mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
53a4e91e8c
git-svn-id: http://www.observium.org/svn/observer/trunk@1645 61d68cd4-352d-0410-923a-c4978735b2b8
630 lines
21 KiB
Plaintext
630 lines
21 KiB
Plaintext
-- *****************************************************************
|
|
-- POWER-ETHERNET-MIB
|
|
--
|
|
-- This mib was extracted from RFC 3621
|
|
--
|
|
-- Copyright (c) 2006, 2009 by Cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
POWER-ETHERNET-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, mib-2, OBJECT-TYPE, Integer32,
|
|
Gauge32, Counter32, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB;
|
|
|
|
powerEthernetMIB MODULE-IDENTITY
|
|
|
|
LAST-UPDATED "200311240000Z" -- November 24, 2003
|
|
ORGANIZATION "IETF Ethernet Interfaces and Hub MIB
|
|
Working Group"
|
|
|
|
CONTACT-INFO
|
|
"
|
|
WG Charter:
|
|
http://www.ietf.org/html.charters/hubmib-charter.html
|
|
|
|
Mailing lists:
|
|
General Discussion: hubmib@ietf.org
|
|
To Subscribe: hubmib-requests@ietf.org
|
|
In Body: subscribe your_email_address
|
|
|
|
Chair: Dan Romascanu
|
|
Avaya
|
|
Tel: +972-3-645-8414
|
|
Email: dromasca@avaya.com
|
|
|
|
Editor: Avi Berger
|
|
PowerDsine Inc.
|
|
Tel: 972-9-7755100 Ext 307
|
|
Fax: 972-9-7755120
|
|
E-mail: avib@PowerDsine.com
|
|
"
|
|
|
|
DESCRIPTION
|
|
"The MIB module for managing Power Source Equipment
|
|
(PSE) working according to the IEEE 802.af Powered
|
|
Ethernet (DTE Power via MDI) standard.
|
|
|
|
The following terms are used throughout this
|
|
MIB module. For complete formal definitions,
|
|
the IEEE 802.3 standards should be consulted
|
|
wherever possible:
|
|
|
|
Group - A recommended, but optional, entity
|
|
defined by the IEEE 802.3 management standard,
|
|
in order to support a modular numbering scheme.
|
|
The classical example allows an implementor to
|
|
represent field-replaceable units as groups of
|
|
ports, with the port numbering matching the
|
|
modular hardware implementation.
|
|
|
|
Port - This entity identifies the port within the group
|
|
for which this entry contains information. The numbering
|
|
scheme for ports is implementation specific.
|
|
|
|
Copyright (c) The Internet Society (2003). This version
|
|
of this MIB module is part of RFC 3621; See the RFC
|
|
itself for full legal notices."
|
|
|
|
REVISION "200311240000Z" -- November 24, 2003
|
|
DESCRIPTION "Initial version, published as RFC 3621."
|
|
::= { mib-2 105 }
|
|
|
|
pethNotifications OBJECT IDENTIFIER ::= { powerEthernetMIB 0 }
|
|
pethObjects OBJECT IDENTIFIER ::= { powerEthernetMIB 1 }
|
|
pethConformance OBJECT IDENTIFIER ::= { powerEthernetMIB 2 }
|
|
|
|
-- PSE Objects
|
|
|
|
pethPsePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PethPsePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of objects that display and control the power
|
|
characteristics of power Ethernet ports on a Power Source
|
|
Entity (PSE) device. This group will be implemented in
|
|
managed power Ethernet switches and mid-span devices.
|
|
Values of all read-write objects in this table are
|
|
persistent at restart/reboot."
|
|
::= { pethObjects 1 }
|
|
|
|
pethPsePortEntry OBJECT-TYPE
|
|
SYNTAX PethPsePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that display and control the power
|
|
characteristics of a power Ethernet PSE port."
