Routinator

Introducing ‘Routinator 3000,’ RPKI relying party software written in Rust. If you have any feedback, we would love to hear from you. Don’t hesitate to create an issue on Github or post a message on our RPKI mailing list.

Quick Start

Assuming you have rsync and the C toolchain but not yet Rust, here’s how you get the Routinator to run as an RTR server listening on 127.0.0.1 port 3323:

curl https://sh.rustup.rs -sSf | sh
source ~/.cargo/env
cargo install routinator
routinator rtrd -al 127.0.0.1:3323

If you have an older version of the Routinator, you can update via

cargo install -f routinator

Quick Start with Docker

Due to the impracticality of complying with the ARIN TAL distribution terms in an unsupervised Docker environment, prior to launching the container it is necessary to first review and agree to the ARIN TAL terms available at https://www.arin.net/resources/rpki/tal.html

The ARIN TAL RFC 7730 format file available at that URL will then need to be downloaded and mounted into the docker container as a replacement for the dummy arin.tal file that is shipped with Routinator.

# Create a local directory for the RPKI cache
sudo mkdir -p /etc/routinator/tals
# Fetch the ARIN TAL (after agreeing to the distribution terms as described above)
sudo wget https://www.arin.net/resources/rpki/arin-rfc7730.tal -P /etc/routinator/tals
# Launch a detached container named 'routinator' (will listen on 0.0.0.0:3323 and expose that port)
sudo docker run -d --name routinator -p 3323:3323 -v /etc/routinator/tals/arin-rfc7730.tal:/root/.rpki-cache/tals/arin.tal nlnetlabs/routinator

RPKI

The Resource Public Key Infrastructure provides cryptographically signed statements about the association of Internet routing resources. In particular, it allows the holder of an IP address prefix to publish which AS number will be the origin of BGP route announcements for it.

All of these statements are published in a distributed repository. Routinator will collect these statements into a local copy, validate their signatures, and construct a list of associations between IP address prefixes and AS numbers. It provides this information to routers supporting the RPKI-RTR protocol or can output it in a number of useful formats.

Full Roadmap

• Fetch certificates and ROAs via rsync
• Perform cryptographic validation
• Export validated ROAs in CSV, JSON and RPSL format
• Add local white list exceptions and overrides (RFC 8416)
• Implement the RPKI-RTR protocol for pushing RPKI data to supported routers (RFC 6810, RFC 8210)
• Exhaustive interoperability and compliance testing
• Integration with alerting and monitoring services so that route hijacks, misconfigurations, connectivity and application problems can be flagged.
• Implement the RRDP protocol for fetching (RFC 8182)
• Implement a basic web-based user interface and Command Line Interface
• Expose an API
• Add the ability to process Internet Routing Registry data

Getting Started

There’s two things you need for Routinator: rsync and Rust and a C toolc… There are three things you need for Routinator: rsync, Rust and a C toolchain. You need rsync because the RPKI repository currently uses rsync as its main means of distribution. You need Rust because that’s what the Routinator has been written in. Some of the cryptographic primitives used by the Routinator require a C toolchain, so you need that, too.

Since this currently is an early version, we decided not to distribute binary packages just yet. But don’t worry, getting Rust and building packages with it is easy.

rsync

Currently, Routinator requires the rsync executable to be in your path. We are not quite sure which particular version you need at the very least, but whatever is being shipped with current Linux and *BSD distributions and macOS should be fine.

On Windows, Routinator requires the rsync version that comes with Cygwin – make sure to select rsync during the installation phase. And yes, Routinator totally works on Windows, too.

If you don’t have rsync, please head to http://rsync.samba.org/

Rust

While some system distributions include Rust as system packages, Routinator relies on a relatively new version of Rust, currently 1.30 or newer. We therefore suggest to use the canonical Rust installation via a tool called rustup.

