headers/linux: update if_link.h and if_xdp.h from kernel v5.11-rc7

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
This commit is contained in:
Jesper Dangaard Brouer
2021-02-12 18:01:02 +01:00
parent 27765e8449
commit 10abd546ca
2 changed files with 268 additions and 41 deletions

View File

@@ -1,30 +1,29 @@
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _UAPI_LINUX_IF_LINK_H
#define _UAPI_LINUX_IF_LINK_H
#ifndef _LINUX_IF_LINK_H
#define _LINUX_IF_LINK_H
#include <linux/types.h>
#include <linux/netlink.h>
/* This struct should be in sync with struct rtnl_link_stats64 */
struct rtnl_link_stats {
__u32 rx_packets; /* total packets received */
__u32 tx_packets; /* total packets transmitted */
__u32 rx_bytes; /* total bytes received */
__u32 tx_bytes; /* total bytes transmitted */
__u32 rx_errors; /* bad packets received */
__u32 tx_errors; /* packet transmit problems */
__u32 rx_dropped; /* no space in linux buffers */
__u32 tx_dropped; /* no space available in linux */
__u32 multicast; /* multicast packets received */
__u32 rx_packets;
__u32 tx_packets;
__u32 rx_bytes;
__u32 tx_bytes;
__u32 rx_errors;
__u32 tx_errors;
__u32 rx_dropped;
__u32 tx_dropped;
__u32 multicast;
__u32 collisions;
/* detailed rx_errors: */
__u32 rx_length_errors;
__u32 rx_over_errors; /* receiver ring buff overflow */
__u32 rx_crc_errors; /* recved pkt with crc error */
__u32 rx_frame_errors; /* recv'd frame alignment error */
__u32 rx_fifo_errors; /* recv'r fifo overrun */
__u32 rx_missed_errors; /* receiver missed packet */
__u32 rx_over_errors;
__u32 rx_crc_errors;
__u32 rx_frame_errors;
__u32 rx_fifo_errors;
__u32 rx_missed_errors;
/* detailed tx_errors */
__u32 tx_aborted_errors;
@@ -37,29 +36,201 @@ struct rtnl_link_stats {
__u32 rx_compressed;
__u32 tx_compressed;
__u32 rx_nohandler; /* dropped, no handler found */
__u32 rx_nohandler;
};
/* The main device statistics structure */
/**
* struct rtnl_link_stats64 - The main device statistics structure.
*
* @rx_packets: Number of good packets received by the interface.
* For hardware interfaces counts all good packets received from the device
* by the host, including packets which host had to drop at various stages
* of processing (even in the driver).
*
* @tx_packets: Number of packets successfully transmitted.
* For hardware interfaces counts packets which host was able to successfully
* hand over to the device, which does not necessarily mean that packets
* had been successfully transmitted out of the device, only that device
* acknowledged it copied them out of host memory.
*
* @rx_bytes: Number of good received bytes, corresponding to @rx_packets.
*
* For IEEE 802.3 devices should count the length of Ethernet Frames
* excluding the FCS.
*
* @tx_bytes: Number of good transmitted bytes, corresponding to @tx_packets.
*
* For IEEE 802.3 devices should count the length of Ethernet Frames
* excluding the FCS.
*
* @rx_errors: Total number of bad packets received on this network device.
* This counter must include events counted by @rx_length_errors,
* @rx_crc_errors, @rx_frame_errors and other errors not otherwise
* counted.
*
* @tx_errors: Total number of transmit problems.
* This counter must include events counter by @tx_aborted_errors,
* @tx_carrier_errors, @tx_fifo_errors, @tx_heartbeat_errors,
* @tx_window_errors and other errors not otherwise counted.
*
* @rx_dropped: Number of packets received but not processed,
* e.g. due to lack of resources or unsupported protocol.
* For hardware interfaces this counter may include packets discarded
* due to L2 address filtering but should not include packets dropped
* by the device due to buffer exhaustion which are counted separately in
* @rx_missed_errors (since procfs folds those two counters together).
*
* @tx_dropped: Number of packets dropped on their way to transmission,
* e.g. due to lack of resources.
*
* @multicast: Multicast packets received.
* For hardware interfaces this statistic is commonly calculated
* at the device level (unlike @rx_packets) and therefore may include
* packets which did not reach the host.
*
* For IEEE 802.3 devices this counter may be equivalent to:
*
* - 30.3.1.1.21 aMulticastFramesReceivedOK
*
* @collisions: Number of collisions during packet transmissions.