|
|
INDEX { pethPsePortGroupIndex , pethPsePortIndex }
|
|
::= { pethPsePortTable 1 }
|
|
|
|
PethPsePortEntry ::= SEQUENCE {
|
|
pethPsePortGroupIndex
|
|
Integer32,
|
|
pethPsePortIndex
|
|
Integer32,
|
|
pethPsePortAdminEnable
|
|
TruthValue,
|
|
pethPsePortPowerPairsControlAbility
|
|
TruthValue,
|
|
pethPsePortPowerPairs
|
|
INTEGER,
|
|
pethPsePortDetectionStatus
|
|
INTEGER,
|
|
pethPsePortPowerPriority
|
|
INTEGER,
|
|
pethPsePortMPSAbsentCounter
|
|
Counter32,
|
|
pethPsePortType
|
|
SnmpAdminString,
|
|
pethPsePortPowerClassifications
|
|
INTEGER,
|
|
pethPsePortInvalidSignatureCounter
|
|
Counter32,
|
|
pethPsePortPowerDeniedCounter
|
|
Counter32,
|
|
pethPsePortOverLoadCounter
|
|
Counter32,
|
|
pethPsePortShortCounter
|
|
Counter32
|
|
}
|
|
|
|
pethPsePortGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable uniquely identifies the group
|
|
containing the port to which a power Ethernet PSE is
|
|
connected. Group means box in the stack, module in a
|
|
rack and the value 1 MUST be used for non-modular devices.
|
|
Furthermore, the same value MUST be used in this variable,
|
|
pethMainPseGroupIndex, and pethNotificationControlGroupIndex
|
|
to refer to a given box in a stack or module in the rack."
|
|
::= { pethPsePortEntry 1 }
|
|
|
|
pethPsePortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable uniquely identifies the power Ethernet PSE
|
|
port within group pethPsePortGroupIndex to which the
|
|
power Ethernet PSE entry is connected."
|
|
::= { pethPsePortEntry 2 }
|
|
|
|
pethPsePortAdminEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"true (1) An interface which can provide the PSE functions.
|
|
false(2) The interface will act as it would if it had no PSE
|
|
function."
|
|
REFERENCE
|
|
"IEEE Std 802.3af Section 30.9.1.1.2 aPSEAdminState"
|
|
::= { pethPsePortEntry 3 }
|
|
|
|
pethPsePortPowerPairsControlAbility OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the capability of controlling the power pairs
|
|
functionality to switch pins for sourcing power.
|
|
The value true indicate that the device has the capability
|
|
to control the power pairs. When false the PSE Pinout
|
|
Alternative used cannot be controlled through the
|
|
PethPsePortAdminEnable attribute."
|
|
REFERENCE
|
|
"IEEE Std 802.3af Section 30.9.1.1.3
|
|
aPSEPowerPairsControlAbility"
|
|
::= { pethPsePortEntry 4 }
|
|
|
|
pethPsePortPowerPairs OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
signal(1),
|
|
spare(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes or controls the pairs in use. If the value of
|
|
pethPsePortPowerPairsControl is true, this object is
|
|
writable.
|
|
A value of signal(1) means that the signal pairs
|
|
only are in use.
|
|
A value of spare(2) means that the spare pairs
|
|
only are in use."
|
|
REFERENCE
|
|
"IEEE Std 802.3af Section 30.9.1.1.4 aPSEPowerPairs"
|
|
::= { pethPsePortEntry 5 }
|
|
|
|
pethPsePortDetectionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
searching(2),
|
|
deliveringPower(3),
|
|
fault(4),
|
|
test(5),
|
|
otherFault(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the operational status of the port PD detection.
|
|
A value of disabled(1)- indicates that the PSE State diagram
|
|
is in the state DISABLED.
|
|
A value of deliveringPower(3) - indicates that the PSE State
|
|
diagram is in the state POWER_ON for a duration greater than
|
|
tlim max (see IEEE Std 802.3af Table 33-5 tlim).
|
|
A value of fault(4) - indicates that the PSE State diagram is
|
|
in the state TEST_ERROR.
|
|
A value of test(5) - indicates that the PSE State diagram is
|
|
in the state TEST_MODE.
