mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
7445a736a6
git-svn-id: http://www.observium.org/svn/observer/trunk@1576 61d68cd4-352d-0410-923a-c4978735b2b8
588 lines
16 KiB
Plaintext
588 lines
16 KiB
Plaintext
-- SECTION 1: Top Level Definitions
|
|
|
|
|
|
|
|
|
|
CENTILLION-ROOT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
|
|
-- Centillion Root MIB Release 2.1.7
|
|
-- Revision 8/01/00
|
|
|
|
-- Copyright 1994-00 Nortel Networks, Inc.
|
|
-- All rights reserved.
|
|
-- This Bay Networks SNMP Management Information Base Specification
|
|
-- (Specification) embodies Bay Networks' confidential and
|
|
-- proprietary intellectual property. Bay Networks retains all
|
|
-- title and ownership in the Specification, including any
|
|
-- revisions.
|
|
|
|
-- This Specification is supplied "AS IS," and Bay Networks makes
|
|
-- no warranty, either express or implied, as to the use,
|
|
-- operation, condition, or performance of the Specification.
|
|
|
|
|
|
-- Imports
|
|
|
|
IMPORTS
|
|
enterprises FROM RFC1155-SMI
|
|
DisplayString FROM RFC1213-MIB
|
|
Counter32 FROM SNMPv2-SMI-v1
|
|
OBJECT-TYPE FROM RFC-1212;
|
|
|
|
|
|
-- Textual Conventions
|
|
|
|
--
|
|
-- All MIBs within this domain use the following textual convention
|
|
-- to describe the status of an entry in a row.
|
|
--
|
|
|
|
StatusIndicator ::=
|
|
INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
|
|
-- This type is used to specify a concentrator backplane.
|
|
|
|
SsBackplaneType ::=
|
|
INTEGER {
|
|
other(1), -- none of the following
|
|
atmBus(2) -- ATM Bus
|
|
}
|
|
|
|
-- This type is used to specify the switch chassis.
|
|
|
|
SsChassisType ::=
|
|
INTEGER {
|
|
other(1), -- none of the following
|
|
six-slot(2), -- 6 slot Chassis
|
|
twelve-slot(3), -- 12 slot Chassis
|
|
workgroup(4), -- Workgroup chassis (single slot)
|
|
three-slotC50N(5), -- 3 slot C50N Chassis
|
|
three-slotC50T(6), -- 3 slot C50T Chassis
|
|
six-slotBH5005(7) -- 6 slot BH5005 Chassis
|
|
}
|
|
|
|
-- This type is used to specify a mother card module.
|
|
-- NOTE: this module type is OBSELETE and should not be
|
|
-- supported in any new development. USE the
|
|
-- s5000 registration MIB instead.
|
|
SsModuleType ::=
|
|
INTEGER {
|
|
empty(1), -- nothing installed
|
|
other(2), -- none of the following
|
|
mTR4PC(3), -- Token-Ring Module (4 port)
|
|
mTRMCP4PC(4), -- MCP with Token-Ring (4 port) Card
|
|
mATM(5), -- ATM 2-port Multi Mode Fiber
|
|
mTRFiber(6), -- Token-Ring Fiber Module
|
|
mTRMCPFiber(7), -- MCP Token-Ring Fiber
|
|
mEther16PC10BT(8), -- Ethernet Module (16 port) 10 BaseT
|
|
mEtherMCP8PC10BT(9), -- MCP Ethernet 8 port 10 BaseT
|
|
mATM2PSMFiber(10), -- ATM 2-port Single Mode Fiber
|
|
mATM2PCopper(11), -- ATM 2-port Copper
|
|
mATM4PMMFiber(12), -- ATM 4-port Multi Mode Fiber
|
|
mATM4PSMFiber(13), -- ATM 4-port Single Mode Fiber
