13 KiB
Reports
The BNG Blaster is able to generate detailed result reports at the end of of the test execution.
Standard Output Reports
____ __ ____ _ __ ,/
/ __ \ / /_ / __ ) _____ (_)_____ / /__ ,'/
/ /_/ // __// __ |/ ___// // ___// //_/ ,' /
/ _, _// /_ / /_/ // / / // /__ / ,< ,' /_____,
/_/ |_| \__//_____//_/ /_/ \___//_/|_| .'____ ,'
____ _ _ ______ ____ _ _ / ,'
/ __ ) / | / // ____/ / __ ) / /____ _ _____ / /_ ___ ____ / ,'
/ __ |/ |/ // / __ / __ |/ // __ `// ___// __// _ \ / ___/ /,'
/ /_/ // /| // /_/ / / /_/ // // /_/ /(__ )/ /_ / __// / /
/_____//_/ |_/ \____/ /_____//_/ \__,_//____/ \__/ \___//_/
Report:
Sessions PPPoE: 500 IPoE: 0
Sessions established: 500/500
DHCPv6 sessions established: 500
Setup Time: 396 ms
Setup Rate: 1262.63 CPS (MIN: 1262.63 AVG: 1262.63 MAX: 1262.63)
Flapped: 0
Network Interface ( eth2 ):
TX: 25503 packets
RX: 24254 packets
TX Session: 8500 packets
RX Session: 8248 packets (0 loss)
TX Session IPv6: 8500 packets
RX Session IPv6: 8000 packets (0 loss)
TX Session IPv6PD: 8500 packets
RX Session IPv6PD: 8000 packets (0 loss)
TX Multicast: 0 packets
RX Drop Unknown: 1 packets
TX Encode Error: 0
RX Decode Error: 0 packets
TX Send Failed: 0
TX No Buffer: 0
TX Poll Kernel: 0
RX Poll Kernel: 3932
Access Interface ( eth1 ):
TX: 33250 packets
RX: 34047 packets
TX Session: 8500 packets
RX Session: 8248 packets (0 loss, 0 wrong session)
TX Session IPv6: 8500 packets
RX Session IPv6: 8000 packets (0 loss, 0 wrong session)
TX Session IPv6PD: 8500 packets
RX Session IPv6PD: 8000 packets (0 loss, 0 wrong session)
RX Multicast: 0 packets (0 loss)
RX Drop Unknown: 1 packets
TX Encode Error: 33250 packets
RX Decode Error: 0 packets
TX Send Failed: 0
TX No Buffer: 0
TX Poll Kernel: 0
RX Poll Kernel: 3932
Access Interface Protocol Packet Stats:
ARP TX: 0 RX: 0
PADI TX: 500 RX: 0
PADO TX: 0 RX: 500
PADR TX: 500 RX: 0
PADS TX: 0 RX: 500
PADT TX: 1 RX: 499
LCP TX: 2249 RX: 2249
PAP TX: 250 RX: 250
CHAP TX: 250 RX: 500
IPCP TX: 1500 RX: 1500
IP6CP TX: 1500 RX: 1500
IGMP TX: 0 RX: 1298
ICMP TX: 0 RX: 0
ICMPv6 TX: 500 RX: 500
DHCPv6 TX: 500 RX: 500
Access Interface Protocol Timeout Stats:
LCP Echo Request: 0
LCP Request: 0
IPCP Request: 0
IP6CP Request: 0
PAP: 0
CHAP: 0
ICMPv6 RS: 0
DHCPv6 Request: 0
Session Traffic:
Config:
IPv4 PPS: 1
IPv6 PPS: 1
IPv6PD PPS: 1
Verified Traffic Flows: 3000/3000
Access IPv4: 500
Access IPv6: 500
Access IPv6PD: 500
Network IPv4: 500
Network IPv6: 500
Network IPv6PD: 500
First Sequence Number Received:
Access IPv4 MIN: 1 MAX: 2
Access IPv6 MIN: 2 MAX: 2
Access IPv6PD MIN: 2 MAX: 2
Network IPv4 MIN: 1 MAX: 2
Network IPv6 MIN: 2 MAX: 2
Network IPv6PD MIN: 2 MAX: 2
JSON Reports
A detailed JSON report is generated if enabled using the optional argument -J <filename>
as shown in the example below.