|
|
A value of otherFault(6) - indicates that the PSE State
|
|
diagram is in the state IDLE due to the variable
|
|
error_conditions.
|
|
A value of searching(2)- indicates the PSE State diagram is
|
|
in a state other than those listed above."
|
|
REFERENCE
|
|
"IEEE Std 802.3af Section 30.9.1.1.5
|
|
aPSEPowerDetectionStatus"
|
|
::= { pethPsePortEntry 6 }
|
|
|
|
pethPsePortPowerPriority OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
critical(1),
|
|
high(2),
|
|
low(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the priority of the port from the point
|
|
of view of a power management algorithm. The priority that
|
|
is set by this variable could be used by a control mechanism
|
|
that prevents over current situations by disconnecting first
|
|
ports with lower power priority. Ports that connect devices
|
|
critical to the operation of the network - like the E911
|
|
telephones ports - should be set to higher priority."
|
|
::= { pethPsePortEntry 7 }
|
|
|
|
pethPsePortMPSAbsentCounter OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter is incremented when the PSE state diagram
|
|
transitions directly from the state POWER_ON to the
|
|
state IDLE due to tmpdo_timer_done being asserted."
|
|
REFERENCE
|
|
"IEEE Std 802.3af Section 30.9.1.1.11
|
|
aPSEMPSAbsentCounter"
|
|
::= { pethPsePortEntry 8 }
|
|
|
|
pethPsePortType OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A manager will set the value of this variable to indicate
|
|
the type of powered device that is connected to the port.
|
|
The default value supplied by the agent if no value has
|
|
ever been set should be a zero-length octet string."
|
|
::= { pethPsePortEntry 9 }
|
|
|
|
pethPsePortPowerClassifications OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
class0(1),
|
|
class1(2),
|
|
class2(3),
|
|
class3(4),
|
|
class4(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Classification is a way to tag different terminals on the
|
|
Power over LAN network according to their power consumption.
|
|
Devices such as IP telephones, WLAN access points and others,
|
|
will be classified according to their power requirements.
|
|
|
|
The meaning of the classification labels is defined in the
|
|
IEEE specification.
|
|
|
|
This variable is valid only while a PD is being powered,
|
|
that is, while the attribute pethPsePortDetectionStatus
|
|
is reporting the enumeration deliveringPower."
|
|
REFERENCE
|
|
"IEEE Std 802.3af Section 30.9.1.1.6
|
|
aPSEPowerClassification"
|
|
::= { pethPsePortEntry 10 }
|
|
|
|
pethPsePortInvalidSignatureCounter OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter is incremented when the PSE state diagram
|
|
enters the state SIGNATURE_INVALID."
|
|
REFERENCE
|
|
"IEEE Std 802.3af Section 30.9.1.1.7
|
|
aPSEInvalidSignatureCounter"
|
|
::= { pethPsePortEntry 11 }
|
|
|
|
pethPsePortPowerDeniedCounter OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter is incremented when the PSE state diagram
|
|
enters the state POWER_DENIED."
|
|
REFERENCE
|
|
"IEEE Std 802.3af Section 30.9.1.1.8
|
|
aPSEPowerDeniedCounter"
|
|
::= { pethPsePortEntry 12 }
|
|
|
|
pethPsePortOverLoadCounter OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter is incremented when the PSE state diagram
|
|
enters the state ERROR_DELAY_OVER."
|
|
REFERENCE
|
|
"IEEE Std 802.3af Section 30.9.1.1.9
|
|
aPSEOverLoadCounter"
|
|
::= { pethPsePortEntry 13 }
|
|
|
|
pethPsePortShortCounter OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter is incremented when the PSE state diagram
|
|
enters the state ERROR_DELAY_SHORT."