|
|
mATM4PCopper(14), -- ATM 4-port Copper
|
|
mATMMCP2PSMFiber(15), -- ATM MCP 2-port Single Mode Fiber
|
|
mATMMCP2PMMFiber(16), -- ATM MCP 2-port Multi Mode Fiber
|
|
mATMMCP2PCopper(17), -- ATM MCP 2-port Copper
|
|
mATMMCP4PSMFiber(18), -- ATM MCP 4-port Single Mode Fiber
|
|
mATMMCP4PMMFiber(19), -- ATM MCP 4-port Multi Mode Fiber
|
|
mATMMCP4PCopper(20), -- ATM MCP 4-port Copper
|
|
mATM2PC(21), -- ATM 2-port card
|
|
mATM4PC(22), -- ATM 4-port card
|
|
mATMMCP2PC(23), -- ATM MCP 2-port card
|
|
mATMMCP4PC(24), -- ATM MCP 4-port card
|
|
mEther16P10BT100BTCopper(25), -- Ethernet 16 port (14 10MB, 2 10/100MB)
|
|
mEther14P10BT100BF(26), -- Ethernet 14 port (12 10MB, 2 100MB)
|
|
mEther8P10BF(27), -- Ethernet 8 port 10BF
|
|
mEther10P10BT100BT(28), -- Ethernet 10 port (8 10MB, 2 10/100MB)
|
|
mEther16P10BT100BTMixed(29), -- Ethernet 10 port (8 10MB, 2 10/100MB)
|
|
mEther10P10BT100BTMIX(30), -- Ethernet 10 port (8 10MB, 2 10/100MB)
|
|
mEther12PBFL(32), -- 5324 12 Port BFL Enet Switch Module
|
|
mEther16P4x4(33), -- 5455 Ethernet 4x4 bank switching
|
|
mTRMCP8PC(34), -- 8 port Copper Token-Ring MCP
|
|
mTR8PC(35), -- 8 port UTP TokenSpeed Card
|
|
mEther24PC(36), -- 5328HD 24 port slave 10Mb
|
|
mEther24P10BT100BT(37), -- 5625 Enet 24 port 10/100Mb
|
|
mEther24P100BFx(38), -- 5424 Enet 24 port 100BaseFx
|
|
mTR8PFiber(39), -- 5524 8 port TR Fiber
|
|
mATM4PMDA(40), -- 5720 4 port ATM MDA
|
|
mATMMCP4PMDA(41), -- 5720M 4 port ATM MDA MCP
|
|
mEther4P100BT(42), -- 5425 4 port Ethernet 100Mb
|
|
mTR24PC(43), -- Token-Ring Module 24 port
|
|
mTR16PC(44), -- Token-Ring Module 16 port
|
|
mATMMCP1PSMFiber(45), -- ATM MCP 1-port Single Mode Fiber
|
|
mATMMCP1PMMFiber(46), -- ATM MCP 1-port Multi Mode Fiber
|
|
mATM1PMMFiber(47), -- ATM 1-port Multi Mode Fiber
|
|
mATM1PVNR(48), -- BH 5782 VNR 5000BH i int. OC3 port
|
|
mEther24P10BT100BTx(49), -- 5625H Enet 24 port 10/100Mb
|
|
mEther24P100BFX(50) -- 5424H Enet 24 port 100BaseFx
|
|
}
|
|
|
|
SsMediaType ::=
|
|
INTEGER {
|
|
mediaUnkown(1), -- none of the following
|
|
mediaTokenRing(2),
|
|
mediaFDDI(3),
|
|
mediaEthernet(4),
|
|
mediaATM(5)
|
|
}
|
|
|
|
|
|
-- All representations of MAC addresses in this MIB Module
|
|
-- use, as a textual convention (i.e. this convention does
|
|
-- not affect their encoding), the data type:
|
|
|
|
MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address in
|
|
-- the "canonical" order
|
|
-- defined by IEEE 802.1a, i.e., as if it were transmitted
|
|
-- least significant bit first, even though 802.5 (in
|
|
-- contrast to other 802.x protocols) requires MAC addresses
|
|
-- to be transmitted most significant bit first.
|
|
--
|
|
-- 16-bit addresses, if needed, are represented by setting
|
|
-- their upper 4 octets to all 0's, i.e., AAFF would be
|
|
-- represented as 00000000AAFF.