*
* @rx_length_errors: Number of packets dropped due to invalid length.
* Part of aggregate "frame" errors in `/proc/net/dev`.
*
* For IEEE 802.3 devices this counter should be equivalent to a sum
* of the following attributes:
*
* - 30.3.1.1.23 aInRangeLengthErrors
* - 30.3.1.1.24 aOutOfRangeLengthField
* - 30.3.1.1.25 aFrameTooLongErrors
*
* @rx_over_errors: Receiver FIFO overflow event counter.
*
* Historically the count of overflow events. Such events may be
* reported in the receive descriptors or via interrupts, and may
* not correspond one-to-one with dropped packets.
*
* The recommended interpretation for high speed interfaces is -
* number of packets dropped because they did not fit into buffers
* provided by the host, e.g. packets larger than MTU or next buffer
* in the ring was not available for a scatter transfer.
*
* Part of aggregate "frame" errors in `/proc/net/dev`.
*
* This statistics was historically used interchangeably with
* @rx_fifo_errors.
*
* This statistic corresponds to hardware events and is not commonly used
* on software devices.
*
* @rx_crc_errors: Number of packets received with a CRC error.
* Part of aggregate "frame" errors in `/proc/net/dev`.
*
* For IEEE 802.3 devices this counter must be equivalent to:
*
* - 30.3.1.1.6 aFrameCheckSequenceErrors
*
* @rx_frame_errors: Receiver frame alignment errors.
* Part of aggregate "frame" errors in `/proc/net/dev`.
*
* For IEEE 802.3 devices this counter should be equivalent to:
*
* - 30.3.1.1.7 aAlignmentErrors
*
* @rx_fifo_errors: Receiver FIFO error counter.
*
* Historically the count of overflow events. Those events may be
* reported in the receive descriptors or via interrupts, and may
* not correspond one-to-one with dropped packets.
*
* This statistics was used interchangeably with @rx_over_errors.
* Not recommended for use in drivers for high speed interfaces.
*
* This statistic is used on software devices, e.g. to count software
* packet queue overflow (can) or sequencing errors (GRE).
*
* @rx_missed_errors: Count of packets missed by the host.
* Folded into the "drop" counter in `/proc/net/dev`.
*
* Counts number of packets dropped by the device due to lack
* of buffer space. This usually indicates that the host interface
* is slower than the network interface, or host is not keeping up
* with the receive packet rate.
*
* This statistic corresponds to hardware events and is not used
* on software devices.
*
* @tx_aborted_errors:
* Part of aggregate "carrier" errors in `/proc/net/dev`.
* For IEEE 802.3 devices capable of half-duplex operation this counter
* must be equivalent to:
*
* - 30.3.1.1.11 aFramesAbortedDueToXSColls
*
* High speed interfaces may use this counter as a general device
* discard counter.
*
* @tx_carrier_errors: Number of frame transmission errors due to loss
* of carrier during transmission.
* Part of aggregate "carrier" errors in `/proc/net/dev`.
*
* For IEEE 802.3 devices this counter must be equivalent to:
*
* - 30.3.1.1.13 aCarrierSenseErrors
*
* @tx_fifo_errors: Number of frame transmission errors due to device
* FIFO underrun / underflow. This condition occurs when the device
* begins transmission of a frame but is unable to deliver the
* entire frame to the transmitter in time for transmission.
* Part of aggregate "carrier" errors in `/proc/net/dev`.
*
* @tx_heartbeat_errors: Number of Heartbeat / SQE Test errors for
* old half-duplex Ethernet.
* Part of aggregate "carrier" errors in `/proc/net/dev`.
*
* For IEEE 802.3 devices possibly equivalent to:
*
* - 30.3.2.1.4 aSQETestErrors
*
* @tx_window_errors: Number of frame transmission errors due
* to late collisions (for Ethernet - after the first 64B of transmission).
* Part of aggregate "carrier" errors in `/proc/net/dev`.
*
* For IEEE 802.3 devices this counter must be equivalent to:
*
* - 30.3.1.1.10 aLateCollisions
*
* @rx_compressed: Number of correctly received compressed packets.
* This counters is only meaningful for interfaces which support
* packet compression (e.g. CSLIP, PPP).
*
* @tx_compressed: Number of transmitted compressed packets.
* This counters is only meaningful for interfaces which support
* packet compression (e.g. CSLIP, PPP).
*
* @rx_nohandler: Number of packets received on the interface
* but dropped by the networking stack because the device is
* not designated to receive packets (e.g. backup link in a bond).
