* Add support for Nokia 1830 PSS Optical gear
Tested against 1830 PSS-8 Chassis, in single and multi-chassis configurations
Supports Optical Power, temperature, current, power, and a variety of card states, alarms, and trail status.
Of note: With multi-chassis nodes, reading values from the non-master can be a "slow" process, slow in that the default timeout Libre ships with can cause the SNMP client to begin issuing retries. This can result in the chassis daemon rate limiting and/or blocking the client. The solution here is to raise the SNMP timeout within each device's configuration; unfortunately those values are not configurable on a per-OS basis (at least not at this time).
* Removing Unused / Duplicate MIBs
* Ports min polled period of 1
Prevent divide by 0
Use Mac utility
* fix bad snmprec for airos-af-ltu
* Update a large amount of invalid mac addresses
either the script is capturing them wrong or users are mangling them
* More updated test data
* Update test data with bad input
* Fix ones using encoded <private> and attempt to fix capture
* Update awplus data
* restore missing data
* update other DNOS
* Fix ones using encoded <private> and attempt to fix capture
* Fix ones using encoded <private> and attempt to fix capture
* fix typo
* Update some data
* update data
* update ruijie
* modifications needed for update of VALERE-DC-POWER-MIB with new file ELTEK-BC2000-DC-POWER-MIB
* add test results for BC2000 post update
* updated test file data
* re-upload of updated files
* reverted valere.json to defaults and recreated with proper varient .json
* replace vpwrShelfIndex with vpwrBayIndex
* updated test data
* Update test data
* try again valere_bc2000.json
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Ports module fix nulls not updating
* Fix broken test data
I'd like to see how it came out broken in the first place, but I don't have access
* Update json data
* Fix fortivoice snmprec
* Fix scs-ks
* Fix bad siteboss550 data
* Added support for Cambium cnMatrix switches
* Fixed styling issues
* Fixed styling issues
* Fixed duplicate, incorrectly labeled LLDP-EXT-DOT3-MIB and LLDP-EXT-DOT1-MIB
* Corrected MIB with the same name but with different OIDs configured: LLDP-EXT-MED/-CAMBIUM/-MIB
* Removed my added duplicate MIBs
* Removed unused MIBs
* Adding oid upsAdvOutputActivePower
Adding oid upsAdvOutputActivePower under the power section as this value is in watts.
* Create apc_smx750.json
Adding test JSON data for APC changes
* Create apc_smx750.snmprec
Adding snmpsim test data for APC changes
* Update apc_smx750.json
* Update apc_smx750.snmprec
* Update apc_smx750.json
* RouterOS: use mtxrGaugeTable instead of mtxrHealthGroup
Should now exactly match System > Health
Historical data will be lost
* fix yaml
* Fix numeric oid
* Update test data, add table to crs317
* Add groups and cleanup yaml
* revert state_name as it is used in the rrd file name
* Except the gauge table state sensor
* Group Health -> System
* update json
* update json
* Added support for Nutanix VM count, disk state, CPU usage and RAM usage
* Added num_oid values required for pull request
* Fixes for Nutanix AOS graphs
* Create F5-COMMON-SMI-MIB
* Create F5-PLATFORM-STATS-MIB
* Create f5os.yaml
* Create f5os.yaml
* Create f5os_f5os.snmprec
* Create f5os_f5os.json
* Remove remaining test line
* Add mandatory num_oid
* Add num_oid for fanspeed
* Force use of index for fanspeed
* Force index for temperature + add snmp_flags to make it work
* Update test data
* Update test data
* APC last input failure & display outlet name
* SNMP data & test files
* fix total energy divisor
* fix ap8853
* fix ap8959eu3
* test fixes
* Adjust sensor descr new format #{outletid} : {outletlabel}
* Add support for OpenManage Modular devices.
* Update dell-ome-m.yaml
Remove commented out dmmGlobalSystemStatus num_oid
Change Max/Min Power to Peak/Min Usage
* json test file for open manage modular support
* Update dell-ome-m_dell-ome-m.json
* Update dell-ome-m_dell-ome-m.snmprec
* Update dell-ome-m_dell-ome-m.json
* Update dell-ome-m_dell-ome-m.snmprec
* Update dell-ome-m_dell-ome-m.json
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Force cast on some values before doing arithmetic
Some devices (like Delta InsightPower G3 Mini SNMP Card) return STRING instead of numerical value.
A few lines after, when doing a division on it, everything go bad ( / $divisor).
I added force casting, no more crash and the values are OK.