{
"report": {
"sessions": 500,
"sessions-pppoe": 500,
"sessions-ipoe": 0,
"sessions-established": 500,
"sessions-flapped": 0,
"setup-time-ms": 396,
"setup-rate-cps": 1263,
"setup-rate-cps-min": 1263,
"setup-rate-cps-avg": 1263,
"setup-rate-cps-max": 1263,
"dhcpv6-sessions-established": 500,
"network-interfaces": [
{
"name": "eth2",
"tx-packets": 25503,
"rx-packets": 24254,
"tx-session-packets": 8500,
"rx-session-packets": 8248,
"rx-session-packets-loss": 0,
"tx-session-packets-avg-pps-max": 500,
"rx-session-packets-avg-pps-max": 500,
"tx-session-packets-ipv6": 8500,
"rx-session-packets-ipv6": 8000,
"rx-session-packets-ipv6-loss": 0,
"tx-session-packets-avg-pps-max-ipv6": 500,
"rx-session-packets-avg-pps-max-ipv6": 500,
"tx-session-packets-ipv6pd": 8500,
"rx-session-packets-ipv6pd": 8000,
"rx-session-packets-ipv6pd-loss": 0,
"tx-session-packets-avg-pps-max-ipv6pd": 500,
"rx-session-packets-avg-pps-max-ipv6pd": 500,
"tx-multicast-packets": 0
}
],
"access-interfaces": [
{
"name": "eth1",
"tx-packets": 33250,
"rx-packets": 34047,
"tx-session-packets": 8500,
"rx-session-packets": 8248,
"rx-session-packets-loss": 0,
"rx-session-packets-wrong-session": 0,
"tx-session-packets-avg-pps-max": 500,
"rx-session-packets-avg-pps-max": 500,
"tx-session-packets-ipv6": 8500,
"rx-session-packets-ipv6": 8000,
"rx-session-packets-ipv6-loss": 0,
"rx-session-packets-ipv6-wrong-session": 0,
"tx-session-packets-avg-pps-max-ipv6": 500,
"rx-session-packets-avg-pps-max-ipv6": 500,
"tx-session-packets-ipv6pd": 8500,
"rx-session-packets-ipv6pd": 8000,
"rx-session-packets-ipv6pd-loss": 0,
"rx-session-packets-ipv6pd-wrong-session": 0,
"tx-session-packets-avg-pps-max-ipv6pd": 500,
"rx-session-packets-avg-pps-max-ipv6pd": 500,
"rx-multicast-packets": 0,
"rx-multicast-packets-loss": 0,
"protocol-stats": {
"arp-tx": 0,
"arp-rx": 0,
"padi-tx": 500,
"pado-rx": 500,
"padr-tx": 500,
"pads-rx": 500,
"padt-tx": 1,
"padt-rx": 499,
"lcp-tx": 2249,
"lcp-rx": 2249,
"pap-tx": 250,
"pap-rx": 250,
"chap-tx": 250,
"chap-rx": 500,
"ipcp-tx": 1500,
"ipcp-rx": 1500,
"ip6cp-tx": 1500,
"ip6cp-rx": 1500,
"igmp-tx": 0,
"igmp-rx": 1298,
"icmp-tx": 0,
"icmp-rx": 0,
"icmpv6-tx": 500,
"icmpv6-rx": 500,
"dhcpv6-tx": 500,
"dhcpv6-rx": 500,
"lcp-echo-timeout": 0,
"lcp-request-timeout": 0,
"ipcp-request-timeout": 0,
"ip6cp-request-timeout": 0,
"pap-timeout": 0,
"chap-timeout": 0,
"icmpv6-rs-timeout": 0,
"dhcpv6-timeout": 0
}
}
],
"session-traffic": {
"config-ipv4-pps": 1,
"config-ipv6-pps": 1,
"config-ipv6pd-pps": 1,
"total-flows": 3000,
"verified-flows": 3000,
"verified-flows-access-ipv4": 500,
"verified-flows-access-ipv6": 500,
"verified-flows-access-ipv6pd": 500,
"verified-flows-network-ipv4": 500,
"verified-flows-network-ipv6": 500,
"verified-flows-network-ipv6pd": 500,
"first-seq-rx-access-ipv4-min": 1,
"first-seq-rx-access-ipv4-max": 2,
"first-seq-rx-access-ipv6-min": 2,
"first-seq-rx-access-ipv6-max": 2,
"first-seq-rx-access-ipv6pd-min": 2,
"first-seq-rx-access-ipv6pd-max": 2,
"first-seq-rx-network-ipv4-min": 1,
"first-seq-rx-network-ipv4-max": 2,
"first-seq-rx-network-ipv6-min": 2,
"first-seq-rx-network-ipv6-max": 2,
"first-seq-rx-network-ipv6pd-min": 2,
"first-seq-rx-network-ipv6pd-max": 2
}
}
}
Interface Statistics
Session Traffic Statistics
Those statistics are related to the test traffic send between PPPoE sessions and the network interface.