To install rustup and Rust, simply do:

curl https://sh.rustup.rs -sSf | sh

or, alternatively, get the file, have a look and then run it manually. Follow the instructions to get rustup and cargo, the rust build tool, into your path.

You can update your Rust installation later by simply running

rustup update

C Toolchain

Some of the libraries Routinator depends on require a C toolchain to be present. Your system probably has some easy way to install the minimum set of packages to build from C sources. If you are unsure, try to run cc on a command line and if there’s a complaint about missing input files, you are probably good to go.

Building and Running

The easiest way to get Routinator is to leave it to cargo by saying

cargo install routinator

If you want to try the master branch from the repository instead of a release version, you can run

cargo install --git https://github.com/NLnetLabs/routinator.git

If you want to update an installed version, you run the same command but add the -f flag (aka force) to approve overwriting the installed version.

The command will build Routinator and install it in the same directory that cargo itself lives in (likely $HOME/.cargo/bin). Which means Routinator will be in your path, too.

There are currently two major functions of the Routinator: printing the list of valid route origins, also known as Validated ROA Payload or VRP, and providing the service for routers to access this list via a protocol known as RPKI-to-Router protocol or RTR.

These (and all other functions) of Routinator are accessible on the command line via sub-commands. The commands are vrps and rtrd, respectively.

So, to have Routinator print the list, you say

routinator vrps

If this is the first time you’ve been using Routinator, it will create $HOME/.rpki-cache, put the trust anchor locators of the five RIRs there, and then complain that ARIN’s TAL is in fact not really there.

Follow the instructions provided and try again. You can also add additional trust anchors by simple dropping their TAL file in RFC 7730 format into $HOME/.rpki-cache/tals.

Now Routinator will rsync the entire RPKI repository to your machine (which will take a while during the first run), validate it and produce a long list of AS numbers and prefixes.

Information about additional command line arguments is available via the -h option or you can look at the more detailed man page via the man sub-command:

routinator man

It is also available online on the NLnetLabs documentation site.

Feeding a Router with RPKI-RTR

Routinator supports RPKI-RTR as specified in RFC 8210 as well as the older version from RFC 6810. It will act as an RTR server if you start it with the rtrd sub-command. It will do so as a daemon and detach from your terminal unless you provide the -a (for attached) option.

You can specify the address(es) to listen on via the -l (or --listen) option. If you don’t, it will listen on 127.0.0.1:3323 by default. This isn’t the IANA-assigned default port for the protocol, which would be 323. But since that is a privileged port you’d need to be running Routinator as root when otherwise there is no reason to do that. Also, note that the default address is a localhost address for security reasons.

So, in order to run Routinator as an RTR server listening on port 3323 on both 192.0.2.13 and 2001:0DB8::13 without detaching from the terminal, run

routinator rtrd -a -l 192.0.2.13:3323 -l [2001:0DB8::13]:3323

By default, the repository will be updated and re-validated every hour as per the recommendation in the RFC. You can change this via the --refresh option and specify the interval between re-validations in seconds. That is, if you rather have Routinator validate every fifteen minutes, the above command becomes

routinator rtrd -a -l 192.0.2.13:3323 -l [2001:0DB8::13]:3323 --refresh=900

Configuration Files

Routinator can take its configuration from a file, too. You can specify such a configuration file via the -c option. If you don’t, Routinator will check if there is a file $HOME/.routinator.conf and if it exists, use it. If it doesn’t exist and there is no -c option, default values are used.

The configuration file is a TOML file. Its entries are named similarly to the command line options. Details about the available entries and there meaning can be found in the manual page. In addition, a complete sample configuration file showing all the default values can be found in the repository at etc/routinator.conf.

Local Exceptions

If you would like to add exceptions to the validated RPKI data in the form of local filters and additions, you can specify this in a file using JSON notation according to the SLURM standard. You can find two example files in the repository at /test/slurm. Use the -x option to refer to your file with local exceptions.

Routinator will re-read that file on every validation run, so you can simply update the file whenever your exceptions change.