* Using helper cast_number() instead of intval()
* Fix style
* Add test data
* Stop using deprecated function cast_number
* rework into a json app and support the old style
* working now
* add health checking
* add some datapoints to make writing alerts easy
* add a few missing item for has checks
* rework the app page
* use the right var for id9
* print the self test log if we have it
* add a graph for the max temp
* display the max temp graph
* display the health pass in the disk list if we have the data
* fix legacy handling and set app as ok
* replace id190 and id194 with the more useful maxtemp graph on the apps page
* don't print the additional info area for legacy extends
* add id232
* add id252 graph support
* properly display id232 now
* do not display SSD graphs for non-SSD disks
* for legacy extends, make sure we don't have a bad line
* add missing label for Product value
* fix metrics
* rework the metrics stuff a bit more
* typo fix
* more smart metrics cleanup
* add exit info to metrics
* style cleanup and logic checking for when disks are all now fine
* fix checking for no more health errors
* update the docs for SMART for v1 and remove slightly pointless notes about useSN
* update the docs
* initial test stuff
* add missing tests for the legacy code
* save if it it is legacy or not
* style cleanup
* update the smart legacy test
* style cleanup
* more test tweaking
* some more style cleanup
* more test fixes
* correct the disk ID for the legacy test da0 -> Z304VCFY
* more tests update
* more test cleanup
* begin cleanup of the v1 tests
* more v1 test updates
* more tests for v1
* more test cleanup
* fix exit_nonzero and add unhealthy metric
* add smart alerts
* add the metric unhealthy to the stat test
* use app data for the smart-common.inc.php
* Squash Commit
Fortigate Mib updates and ipsc ipv6 tunnels stat
test data to go allong with it
* add optional -Ih flag
* lint fix
* revert changeed on test data 500d
* fix test data on 60f3g4g
* add poller for mojo cape submit
* mojo_cape_submit poller now works
* add app page for mojo_cape_submit
* add basic generic stat graphs for mojo cape submit
* general size stats graph for mojo_cape_submit
* make sure we update slugs that did not see anything submitted for them
* sort the slugs by sub count
* add app protos graph and sub top 12 graphs
* add mojo cape submit docs
* add tests for mojo_cape_submit
* add mojo_cape_submit to the apps page
* add string helper for mojo_cape_submit
* poke lots of stuff with php-cs-fixer
* remove a unneeded line
* add a missing metric and app data to test
* add logsize poller
* add set size info
* add more stats
* add min size
* more logsize files
* add logsize
* fix creating log file links
* add two new graphs
* add some graphs
* add no_minus_d
* add no minus d to app page
* add count of log files
* save logsizes in app data
* rename title log sizes
* only show top 12
* add mean median and mode
* cleanup naming a bit
* the values for the files hash is now a int instead of another hash
* add new stats and correct median name
* now properly handle unseen
* fix logsize bits
* add combined
* update metrics and add some tests
* add logsize graphs to apps page
* add the logsize bit
* add logszie docs
* add some example alert rules
* style cleanup
* more style cleanup
* fix a few things for metrics and update the test
* fix a variable name in the test and update the data
* Add Calix E7 (EXA) PON port sensors
* oops
* remove space
* skip sensors on down ports
* fix state generic values
* 10 oid was breaking... change to 8 max
* Add initial divisors... need to double check
* change power to dbm as it is more useful
* Add bias and limits
* Test data
* change skip value
* Add PK-SOFTWARE-APPLIANCE-V2 MIB
* Add support for PrimeKey Software Appliance
* Move file to correct path
* Make the OS detection more specific
* Thanks vscode
* Sync filename with osname
* Not supported
* Track SQL database size as volume
* Two fixes
* add suricata_extract
* convert from dervive to gauge and use delta
* add suricata_extract to includes/html/pages/apps.inc.php
* graph cleanup
* add sub_size
* add sub_size graph
* add docs for suricata extract
* add tests for suricata_extract
* add rules for suricata extract
* minor test tweaks
* Convert several JunOS sensors to yaml
Fixes some issues with the php code and reduces extra snmp fetches
* Convert several JunOS sensors to yaml
Fixes some issues with the php code and reduces extra snmp fetches
* Convert BER as well
Allow divisor and multiplier to be set from oid
* use fillValues
* fix
* sort snmprec, fix divide by 0, add more context
* add privoxy
* various style fixes
* cleanup option bar
* save metrics for privoxy now
* add instructions for privoxy
* add privoxy test data
* regen the test data
* add a few missing depends to the instructions
* add apps.inc.php entry for privoxy
* note the required log settings for privoxy
* style fix
* APC Emu dry contacts
* EMU test files
* Added energy and power sensors
* Revert "Added energy and power sensors"
This reverts commit b27b4a3ac2.