|
|
|
|
-- Represents a boolean value.
|
|
|
|
Boolean ::= INTEGER { true(1), false(2) }
|
|
|
|
-- Represents a single bit field.
|
|
|
|
BitField ::= INTEGER { clear(1), set(2) }
|
|
|
|
-- Port Identifier
|
|
|
|
PortId ::= INTEGER (1..65535)
|
|
|
|
-- Card Identifier
|
|
|
|
CardId ::= INTEGER (1..16)
|
|
|
|
-- System failure status indication type
|
|
|
|
FailIndicator ::= INTEGER { on(1), off(2) }
|
|
|
|
|
|
EnableIndicator ::= INTEGER { disabled(1), enabled(2) }
|
|
|
|
|
|
-- Top Branches under "centillion"
|
|
|
|
centillion OBJECT IDENTIFIER ::= { enterprises 930 }
|
|
|
|
cnProducts OBJECT IDENTIFIER ::= { centillion 1 }
|
|
proprietary OBJECT IDENTIFIER ::= { centillion 2 }
|
|
extensions OBJECT IDENTIFIER ::= { centillion 3 }
|
|
cnTemporary OBJECT IDENTIFIER ::= { centillion 4 }
|
|
|
|
|
|
|
|
-- Branches under "proprietary"
|
|
|
|
cnSystem OBJECT IDENTIFIER ::= { proprietary 1 }
|
|
cnATM OBJECT IDENTIFIER ::= { proprietary 2 }
|
|
|
|
sysChassis OBJECT IDENTIFIER ::= { cnSystem 1 }
|
|
sysConfig OBJECT IDENTIFIER ::= { cnSystem 2 }
|
|
sysMonitor OBJECT IDENTIFIER ::= { cnSystem 3 }
|
|
sysTrap OBJECT IDENTIFIER ::= { cnSystem 4 }
|
|
sysEvtLogMgmt OBJECT IDENTIFIER ::= { cnSystem 5 }
|
|
|
|
atmConfig OBJECT IDENTIFIER ::= { cnATM 1 }
|
|
atmMonitor OBJECT IDENTIFIER ::= { cnATM 2 }
|
|
--
|
|
-- LAN Emulation Extentions
|
|
--
|
|
atmLane OBJECT IDENTIFIER ::= { cnATM 3 }
|
|
|
|
-- Centillion SONET/SDH MIB
|
|
--
|
|
atmSonet OBJECT IDENTIFIER ::= { cnATM 4 }
|
|
|
|
--
|
|
-- Centillion unique traps
|
|
--
|
|
sysMcpRedundTrap OBJECT IDENTIFIER ::= {sysTrap 1}
|
|
cnPvcTraps OBJECT IDENTIFIER ::= {sysTrap 2}
|
|
|
|
|
|
|
|
-- Branches under "cnProducts"
|
|
|
|
-- These object identifiers are for use as values for sysObjectId.
|
|
|
|
cnCentillion100 OBJECT IDENTIFIER ::= { cnProducts 1 }
|
|
cnIBM8251 OBJECT IDENTIFIER ::= { cnProducts 2 }
|
|
cnBayStack301 OBJECT IDENTIFIER ::= { cnProducts 3 }
|
|
cn5000BH-MCP OBJECT IDENTIFIER ::= { cnProducts 4 }
|
|
cnCentillion50N OBJECT IDENTIFIER ::= { cnProducts 5 }
|
|
cnCentillion50T OBJECT IDENTIFIER ::= { cnProducts 6 }
|
|
cn5005BH-MCP OBJECT IDENTIFIER ::= { cnProducts 7 }
|
|
|
|
|
|
|
|
|
|
-- SECTION 2: System Group
|
|
--
|
|
-- This section contains system level information.
|
|
-- System Chassis information
|
|
--
|
|
-- Implementation of this group is mandatory for all Centillion agents.
|
|
|
|
chassisType OBJECT-TYPE
|
|
SYNTAX SsChassisType
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The chassis type."
|
|
::= { sysChassis 1 }
|
|
|
|
chassisBkplType OBJECT-TYPE
|
|
SYNTAX SsBackplaneType
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The chassis backplane type."