*/
struct rtnl_link_stats64 {
__u64 rx_packets; /* total packets received */
__u64 tx_packets; /* total packets transmitted */
__u64 rx_bytes; /* total bytes received */
__u64 tx_bytes; /* total bytes transmitted */
__u64 rx_errors; /* bad packets received */
__u64 tx_errors; /* packet transmit problems */
__u64 rx_dropped; /* no space in linux buffers */
__u64 tx_dropped; /* no space available in linux */
__u64 multicast; /* multicast packets received */
__u64 rx_packets;
__u64 tx_packets;
__u64 rx_bytes;
__u64 tx_bytes;
__u64 rx_errors;
__u64 tx_errors;
__u64 rx_dropped;
__u64 tx_dropped;
__u64 multicast;
__u64 collisions;
/* detailed rx_errors: */
__u64 rx_length_errors;
__u64 rx_over_errors; /* receiver ring buff overflow */
__u64 rx_crc_errors; /* recved pkt with crc error */
__u64 rx_frame_errors; /* recv'd frame alignment error */
__u64 rx_fifo_errors; /* recv'r fifo overrun */
__u64 rx_missed_errors; /* receiver missed packet */
__u64 rx_over_errors;
__u64 rx_crc_errors;
__u64 rx_frame_errors;
__u64 rx_fifo_errors;
__u64 rx_missed_errors;
/* detailed tx_errors */
__u64 tx_aborted_errors;
@@ -71,8 +242,7 @@ struct rtnl_link_stats64 {
/* for cslip etc */
__u64 rx_compressed;
__u64 tx_compressed;
__u64 rx_nohandler; /* dropped, no handler found */
__u64 rx_nohandler;
};
/* The struct should be in sync with struct ifmap */
@@ -167,17 +337,28 @@ enum {
IFLA_NEW_IFINDEX,
IFLA_MIN_MTU,
IFLA_MAX_MTU,
IFLA_PROP_LIST,
IFLA_ALT_IFNAME, /* Alternative ifname */
IFLA_PERM_ADDRESS,
IFLA_PROTO_DOWN_REASON,
__IFLA_MAX
};
#define IFLA_MAX (__IFLA_MAX - 1)
enum {
IFLA_PROTO_DOWN_REASON_UNSPEC,
IFLA_PROTO_DOWN_REASON_MASK, /* u32, mask for reason bits */
IFLA_PROTO_DOWN_REASON_VALUE, /* u32, reason bit value */
__IFLA_PROTO_DOWN_REASON_CNT,
IFLA_PROTO_DOWN_REASON_MAX = __IFLA_PROTO_DOWN_REASON_CNT - 1
};
/* backwards compatibility for userspace */
#ifndef __KERNEL__
#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
#endif
enum {
IFLA_INET_UNSPEC,
@@ -340,6 +521,8 @@ enum {
IFLA_BRPORT_NEIGH_SUPPRESS,
IFLA_BRPORT_ISOLATED,
IFLA_BRPORT_BACKUP_PORT,
IFLA_BRPORT_MRP_RING_OPEN,
IFLA_BRPORT_MRP_IN_OPEN,
__IFLA_BRPORT_MAX
};
#define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
@@ -404,6 +587,8 @@ enum {
IFLA_MACVLAN_MACADDR,
IFLA_MACVLAN_MACADDR_DATA,
IFLA_MACVLAN_MACADDR_COUNT,
IFLA_MACVLAN_BC_QUEUE_LEN,
IFLA_MACVLAN_BC_QUEUE_LEN_USED,
__IFLA_MACVLAN_MAX,
};
@@ -460,6 +645,7 @@ enum {
IFLA_MACSEC_REPLAY_PROTECT,
IFLA_MACSEC_VALIDATION,
IFLA_MACSEC_PAD,
IFLA_MACSEC_OFFLOAD,
__IFLA_MACSEC_MAX,
};
@@ -483,6 +669,14 @@ enum macsec_validation_type {
MACSEC_VALIDATE_MAX = __MACSEC_VALIDATE_END - 1,
};
enum macsec_offload {
MACSEC_OFFLOAD_OFF = 0,
MACSEC_OFFLOAD_PHY = 1,
MACSEC_OFFLOAD_MAC = 2,
__MACSEC_OFFLOAD_END,
MACSEC_OFFLOAD_MAX = __MACSEC_OFFLOAD_END - 1,
};