* Total energy sensor
* code stuff done for Sneck
* whoops, correct the abs value post adding it post rrd update
* return a array for getting the sneck data and nicely print the raw return value
* add test stuff and freeze time at 1650911765 for tests
* move the freezeTime
* add use Illuminate\Support\Carbon;
* more test changes
* rework freezeTime a bit more
* more test stuff
* another test
* rework it a bit again
* correct variable spelling for $time_diff
* remove freezeTime as we are using a old version of Laravel
* finalize graphs
* misc
* finalize sneck page
* mve the sneck tests as it needs a newer version of laravel than we are using
* add documents for sneck
* finalize the poller
* formatting cleanup
* correct comment type
* correct the spelling of description
* more documentation
* save the check returns as metrics
* add some more examples
* fix some of the sneck alerts and add a few more examples
* turn off time to polling by default
* suggest using ntp if enabled
* since we are zeroing time_to_polling by default, this now works
* backout some suggested changes for once we change to larval 9
* remove del_sneck_data as it is no longer used
* add more docs on the metrics
* php-cs-fixer to fix a few things
* update and fix sneck tests
* remote a metric from the test
* another minor tweak to the test
* one more minor change
* ahh! derp! think I found it finally... hopefully hanging this for the last time...
* now use app data
* now logs check changes
* add a missing )
* add a missing )
* some style fixes
* update the sneck page use to the app data stuff
* update the poller to use the new app data
* misc
* update sneck to log check status changes
* correct alert log messages
* correct a comment
* fix metrics
* derp, another fix
* test fix
* re-order to avoid warning
* poller update
* update sneck graphs
* update sneck graphs
* remove a unneeded line
* test update for discovery
* minor tweaks to the test and fix update the polling a bit
* style fix
* fix return data printing
* fix the test data to include app data
* attempted test fix
* add config def to apps.sneck.polling_time_diff
* cleanup docs a bit
* minor config tweaks
* minor doc cleanup
* add linux_softnet_stat poller
* add graphs and app page for linux_softnet_stat
* fix polling
* rename a few items, clean up the app specific page, and add to the apps page
* convert from derive to counter
* save the budget and budget_usecs to app data
* display current value of the budgets
* now track budget values
* add tests data
* rename it
* add docs for Linux Softnet Stat
* re-order and add budget for app page graph order
* style fix
* correct data location
* fix metrics for the json
* add alerts for ZFS
* add initial l2 bits to the poller for zfs
* more minor tweaks to the ZFS poller
* more zfs bits
* add new ZFS graphs
* begin adding L2 stuff
* add linux_zfs-v3 bits
* update zfs app page
* style fix
* update the data for the zfs legacy test
* test update for zfs v1
* fix some zfs tests
* more zfs v3 test cleanup
* another zfs v3 test data fix
* more zfs v3 test data cleanup
* more test tweaks
* add sensor support for cefcModuleOperStatus
* add tests for cefcModuleOperStatus
* revert sensors/state/cisco.inc.php
* add sensor support for cefcModuleOperStatus using yaml
* update tests for cefcModuleOperStatus
* try adding tests again for cefcModuleOperStatus
* include CISCO-ENTITY-FRU-CONTROL mib for cefcModuleOperStatus sensor state discovery
* Add support for Trellix NSP devices
- Add discovery for mlos NSP devices
- Monitor port statistics from non standard MIBs
- Add Trellix MIBs
- Add test data
* Fix StyleCI findings
* Rename MIB files to match MIB names, remove unused MIBs
* regenerate mlos-nsp_ns9500.json to account for changes from PR#14963
* Fix cisco dbm sensors port link on discovery (NCS55A2)
dBm sensors were not linked to port on Cisco NCS55A2 platform (iosxr)
causing false alarms triggered by optical modules in administratively shut down ports.
* Delete iosxr_ncs55a2.json
* Create iosxr_ncs55a2.json
* Renew test/data/iosxr_ncs55a2.json
* Delete and recreate test/data/iosxr_ncs55a2.json
With command :
./scripts/save-test-data.php -o iosxr -v ncs55a2 -m os,ports,processors,mempools,sensors
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Add support for Trellix ATD devices
- Add discovery for mlos ATD devices
- Monitor various OIDs related to ATD system health and status
- Add required MIBs
- Add test data
* add json test data
* Rename MCAFEE-SMI to MCAFEE-INTRUVERT-SMI
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Expand discovery of gigavue os
- Expand discovery so all Gigamon products are discovered
- Query for hardware version using GIGAMON-SNMP-MIB::model.0 OID if present
- Add more Gigamon gigavue test data
* Create gigavue_hc2.json
Looks like there was no json file before...
* update gigavue_hc2.json
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Update fortivoice.yaml
Add in pulling in device hardware and software info
* Add files via upload
* Add files via upload
* merge test data
* Delete fortivoice_fortivoice.snmprec
* Update fortivoice.json
* Update fortivoice.json
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Add discovery of NVT Phybridge FLEX24
* Update phybridge-flex.yaml
Added FLEX-24 Switch under sysDescr
* Test Data phybridge-flex_flex-24 json and snmprec
