysSrvcLvlNetMeasureL3PacketSize,
etsysSrvcLvlNetMeasureDataPattern,
etsysSrvcLvlNetMeasureMap,
etsysSrvcLvlNetMeasureSingletons,
etsysSrvcLvlNetMeasureOperState,
etsysSrvcLvlAggrMeasureName,
etsysSrvcLvlAggrMeasureMetrics,
etsysSrvcLvlAggrMeasureBeginTime,
etsysSrvcLvlAggrMeasureAggrPeriodUnit,
etsysSrvcLvlAggrMeasureAggrPeriod,
etsysSrvcLvlAggrMeasureDurationUnit,
etsysSrvcLvlAggrMeasureDuration,
etsysSrvcLvlAggrMeasureHistorySize,
etsysSrvcLvlAggrMeasureStorageType,
etsysSrvcLvlAggrMeasureResultsMgmt,
etsysSrvcLvlAggrMeasureHistoryOwner,
etsysSrvcLvlAggrMeasureHistoryOwnerIndex,
etsysSrvcLvlAggrMeasureHistoryMetric,
etsysSrvcLvlAggrMeasureAdminState,
etsysSrvcLvlAggrMeasureMap,
etsysSrvcLvlAggrMeasureStatus
}
STATUS current
DESCRIPTION
"The Network and Aggregate Measures Group."
::= { etsysSrvcLvlReportingGroups 4 }
-- -------------------------------------------------------------
-- Compliance statements
-- -------------------------------------------------------------
etsysSrvcLvlReportingCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that support the
etsysSrvcLvlReportingMib."
MODULE -- this module
MANDATORY-GROUPS { etsysSrvcLvlSystemGroup,
etsysSrvcLvlOwnersGroup,
etsysSrvcLvlHistoryGroup,
etsysSrvcLvlMeasureGroup }
::= { etsysSrvcLvlReportingCompliances 1 }
END
Reference in New Issue View Git Blame Copy Permalink