|
|
::= { sysChassis 2 }
|
|
|
|
chassisPs1FailStatus OBJECT-TYPE
|
|
SYNTAX FailIndicator
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Power supply 1 failure indicator. A value of on (1)
|
|
indicates a failure on power supply 1."
|
|
::= { sysChassis 3 }
|
|
|
|
chassisPs2FailStatus OBJECT-TYPE
|
|
SYNTAX FailIndicator
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Power supply 2 failure indicator. A value of on (1)
|
|
indicates a failure on power supply 2."
|
|
::= { sysChassis 4 }
|
|
|
|
chassisFanFailStatus OBJECT-TYPE
|
|
SYNTAX FailIndicator
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"System chassis fan failure indicator. A value of on (1)
|
|
indicates a failure on one or both of the system fans."
|
|
::= { sysChassis 5 }
|
|
|
|
chassisSerialNumber OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (3))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Chassis serial number."
|
|
::= { sysChassis 6 }
|
|
|
|
chassisPartNumber OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Chassis part number."
|
|
::= { sysChassis 7 }
|
|
|
|
|
|
-- Chassis Slot Configuration Table
|
|
|
|
-- This table contains information about the modules currently inserted in
|
|
-- the chassis. The information and configuration contained here is common
|
|
-- for all modules.
|
|
|
|
slotConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SlotConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The chassis slot configuration table."
|
|
::= { sysChassis 9 }
|
|
|
|
slotConfigEntry OBJECT-TYPE
|
|
SYNTAX SlotConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"What type of module is in each slot of the chassis."
|
|
INDEX { slotNumber }
|
|
::= { slotConfigTable 1 }
|
|
|
|
|
|
SlotConfigEntry ::= SEQUENCE {
|
|
slotNumber
|
|
INTEGER,
|
|
slotModuleType
|
|
SsModuleType,
|
|
slotModuleSerialNumber
|
|
OCTET STRING,
|
|
slotModuleHwVer
|
|
OCTET STRING,
|
|
slotModuleSwVer
|
|
DisplayString,
|
|
slotModuleStatus
|
|
INTEGER,
|
|
slotModuleLeds
|
|
OCTET STRING,
|
|
slotModuleReset
|
|
INTEGER,
|
|
slotConfigDelete
|
|
Boolean,
|
|
slotConfigMediaType
|
|
SsMediaType,
|
|
slotModuleMaxRAM
|
|
INTEGER,
|
|
slotModuleInstalledRAM
|
|
INTEGER,
|
|
slotModuleFlashSize
|
|
INTEGER,
|
|
slotModuleProductImageId
|
|
INTEGER,
|
|
slotModuleBaseMacAddress
|
|
MacAddress,
|
|
slotLastResetEPC
|
|
Counter32,
|
|
slotLastResetCause
|
|
Counter32,
|
|
slotLastResetVirtualAddress
|
|
Counter32,
|
|
slotLastResetTimeStamp
|
|
Counter32,
|
|
slotConfigAdd
|
|
Boolean,
|
|
slotConfigExtClockSource
|
|
INTEGER,
|
|
slotConfigTrafficShapingRate
|
|
INTEGER
|
|
}
|
|
|
|
slotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The chassis slot number. Valid entries are system dependent
|
|
based on the chassis type."
|
|
::= { slotConfigEntry 1 }
|
|
|
|
slotModuleType OBJECT-TYPE
|
|
SYNTAX SsModuleType
|
|
ACCESS read-only
|
|
STATUS deprecated -- 08/07/98
|
|
DESCRIPTION
|
|
"Module type."
|
|
::= { slotConfigEntry 2 }
|
|
|
|
slotModuleHwVer OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The hardware revision of the module."
|
|
::= { slotConfigEntry 3 }
|
|
|
|
slotModuleSerialNumber OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (3))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Module serial number. Format is 3 BCD digits."
|
|
::= { slotConfigEntry 4 }
|
|
|
|
slotModuleSwVer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The software revision of the module."
