librenms-librenms/doc/Extensions/NFSen.md

source: Extensions/NFSen.md path: blob/master/doc/

NFSen

The installation of NFSen is out of scope for this document / LibreNMS

Configuration

The following is the configuration that can be used:

$config['nfsen_enable']      = 1;
$config['nfsen_split_char']  = '_';
$config['nfsen_rrds'][]      = '/var/nfsen/profiles-stat/live/';
$config['nfsen_rrds'][]      = '/var/nfsen/profiles-stat';
$config['nfsen_base'][]      = '/var/nfsen/';
$config['nfsen_suffix']      = "_yourdomain_com";

Set $config['nfsen_enable'] = 1; to enable NFSen support.

$config['nfsen_rrds'] This value tells us where your NFSen rrd files live. This can also be an array to specify more directories like:

$config['nfsen_rrds'][] = '/var/nfsen/profiles-stat/sitea/';
$config['nfsen_rrds'][] = '/var/nfsen/profiles-stat/siteb/';

Although for most setups, it will look like below, with the profiles-stat/live directory being where it stores the general RRDs for data sources.

$config['nfsen_rrds'][] = '/var/nfsen/profiles-stat/live';

If you wish to render info for configure channels for a device, you need add the various profile-stat directories your system uses, which for most systems will be as below.

$config['nfsen_rrds'][] = '/var/nfsen/profiles-stat';

When adding sources to nfsen.conf, it is important to use the hostname that matches what is configured in LibreNMS, because the rrd files NfSen creates is named after the source name (ident), and it doesn't allow you to use an IP address instead. However, in LibreNMS, if your device is added by an IP address, add your source with any name of your choice, and create a symbolic link to the rrd file.

cd /var/nfsen/profiles-stat/sitea/
ln -s mychannel.rrd librenmsdeviceIP.rrd

$config['nfsen_split_char']   = '_';

This value tells us what to replace the full stops . in the devices hostname with.

$config['nfsen_suffix']   = "_yourdomain_com";

The above is a very important bit as device names in NfSen are limited to 21 characters. This means full domain names for devices can be very problematic to squeeze in, so therefor this chunk is usually removed.

On a similar note, NfSen profiles for channels should be created with the same name.

Stats Defaults and Settings

Below are the default settings used with nfdump for stats.

For more defaulted information on that, please see nfdump(1).
The default location for nfdump is /usr/bin/nfdump. If nfdump is located elsewhere, set it with $config['nfdump'] = '/usr/local/bin/nfdump'; for example.

$config['nfsen_last_max'] = 153600;
$config['nfsen_top_max'] = 500;
$config['nfsen_top_N']=array( 10, 20, 50, 100, 200, 500 );
$config['nfsen_top_default']=20;
$config['nfsen_stat_default']='srcip';
$config['nfsen_order_default']='packets';
$config['nfsen_last_default']=900;
$config['nfsen_lasts']=array(
                            '300'=>'5 minutes',
                            '600'=>'10 minutes',
                            '900'=>'15 minutes',
                            '1800'=>'30 minutes',
                            '3600'=>'1 hour',
                            '9600'=>'3 hours',
                            '38400'=>'12 hours',
                            '76800'=>'24 hours',
                            '115200'=>'36 hours',
                            '153600'=>'48 hours',
                            );

$config['nfsen_last_max'] = 153600;

The above is the max value in seconds one may pull stats for. The higher this is, the more CPU and disk intensive the search will be.

Numbers larger than this will be set to this.

$config['nfsen_top_max'] = 500;

The above is max number of items to be displayed.

Numbers larger than this will be set to this.

$config['nfsen_top_N']=array( 10, 20, 50, 100, 200, 500 );

The above is a array containing a list for the drop down menu how many top items should be returned.

$config['nfsen_top_default']=20;

The above sets default top number to use from the drop down.

$config['nfsen_stat_default']='srcip';

The above sets default stat type to use from the drop down.

record   Flow Records
ip       Any IP Address
srcip    SRC IP Address
dstip    DST IP Address
port     Any Port
srcport  SRC Port
dstport  DST Port
srctos   SRC TOS
dsttos   DST TOS
tos      TOS
as       AS
srcas    SRC AS
dstas    DST AS

$config['nfsen_order_default']='packets';

The above sets default order type to use from the drop down. Any of the following below are currently supported.

flows    Number of total flows for the time period.
packet   Number of total packets for the time period.
bytes    Number of total bytes for the time period.
pps      Packets Per Second
bps      Bytes Per Second
bpp      Bytes Per Packet

$config['nfsen_last_default']=900;

The above is the last default to use from the drop down.

$config['nfsen_lasts']=array(
                            '300'=>'5 minutes',
                            '600'=>'10 minutes',
                            '900'=>'15 minutes',
                            '1800'=>'30 minutes',
                            '3600'=>'1 hour',
                            '9600'=>'3 hours',
                            '38400'=>'12 hours',
                            '76800'=>'24 hours',
                            '115200'=>'36 hours',
                            '153600'=>'48 hours',
                            );

The above associative array contains time intervals for how far back to go. The keys are the length in seconds and the value is just a description to display.