source: Alerting/Entities.md
Entities
Entities as described earlier are based on the table and column names within the database, if you are unsure of what the entity is you want then have a browse around inside MySQL using show tables
and desc <tablename>
.
Devices
Entity |
Description |
devices.hostname |
The device hostname |
devices.sysName |
The device sysName |
devices.sysDescr |
The device sysDescr |
devices.hardware |
The device hardware |
devices.version |
The device os version |
devices.location |
The device location |
devices.status |
The status of the device, 1 |
devices.status_reason |
The reason the device was detected as down (icmp or snmp) |
devices.ignore |
If the device is ignored this will be set to 1 |
devices.disabled |
If the device is disabled this will be set to 1 |
devices.last_polled |
The the last polled datetime (yyyy-mm-dd hh:mm:ss) |
devices.type |
The device type such as network, server, firewall, etc. |
BGP Peers
Entity |
Description |
bgpPeers.astext |
This is the description of the BGP Peer |
bgpPeers.bgpPeerIdentifier |
The IP address of the BGP Peer |
bgpPeers.bgpPeerRemoteAs |
The AS number of the BGP Peer |
bgpPeers.bgpPeerState |
The operational state of the BGP session |
bgpPeers.bgpPeerAdminStatus |
The administrative state of the BGP session |
bgpPeers.bgpLocalAddr |
The local address of the BGP session. |
IPSec Tunnels
Entity |
Description |
ipsec_tunnels.peer_addr |
The remote VPN peer address |
ipsec_tunnels.local_addr |
The local VPN address |
ipsec_tunnels.tunnel_status |
The VPN tunnels operational status. |
Memory pools
Entity |
Description |
mempools.mempool_type |
The memory pool type such as hrstorage, cmp and cemp |
mempools.mempool_descr |
The description of the pool such as Physical memory, Virtual memory and System memory |
mempools.mempool_perc |
The used percentage of the memory pool. |
Ports
Entity |
Description |
ports.ifDescr |
The interface description |
ports.ifName |
The interface name |
ports.ifSpeed |
The port speed in bps |
ports.ifHighSpeed |
The port speed in mbps |
ports.ifOperStatus |
The operational status of the port (up or down) |
ports.ifAdminStatus |
The administrative status of the port (up or down) |
ports.ifDuplex |
Duplex setting of the port |
ports.ifMtu |
The MTU setting of the port. |
Processors
Entity |
Description |
processors.processor_usage |
The usage of the processor as a percentage |
processors.processor_descr |
The description of the processor. |
Storage
Entity |
Description |
storage.storage_descr |
The description of the storage |
storage.storage_perc |
The usage of the storage as a percentage. |
Health / Sensors
Entity |
Description |
sensors.sensor_desc |
The sensors description. |
sensors.sensor_current |
The current sensors value. |
sensors.sensor_prev |
The previous sensor value. |
sensors.lastupdate |
The sensors last updated datetime stamp. |