|
|
REFERENCE
|
|
"IEEE Std 802.3af Section 30.9.1.1.10
|
|
aPSEShortCounter"
|
|
::= { pethPsePortEntry 14 }
|
|
|
|
-- Main PSE Objects
|
|
|
|
pethMainPseObjects OBJECT IDENTIFIER ::= { pethObjects 3 }
|
|
|
|
pethMainPseTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PethMainPseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of objects that display and control attributes
|
|
of the main power source in a PSE device. Ethernet
|
|
switches are one example of boxes that would support
|
|
these objects.
|
|
Values of all read-write objects in this table are
|
|
persistent at restart/reboot."
|
|
::= { pethMainPseObjects 1 }
|
|
|
|
pethMainPseEntry OBJECT-TYPE
|
|
SYNTAX PethMainPseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that display and control the Main
|
|
power of a PSE. "
|
|
INDEX { pethMainPseGroupIndex }
|
|
::= { pethMainPseTable 1 }
|
|
|
|
PethMainPseEntry ::= SEQUENCE {
|
|
pethMainPseGroupIndex
|
|
Integer32,
|
|
pethMainPsePower
|
|
Gauge32 ,
|
|
pethMainPseOperStatus
|
|
INTEGER,
|
|
pethMainPseConsumptionPower
|
|
Gauge32,
|
|
pethMainPseUsageThreshold
|
|
Integer32
|
|
}
|
|
pethMainPseGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable uniquely identifies the group to which
|
|
power Ethernet PSE is connected. Group means (box in
|
|
the stack, module in a rack) and the value 1 MUST be
|
|
used for non-modular devices. Furthermore, the same
|
|
value MUST be used in this variable, pethPsePortGroupIndex,
|
|
and pethNotificationControlGroupIndex to refer to a
|
|
given box in a stack or module in a rack."
|
|
::= { pethMainPseEntry 1 }
|
|
|
|
pethMainPsePower OBJECT-TYPE
|
|
SYNTAX Gauge32 (1..65535)
|
|
UNITS "Watts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The nominal power of the PSE expressed in Watts."
|
|
::= { pethMainPseEntry 2 }
|
|
|
|
pethMainPseOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
on(1),
|
|
off(2),
|
|
faulty(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of the main PSE."
|
|
::= { pethMainPseEntry 3 }
|
|
|
|
pethMainPseConsumptionPower OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "Watts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured usage power expressed in Watts."
|
|
::= { pethMainPseEntry 4 }
|
|
|
|
pethMainPseUsageThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (1..99)
|
|
UNITS "%"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The usage threshold expressed in percents for
|
|
comparing the measured power and initiating
|
|
an alarm if the threshold is exceeded."
|
|
::= { pethMainPseEntry 5 }
|
|
|
|
-- Notification Control Objects
|
|
|
|
pethNotificationControl OBJECT IDENTIFIER ::= { pethObjects 4 }
|
|
|
|
pethNotificationControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PethNotificationControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of objects that display and control the
|
|
Notification on a PSE device.
|
|
Values of all read-write objects in this table are
|
|
persistent at restart/reboot."
|
|
::= { pethNotificationControl 1 }
|
|
|
|
pethNotificationControlEntry OBJECT-TYPE
|
|
SYNTAX PethNotificationControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that control the Notification events."
|
|
INDEX { pethNotificationControlGroupIndex }
|
|
::= { pethNotificationControlTable 1 }
|
|
|
|
PethNotificationControlEntry ::= SEQUENCE {
|
|
pethNotificationControlGroupIndex
|
|
Integer32,
|
|
pethNotificationControlEnable
|
|
TruthValue
|
|
}
|
|
pethNotificationControlGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable uniquely identifies the group. Group
|
|
means box in the stack, module in a rack and the value
|
|
1 MUST be used for non-modular devices. Furthermore,
|
|
the same value MUST be used in this variable,
|
|
pethPsePortGroupIndex, and
|
|
pethMainPseGroupIndex to refer to a given box in a
|
|
stack or module in a rack. "
|
|
::= { pethNotificationControlEntry 1 }
|
|
|
|
pethNotificationControlEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls, on a per-group basis, whether
|
|
or not notifications from the agent are enabled. The
|
|
value true(1) means that notifications are enabled; the
|
|
value false(2) means that they are not."