|
|
::= { slotConfigEntry 5 }
|
|
|
|
slotModuleStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ok(1), -- good status
|
|
fail(2) -- bad status
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This indicates the operational status of the module."
|
|
::= { slotConfigEntry 6 }
|
|
|
|
slotModuleLeds OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Status of the module LEDs. Each LED bank is encoded
|
|
in four bits (nibble), one bit for each LED. The least
|
|
significant bit of each nibble represents the bottom LED
|
|
of each bank. The first octet in the string, as read from
|
|
left to right represents the first LED banks."
|
|
::= { slotConfigEntry 7 }
|
|
|
|
slotModuleReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noReset(1), -- not resetting
|
|
reset(2) -- resetting
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This indicates the reset state of the module. Writing with
|
|
the value reset (2) will reset the module."
|
|
::= { slotConfigEntry 8 }
|
|
|
|
slotConfigDelete OBJECT-TYPE
|
|
SYNTAX Boolean
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this object causes the configuration of the
|
|
slot to be deleted. When read, this object has a value
|
|
of false(2)."
|
|
::= { slotConfigEntry 9 }
|
|
|
|
slotConfigMediaType OBJECT-TYPE
|
|
SYNTAX SsMediaType
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The configured card media type. In the case of a card
|
|
mismatch, the configured media type and the module type
|
|
will not match."
|
|
::= { slotConfigEntry 10 }
|
|
|
|
|
|
slotModuleMaxRAM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This indicates maximum RAM size in KB can be installed in
|
|
this module."
|
|
::= { slotConfigEntry 11 }
|
|
|
|
slotModuleInstalledRAM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This indicates installed RAM in KB of this module."
|
|
::= { slotConfigEntry 12 }
|
|
|
|
slotModuleFlashSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This indicates installed flash size in KB of this module."
|
|
::= { slotConfigEntry 13 }
|
|
|
|
|
|
slotModuleProductImageId OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notApplicable(1),
|
|
noAtmLanEmulation(2),
|
|
minAtmLanEmulation(3),
|
|
fullAtmLanEmulation(4),
|
|
pnnifullAtmLanEmulation(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This indicates the product target image id of this module."
|
|
::= { slotConfigEntry 14 }
|
|
|
|
|
|
slotModuleBaseMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object returns the module base Mac address. A physical
|
|
port's default Mac address can be computed based on this address
|
|
by using following computation:
|
|
|
|
Port(n)MacAddress = Moudle base Mac address + Port(n); where (n)
|
|
is the 0-based port number."
|
|
|
|
::= { slotConfigEntry 15 }
|
|
|
|
slotLastResetEPC OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The programe counter realated to the last reset."
|
|
::= { slotConfigEntry 16 }
|
|
|
|
slotLastResetVirtualAddress OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The bus address."
|
|
::= { slotConfigEntry 17 }
|
|
|
|
slotLastResetCause OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Register value related to the last reset"
|
|
::= { slotConfigEntry 18 }
|
|
|
|
slotLastResetTimeStamp OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A integer value of the system clock since last reset."
|
|
::= { slotConfigEntry 19 }
|
|
|
|
slotConfigAdd OBJECT-TYPE
|
|
SYNTAX Boolean
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this object causes the configuration of the
|
|
slot to be updated to match the module currently in
|
|
the slot. When read, this object always returns
|
|
false(2)."
|
|
|
|
::= { slotConfigEntry 20 }
|
|
|
|
slotConfigExtClockSource OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This field indicates the external clock source.
|
|
0 = Local Oscillator, 1..N = ATM port id for
|
|
external clock source. This object only applies
|
|
to ATM MDA modules with SM, MM, or UTP media types."
|
|
DEFVAL { 0 }
|
|
::= { slotConfigEntry 21 }
|
|
|
|
slotConfigTrafficShapingRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Configured traffic shaping rate in kilo bits per second
|
|
on an ATM module. The actual rate may be different
|
|
from the configured rate depending upon the physical
|
|
interface of ports in the module."
|
|
::= { slotConfigEntry 22 }
|
|
|
|
END
|