Flow | Description |
---|---|
Access RX | Network traffic received on access interface (downstream) |
Access TX | Network traffic send from access interface (Upstream) |
Network RX | Access traffic received on network interface (Upstream) |
Network TX | Access traffic send from network interface (downstream) |
Verified Traffic Flows
Counts the verified traffic flows per type and direction.
The Access IPv4
tells how many sessions have successfully received
session verification traffic IPv4 traffic on the access interface. Similar
for IPv6 or IPv6PD (prefix delegation). Session verification traffic received
on the network interface is counted similar using the Network IP...
statistics.
Assuming session traffic is enabled for IPv4, IPv6 and IPv6PD, in this case all statics should be equal matching the number of sessions.
Example report output for 100 sessions:
Session Traffic:
Config:
IPv4 PPS: 1
IPv6 PPS: 1
IPv6PD PPS: 1
Verified Traffic Flows: 3000/3000
Access IPv4: 500
Access IPv6: 500
Access IPv6PD: 500
Network IPv4: 500
Network IPv6: 500
Network IPv6PD: 500
First Sequence Number Received:
Access IPv4 MIN: 1 MAX: 2
Access IPv6 MIN: 2 MAX: 2
Access IPv6PD MIN: 2 MAX: 2
Network IPv4 MIN: 1 MAX: 2
Network IPv6 MIN: 2 MAX: 2
Network IPv6PD MIN: 2 MAX: 2
JSON:
{
"session-traffic": {
"config-ipv4-pps": 1,
"config-ipv6-pps": 1,
"config-ipv6pd-pps": 1,
"total-flows": 3000,
"verified-flows": 3000,
"verified-flows-access-ipv4": 500,
"verified-flows-access-ipv6": 500,
"verified-flows-access-ipv6pd": 500,
"verified-flows-network-ipv4": 500,
"verified-flows-network-ipv6": 500,
"verified-flows-network-ipv6pd": 500,
"first-seq-rx-access-ipv4-min": 1,
"first-seq-rx-access-ipv4-max": 2,
"first-seq-rx-access-ipv6-min": 2,
"first-seq-rx-access-ipv6-max": 2,
"first-seq-rx-access-ipv6pd-min": 2,
"first-seq-rx-access-ipv6pd-max": 2,
"first-seq-rx-network-ipv4-min": 1,
"first-seq-rx-network-ipv4-max": 2,
"first-seq-rx-network-ipv6-min": 2,
"first-seq-rx-network-ipv6-max": 2,
"first-seq-rx-network-ipv6pd-min": 2,
"first-seq-rx-network-ipv6pd-max": 2
}
}
The flow verification status can be also queried via
global control socket command session-traffic
.
$ cat command.json | jq .
{
"command": "session-traffic"
}
$ cat command.json | sudo nc -U test.socket | jq .
{
"status": "ok",
"code": 200,
"session-traffic": {
"total-flows": 3000,
"verified-flows": 3000
}
}
First Sequence Number Received
If session traffic is enabled, the BNG Blaster will start sending bidirectional traffic between PPPoE session and network interface as soon as the session is established using the rate as configured starting with sequence number 1 for each flow.
Example config output with 1 packet per second:
{
"session-traffic": {
"ipv4-pps": 1,
"ipv6-pps": 1,
"ipv6pd-pps": 1
}
}
Assuming the first sequence number received for given flow is 5 combined with a rate of 1 PPS would mean that it took between 4 and 5 seconds until forwarding is working.
Example report output with 1 packet per second:
STDOUT:
First Sequence Number Received:
Access IPv4 MIN: 1 MAX: 1
Access IPv6 MIN: 1 MAX: 1
Access IPv6PD MIN: 1 MAX: 1
Network IPv4 MIN: 1 MAX: 1
Network IPv6 MIN: 1 MAX: 1
Network IPv6PD MIN: 1 MAX: 1
JSON:
{
"first-seq-rx-access-ipv4-min": 1,
"first-seq-rx-access-ipv4-max": 1,
"first-seq-rx-access-ipv6-min": 1,
"first-seq-rx-access-ipv6-max": 1,
"first-seq-rx-access-ipv6pd-min": 1,
"first-seq-rx-access-ipv6pd-max": 1,
"first-seq-rx-network-ipv4-min": 1,
"first-seq-rx-network-ipv4-max": 1,
"first-seq-rx-network-ipv6-min": 1,
"first-seq-rx-network-ipv6-max": 1,
"first-seq-rx-network-ipv6pd-min": 1,
"first-seq-rx-network-ipv6pd-max": 1
}