|
|
::= { pethNotificationControlEntry 2 }
|
|
|
|
--
|
|
-- Notifications Section
|
|
--
|
|
--
|
|
|
|
pethPsePortOnOffNotification NOTIFICATION-TYPE
|
|
OBJECTS { pethPsePortDetectionStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This Notification indicates if Pse Port is delivering or
|
|
not power to the PD. This Notification SHOULD be sent on
|
|
every status change except in the searching mode.
|
|
At least 500 msec must elapse between notifications
|
|
being emitted by the same object instance."
|
|
::= { pethNotifications 1 }
|
|
|
|
pethMainPowerUsageOnNotification NOTIFICATION-TYPE
|
|
OBJECTS { pethMainPseConsumptionPower }
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This Notification indicate PSE Threshold usage
|
|
indication is on, the usage power is above the
|
|
threshold. At least 500 msec must elapse between
|
|
notifications being emitted by the same object
|
|
instance."
|
|
::= { pethNotifications 2 }
|
|
|
|
pethMainPowerUsageOffNotification NOTIFICATION-TYPE
|
|
OBJECTS { pethMainPseConsumptionPower }
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This Notification indicates PSE Threshold usage indication
|
|
off, the usage power is below the threshold.
|
|
At least 500 msec must elapse between notifications being
|
|
emitted by the same object instance."
|
|
::= { pethNotifications 3 }
|
|
|
|
--
|
|
-- Conformance Section
|
|
--
|
|
pethCompliances OBJECT IDENTIFIER ::= { pethConformance 1 }
|
|
pethGroups OBJECT IDENTIFIER ::= { pethConformance 2 }
|
|
|
|
pethCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the requirements for conformance to the
|
|
Power Ethernet MIB."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { pethPsePortGroup,
|
|
pethPsePortNotificationGroup,
|
|
pethNotificationControlGroup
|
|
}
|
|
GROUP pethMainPseGroup
|
|
DESCRIPTION
|
|
"The pethMainPseGroup is mandatory for PSE systems
|
|
that implement a main power supply."
|
|
GROUP pethMainPowerNotificationGroup
|
|
DESCRIPTION
|
|
"The pethMainPowerNotificationGroup is mandatory for
|
|
PSE systems that implement a main power supply."
|
|
::= { pethCompliances 1 }
|
|
|
|
pethPsePortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
pethPsePortAdminEnable,
|
|
pethPsePortPowerPairsControlAbility,
|
|
pethPsePortPowerPairs,
|
|
pethPsePortDetectionStatus,
|
|
pethPsePortPowerPriority,
|
|
pethPsePortMPSAbsentCounter,
|
|
pethPsePortInvalidSignatureCounter,
|
|
pethPsePortPowerDeniedCounter,
|
|
pethPsePortOverLoadCounter,
|
|
pethPsePortShortCounter,
|
|
pethPsePortType,
|
|
pethPsePortPowerClassifications
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PSE Port objects."
|
|
::= { pethGroups 1 }
|
|
|
|
pethMainPseGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
pethMainPsePower,
|
|
pethMainPseOperStatus,
|
|
pethMainPseConsumptionPower,
|
|
pethMainPseUsageThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Main PSE Objects. "
|
|
::= { pethGroups 2 }
|
|
|
|
pethNotificationControlGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
pethNotificationControlEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification Control Objects. "
|
|
::= { pethGroups 3 }
|
|
|
|
pethPsePortNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { pethPsePortOnOffNotification}
|
|
STATUS current
|
|
DESCRIPTION "Pse Port Notifications."
|
|
::= { pethGroups 4 }
|
|
|
|
pethMainPowerNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { pethMainPowerUsageOnNotification,
|
|
pethMainPowerUsageOffNotification}
|
|
STATUS current
|
|
DESCRIPTION "Main PSE Notifications."
|
|
::= { pethGroups 5 }
|
|
|
|
END
|
|
|