librenms-librenms/doc/Support/Example-Hardware-Setup.md

source: Support/Example-Hardware-Setup.md

Example hardware setups

The information in this document is direct from users, it's a place for people to share their setups so you have an idea of what may be required for your install.

To obtain the device, port and sensor counts you can run:

select count(*) from devices;
select count(*) from ports where `deleted` = 0;
select count(*) from sensors where `sensor_deleted` = 0;

laf

Home

Running in Proxmox.

	LibreNMS	MySQL
Type	Virtual	Virtual
OS	CentOS 7	CentOS 7
CPU	2 Sockets, 4 Cores	1 Socket, 2 Cores
Memory	2GB	2GB
Disk Type	Raid 1, SSD	Raid 1, SSD
Disk Space	18GB	30GB
Devices	20	-
Ports	133	-
Health sensors	47	-
Load	< 0.1	< 0.1

Vente-Privée

NOC

	LibreNMS	MariaDB
Type	Dell R430	Dell R430
OS	Debian 7 (dotdeb)	Debian 7 (dotdeb)
CPU	2 Sockets, 14 Cores	1 Socket, 2 Cores
Memory	256GB	256GB
Disk Type	Raid 10, SSD	Raid 10, SSD
Disk Space	1TB	1TB
Devices	1028	-
Ports	26745	-
Health sensors	6238	-
Load	< 0.5	< 0.5