/* IPVLAN section */
enum {
IFLA_IPVLAN_UNSPEC,
@@ -580,6 +774,18 @@ enum ifla_geneve_df {
GENEVE_DF_MAX = __GENEVE_DF_END - 1,
};
/* Bareudp section */
enum {
IFLA_BAREUDP_UNSPEC,
IFLA_BAREUDP_PORT,
IFLA_BAREUDP_ETHERTYPE,
IFLA_BAREUDP_SRCPORT_MIN,
IFLA_BAREUDP_MULTIPROTO_MODE,
__IFLA_BAREUDP_MAX
};
#define IFLA_BAREUDP_MAX (__IFLA_BAREUDP_MAX - 1)
/* PPP section */
enum {
IFLA_PPP_UNSPEC,
@@ -636,6 +842,7 @@ enum {
IFLA_BOND_AD_USER_PORT_KEY,
IFLA_BOND_AD_ACTOR_SYSTEM,
IFLA_BOND_TLB_DYNAMIC_LB,
IFLA_BOND_PEER_NOTIF_DELAY,
__IFLA_BOND_MAX,
};
@@ -694,6 +901,7 @@ enum {
IFLA_VF_IB_NODE_GUID, /* VF Infiniband node GUID */
IFLA_VF_IB_PORT_GUID, /* VF Infiniband port GUID */
IFLA_VF_VLAN_LIST, /* nested list of vlans, option for QinQ */
IFLA_VF_BROADCAST, /* VF broadcast */
__IFLA_VF_MAX,
};
@@ -704,6 +912,10 @@ struct ifla_vf_mac {
__u8 mac[32]; /* MAX_ADDR_LEN */
};
struct ifla_vf_broadcast {
__u8 broadcast[32];
};
struct ifla_vf_vlan {
__u32 vf;
__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
@@ -875,7 +1087,14 @@ enum {
#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
/* HSR section */
/* HSR/PRP section, both uses same interface */
/* Different redundancy protocols for hsr device */
enum {
HSR_PROTOCOL_HSR,
HSR_PROTOCOL_PRP,
HSR_PROTOCOL_MAX,
};
enum {
IFLA_HSR_UNSPEC,
@@ -885,6 +1104,9 @@ enum {
IFLA_HSR_SUPERVISION_ADDR, /* Supervision frame multicast addr */
IFLA_HSR_SEQ_NR,
IFLA_HSR_VERSION, /* HSR version */
IFLA_HSR_PROTOCOL, /* Indicate different protocol than
* HSR. For example PRP.
*/
__IFLA_HSR_MAX,
};
@@ -944,11 +1166,12 @@ enum {
#define XDP_FLAGS_SKB_MODE (1U << 1)
#define XDP_FLAGS_DRV_MODE (1U << 2)
#define XDP_FLAGS_HW_MODE (1U << 3)
#define XDP_FLAGS_REPLACE (1U << 4)
#define XDP_FLAGS_MODES (XDP_FLAGS_SKB_MODE | \
XDP_FLAGS_DRV_MODE | \
XDP_FLAGS_HW_MODE)
#define XDP_FLAGS_MASK (XDP_FLAGS_UPDATE_IF_NOEXIST | \
XDP_FLAGS_MODES)
XDP_FLAGS_MODES | XDP_FLAGS_REPLACE)
/* These are stored into IFLA_XDP_ATTACHED on dump. */
enum {
@@ -968,6 +1191,7 @@ enum {
IFLA_XDP_DRV_PROG_ID,
IFLA_XDP_SKB_PROG_ID,
IFLA_XDP_HW_PROG_ID,
IFLA_XDP_EXPECTED_FD,
__IFLA_XDP_MAX,
};
@@ -1022,4 +1246,4 @@ struct ifla_rmnet_flags {
__u32 mask;
};
#endif /* _UAPI_LINUX_IF_LINK_H */
#endif /* _LINUX_IF_LINK_H */

View File

@@ -73,9 +73,12 @@ struct xdp_umem_reg {
};
struct xdp_statistics {
__u64 rx_dropped; /* Dropped for reasons other than invalid desc */
__u64 rx_dropped; /* Dropped for other reasons */
__u64 rx_invalid_descs; /* Dropped due to invalid descriptor */
__u64 tx_invalid_descs; /* Dropped due to invalid descriptor */
__u64 rx_ring_full; /* Dropped due to rx ring being full */
__u64 rx_fill_ring_empty_descs; /* Failed to retrieve item from fill ring */
__u64 tx_ring_empty_descs; /* Failed to retrieve item from tx ring */
};
struct xdp_options {