mirror of
https://github.com/xdp-project/BNG-router.git
synced 2024-05-06 15:54:53 +00:00
Update README
This commit is contained in:
@ -28,4 +28,77 @@ sudo echo 1 > /proc/sys/net/ipv4/ip_forward
|
||||
sudo echo 1 > /proc/sys/net/ipv4/conf/all/accept_local
|
||||
|
||||
Verify using tcpdump:
|
||||
sudo tcpdump -s 0 -i <netif> port 67 and port 68 -vvv
|
||||
sudo tcpdump -s 0 -i <netif> port 67 and port 68 -vvv
|
||||
|
||||
====== TEST SETUP ======
|
||||
|
||||
2 physical Linux servers connected back-to-back with a patch cable.
|
||||
|
||||
===== Client =====
|
||||
|
||||
Kernel: 5.4.0-72-generic
|
||||
NIC model: Mellanox Technologies MT27800 Family [ConnectX-5]
|
||||
NIC name: ens6f0
|
||||
|
||||
Preparation:
|
||||
|
||||
sudo ip link set ens6f0 up
|
||||
sudo ip link add link ens6f0 name ens6f0.83 type vlan id 83
|
||||
sudo ip link set ens6f0.83 up
|
||||
sudo ip link add link ens6f0.83 name ens6f0.83.20 type vlan id 20
|
||||
sudo ip link set ens6f0.83.20 up
|
||||
|
||||
Test:
|
||||
|
||||
sudo dhclient ens6f0.83.20
|
||||
|
||||
===== BNG =====
|
||||
|
||||
Kernel: 5.9.0-050900-lowlatency
|
||||
NIC model: Mellanox Technologies MT27800 Family [ConnectX-5]
|
||||
NIC name: ens6f0np0
|
||||
|
||||
Preparation:
|
||||
|
||||
sudo ip link set ens6f0np0 up
|
||||
sudo ip link add link ens6f0np0 name ens6f0np0.83 type vlan id 83
|
||||
sudo ip link set ens6f0np0.83 up
|
||||
sudo ip link add link ens6f0np0.83 name ens6f0np0.83.20 type vlan id 20
|
||||
sudo ip link set ens6f0np0.83.20 up
|
||||
|
||||
sudo ethtool -K ens6f0np0 rxvlan off
|
||||
|
||||
sudo echo 1 > /proc/sys/net/ipv4/conf/ens6f0np0.83.20/accept_local
|
||||
sudo echo 1 > /proc/sys/net/ipv4/ip_forward
|
||||
|
||||
Test:
|
||||
|
||||
# Launch XDP program
|
||||
sudo ./dhcp_user_xdp -i ens6f0np0 -d 192.168.4.20 -s 10.100.100.3
|
||||
|
||||
# tcpdump upstream interface to verify that packet is forwarded
|
||||
sudo tcpdump -n -i eno1 port 67
|
||||
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
|
||||
listening on eno1, link-type EN10MB (Ethernet), capture size 262144 bytes
|
||||
10:10:00.191071 IP 10.100.100.3.68 > 192.168.4.20.67: BOOTP/DHCP, Request from b8:59:9f:06:5a:98, length 300
|
||||
10:10:03.114784 IP 10.100.100.3.68 > 192.168.4.20.67: BOOTP/DHCP, Request from b8:59:9f:06:5a:98, length 300
|
||||
^C
|
||||
2 packets captured
|
||||
2 packets received by filter
|
||||
0 packets dropped by kernel
|
||||
|
||||
# Open trace pipe to see debug messages from XDP program
|
||||
sudo cat /sys/kernel/debug/tracing/trace_pipe
|
||||
|
||||
<idle>-0 [003] d.s2 11051597.318498: bpf_trace_printk: Ethertype 800
|
||||
<idle>-0 [003] d.s2 11051597.318499: bpf_trace_printk: Found VLAN tag 83 at depth 0
|
||||
<idle>-0 [003] d.s2 11051597.318500: bpf_trace_printk: Found VLAN tag 20 at depth 1
|
||||
<idle>-0 [003] d.s2 11051597.318501: bpf_trace_printk: Parsing DHCP packet, opcode 1, hops 0
|
||||
<idle>-0 [003] d.s2 11051597.318502: bpf_trace_printk: Broadcast packet received, opcode 1, hops 0
|
||||
<idle>-0 [003] d.s2 11051597.318503: bpf_trace_printk: Got option code 53 at offset 290, hex 122
|
||||
<idle>-0 [003] d.s2 11051597.318504: bpf_trace_printk: Got option code 12 at offset 293, hex 125
|
||||
<idle>-0 [003] d.s2 11051597.318506: bpf_trace_printk: Got option code 55 at offset 304, hex 130
|
||||
<idle>-0 [003] d.s2 11051597.318508: bpf_trace_printk: Got option code 255 at offset 319, hex 13f
|
||||
<idle>-0 [003] d.s2 11051597.318509: bpf_trace_printk: Going to write DHCP option at offset 319
|
||||
<idle>-0 [003] d.s2 11051597.318510: bpf_trace_printk: Wrote DHCP option at offset 290, returning XDP_PASS
|
||||
^C
|
||||
|
Reference in New Issue
Block a user